LinuxQuestions.org
Support LQ: Use code LQ3 and save $3 on Domain Registration
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 11-25-2009, 07:28 PM   #1
CPFarmer
LQ Newbie
 
Registered: Jun 2009
Posts: 12

Rep: Reputation: 0
Cant see USB SD Card Reader or Camera after updating to Mandriva 2010


I updated to Mandriva 2010, and now I can't see my digital camera. I thought it might be a bad USB cable, so I bought a USB SD Card reader in an attempt to get my photos off the card. I plug it in and the light on the reader flashes a few times then stops. I can't see it with either Dolphin or Konquerer. I have a JVC Everio Camcorder which shows up as a recenly plugged in device as soon as its plugged in, and I can get my movies off it with no problem.

Here is the output of dmesg

hda-intel: IRQ timing workaround is activated for card #1. Suggest a bigger bdl_pos_adj.
usb 1-5: new high speed USB device using ehci_hcd and address 3
usb 1-5: New USB device found, idVendor=1307, idProduct=0310
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 00000000000006
usb 1-5: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
fuse init (API version 7.12)
scsi 10:0:0:0: Direct-Access Generic USB SD Reader 0.00 PQ: 0 ANSI: 2
sd 10:0:0:0: Attached scsi generic sg4 type 0
sd 10:0:0:0: [sdc] Attached SCSI removable disk
usb-storage: device scan complete
usb 1-5: USB disconnect, address 3
usb 1-5: new high speed USB device using ehci_hcd and address 4
usb 1-5: New USB device found, idVendor=1307, idProduct=0310
usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-5: Product: Mass Storage Device
usb 1-5: Manufacturer: Generic
usb 1-5: SerialNumber: 00000000000006
usb 1-5: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
usb 1-5: USB disconnect, address 4
usb 4-1: new full speed USB device using ohci_hcd and address 2
usb 4-1: device descriptor read/64, error -62
usb 4-1: device descriptor read/64, error -62
usb 4-1: new full speed USB device using ohci_hcd and address 3
usb 4-1: device descriptor read/64, error -62
usb 4-1: device descriptor read/64, error -62
usb 4-1: new full speed USB device using ohci_hcd and address 4
usb 4-1: device not accepting address 4, error -62
usb 4-1: new full speed USB device using ohci_hcd and address 5
usb 4-1: device not accepting address 5, error -62
hub 4-0:1.0: unable to enumerate USB device on port 1
usb 4-1: new full speed USB device using ohci_hcd and address 6
usb 4-1: device descriptor read/64, error -62
usb 4-1: device descriptor read/64, error -62
usb 4-1: new full speed USB device using ohci_hcd and address 7
usb 4-1: device descriptor read/64, error -62
usb 4-1: device descriptor read/64, error -62
usb 4-1: new full speed USB device using ohci_hcd and address 8
usb 4-1: device not accepting address 8, error -62
usb 4-1: new full speed USB device using ohci_hcd and address 9
usb 4-1: device not accepting address 9, error -62
hub 4-0:1.0: unable to enumerate USB device on port 1


Here is the output of lsusb


us 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser

Any help will be greatly apreciated. I'm still fairly new to Linux even though I've been using it since Mandrake 6
 
Old 11-27-2009, 07:09 PM   #2
CPFarmer
LQ Newbie
 
Registered: Jun 2009
Posts: 12

Original Poster
Rep: Reputation: 0
More problems

I tried using different Video players, and all of them play files at twice the normal speed.It doesn't matter if they are on the HDD or from Youtube.

Also, my DVD burners, which are SATA, aren't seen until I put a disk in.Once a disk is put in, they appear in the recently plugged in box.I can't see my second HDD, but in Configure, I can see it and partition it just fine.I'm beginning to think a conf. file is no good.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mandriva LE - Memory stick USB 2.0 card reader silverbirch Mandriva 2 04-26-2005 03:46 AM
Help with Digital Camera Card Reader Dooley Linux - Hardware 2 12-24-2004 11:19 AM
How do I access the built-in camera card reader on my Hp Photosmart 7350? asdfjkl Linux - Hardware 0 10-28-2004 10:20 PM
USB CF card reader for digital camera soujrnr Linux - Hardware 1 07-17-2004 09:22 AM
Digital Camera or Card Reader kazykid22 Linux - Hardware 7 08-14-2003 02:51 PM


All times are GMT -5. The time now is 12:31 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration