I have the Buffalo WLI-PCM-L11GP-3 under SuSE 8.2 Pro and does not work.

Here's the outputs of the info that are of interest:
lsmod

Module Size Used by Not tainted
prism2_cs 63324 1
orinoco_cs 4468 0 (unused)
orinoco 34424 0 [orinoco_cs]
hermes 6016 0 [orinoco_cs orinoco]
snd-pcm-oss 45888 0 (autoclean)
snd-mixer-oss 13560 1 (autoclean) [snd-pcm-oss]
videodev 5600 0 (autoclean)
isa-pnp 29672 0 (unused)
ipv6 134388 -1 (autoclean)
snd-intel8x0 19204 1
snd-pcm 62912 0 [snd-pcm-oss snd-intel8x0]
snd-timer 11904 0 [snd-pcm]
snd-ac97-codec 31152 0 [snd-intel8x0]
snd-mpu401-uart 3360 0 [snd-intel8x0]
snd-rawmidi 13824 0 [snd-mpu401-uart]
snd-seq-device 4000 0 [snd-rawmidi]
snd 35940 0 [snd-pcm-oss snd-mixer-oss snd-intel8x0 snd-pcm snd-timer snd-ac97-codec snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 3396 0 [snd]
p80211 15860 2 [prism2_cs]
ds 6604 4 [prism2_cs orinoco_cs]
yenta_socket 9760 2
pcmcia_core 41824 0 [prism2_cs orinoco_cs ds yenta_socket]
st 27956 0 (autoclean) (unused)
sr_mod 12600 0 (autoclean)
sg 25852 0 (autoclean)
mousedev 4148 0 (unused)
joydev 5632 0 (unused)
evdev 4032 0 (unused)
input 3104 0 [mousedev joydev evdev]
usb-uhci 22096 0 (unused)
usbcore 57836 1 [usb-uhci]
raw1394 14516 0 (unused)
ieee1394 32880 0 [raw1394]
af_packet 12392 2 (autoclean)
3c59x 26064 1
ide-scsi 9296 0
ide-cd 29404 0
cdrom 28192 0 [sr_mod ide-cd]
nls_iso8859-1 2812 1 (autoclean)
nls_cp437 4316 1 (autoclean)
vfat 9548 1 (autoclean)
fat 29752 0 (autoclean) [vfat]
reiserfs 200532 1

dump_cis

Socket 0:
dev_info
NULL 0ns, 512b
attr_dev_info
SRAM 500ns, 1kb
vers_1 5.0, "MELCO", "WLI-PCM-L11", "Version 01.01", ""
manfid 0x0156, 0x0002
funcid network_adapter
lan_technology wireless
lan_speed 1 mb/sec
lan_speed 2 mb/sec
lan_speed 5 mb/sec
lan_speed 11 mb/sec
lan_media 2.4_GHz
lan_node_id 00 02 2d a6 ed 7d
lan_connector Closed connector standard
config base 0x03e0 mask 0x0001 last_index 0x01
cftable_entry 0x01 [default]
Vcc Vmin 4750mV Vmax 5250mV Iavg 300mA Ipeak 300mA
Idown 10mA
io 0x0000-0x003f [lines=6] [16bit]
irq mask 0xffff [level] [pulse]

cardctl ident

Socket 0:
product info: "MELCO", "WLI-PCM-L11", "Version 01.01", ""
manfid: 0x0156, 0x0002
function: 6 (network)


ifconfig

wlan1 Link encap:Ethernet HWaddr 00:00:00:00:00:00
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100


RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:5 Base address:0x180

Its not wlan0 because I have another card (Prism2) that works fine on wlan0.


Thanks in advance to all replies

Terry