mewgle |
09-27-2005 08:11 PM |
Broadcom (BCM94306) + ndiswrapper
I have a problem. I installed ndiswrapper. It works fine afaik. I installed my driver (bcmwl5) and typed ndiswrapper -l and it says driver present, hardware present. Then, I try iwconfig wlan0 and it sees the wireless card.
This is where I am having problems
i do /sbin/iwlist wlan0 scanning
it tells me that my wireless network is there.
When i do iwconfig wlan0 essid "hamlan" i get no error message, and when i go back to iwconfig wlan0 it still says ESSID: off/any
Any ideas whats goin on?
Edit: Sorry, forgot log
Code:
[boco@ ~]$ su
Password:
[root@ boco]# iwlist wlan0 scanning
wlan0 Scan completed :
Cell 01 - Address: 00:11:95:4C:E6:C9
ESSID:"hamlan"
Protocol:IEEE 802.11g
Mode:Managed
Frequency:2.437 GHz (Channel 6)
Quality:0/100 Signal level:-71 dBm Noise level:-256 dBm
Encryption key:on
Bit Rate:1 Mb/s
Bit Rate:2 Mb/s
Bit Rate:5.5 Mb/s
Bit Rate:11 Mb/s
Bit Rate:6 Mb/s
Bit Rate:12 Mb/s
Bit Rate:24 Mb/s
Bit Rate:36 Mb/s
Bit Rate:9 Mb/s
Bit Rate:18 Mb/s
Bit Rate:48 Mb/s
Bit Rate:54 Mb/s
Extra:bcn_int=100
Extra:atim=0
[root@ boco]# iwconfig wlan0 essid hamlan
[root@ boco]# iwconfig wlan0
wlan0 IEEE 802.11g ESSID:off/any Nickname:"PortaBoco"
Mode:Managed Frequency:2.412 GHz Access Point: 00:00:00:00:00:00
Bit Rate=54 Mb/s Tx-Power:25 dBm
RTS thr=2347 B Fragment thr=2346 B
Encryption key:off
Power Management:off
Link Quality:100/100 Signal level:-10 dBm Noise level:-256 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
[root@ boco]# ndiswrapper -l
Installed ndis drivers:
bcmwl5a.ini driver present, hardware present
|