LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
Search this Thread
Old 08-03-2005, 08:26 AM   #16
Be.Gurmeet.Be
Member
 
Registered: Jul 2005
Location: Punjab - [ India ]
Distribution: OpenSuSE 10.0 x86_64 Edition. & Mandriva Linux 2006 x86_64 Edition.
Posts: 67

Rep: Reputation: 15

Dear ' izelpii ' , the goalie , khuazor ,gurpy and all.

my name is Be.Gurmeet.Be , though i joined this forum a couple of weeks before and posted a few threads independently. but i am a hgihly experinced user of Linux Particularly of SuSE and Mandrake(now Mandriva). I have been using linux since last 5 years.

till yesterday , i was so happy and overjoyed since i got new AMD 64 BIt 939 PIN processor with 17" TFT Monitor ( Resolution :: 1280 X 1024 ) . with 2 GB RAM.

Here , i made a mitake that i bought MSI motherboard integrated with ' ATI Radeon XPRESS 200 Series "' Graphics Adapter.

My all excitement fleed when i found that SuSE Linux 9.3 X86_64 Pro is unable to install my ATI Graphics.

Now i read your thread and replies to each other that ATI is a big issue with Linux.

HOW TERRIBLE IT IS THAT WORLD'S MOST USED AND POWERFUL GRAPHICS CARD IS NOT SUPPORTED BY WORLD'S MOST POWERFUL LINUX (SuSE) .

PLEASE FRIENDS, guide me what should i do, i am highly disappointed since i spend near about 40,000/- Indian BUCKS for buying my Computer
One thing is clear that if this problem remains for one or two weeks , i am going to discard LINUX forever.

I will distroy all the Media of Linux. NOT ONLY SUSE , every distro , MANDRIVA, KNOPPIX, etc.

Please help me any body, please help me to make me faith in LlINUX.

- Bye bye
 
Old 08-03-2005, 02:43 PM   #17
izelpii
LQ Newbie
 
Registered: Jul 2005
Posts: 16

Original Poster
Rep: Reputation: 0
Talking At last!

OK, NOW IT WORKS FOR 1280X800 :d :d :d

ATI just released (I don't know exactly when) the ATI Radeon xpress 200 version of their 8.14.3 drivers .

Go here:

https://support.ati.com/ics/support/...asp?deptID=894

Here is my xorg.conf ( IT IS CHANGED FROM THE ONE FROM ATI, so as always, use it on your OWN risk):


# File: xorg.conf
# File generated by fglrxconfig (C) ATI Research, a substitute for xf86config.

# Note by ATI: the below copyright notice is there for servicing possibly
# pending third party rights on the file format and the instance of this file.
#
# Copyright (c) 1999 by The XFree86 Project, Inc.
#
# Permission is hereby granted, free of charge, to any person obtaining a
# copy of this software and associated documentation files (the "Software"),
# to deal in the Software without restriction, including without limitation
# the rights to use, copy, modify, merge, publish, distribute, sublicense,
# and/or sell copies of the Software, and to permit persons to whom the
# Software is furnished to do so, subject to the following conditions:
#
# The above copyright notice and this permission notice shall be included in
# all copies or substantial portions of the Software.
#
# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
# THE XFREE86 PROJECT BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
# WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF
# OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
# SOFTWARE.
#
# Except as contained in this notice, the name of the XFree86 Project shall
# not be used in advertising or otherwise to promote the sale, use or other
# dealings in this Software without prior written authorization from the
# XFree86 Project.
#

# **********************************************************************
# Refer to the XF86Config(4/5) man page for details about the format of
# this file.
# **********************************************************************

# **********************************************************************
# DRI Section
# **********************************************************************
Section "dri"
# Access to OpenGL ICD is allowed for all users:
Mode 0666
# Access to OpenGL ICD is restricted to a specific user group:
# Group 100 # users
# Mode 0660
EndSection

# **********************************************************************
# Module section -- this section is used to specify
# which dynamically loadable modules to load.
# **********************************************************************
#
Section "Module"

# This loads the DBE extension module.

Load "dbe" # Double buffer extension

# This loads the miscellaneous extensions module, and disables
# initialisation of the XFree86-DGA extension within that module.
SubSection "extmod"
Option "omit xfree86-dga" # don't initialise the DGA extension
EndSubSection

# This loads the Type1 and FreeType font modules
Load "type1"
Load "freetype"

# This loads the GLX module
Load "glx" # libglx.a
Load "dri" # libdri.a

EndSection

# **********************************************************************
# Files section. This allows default font and rgb paths to be set
# **********************************************************************

Section "Files"

# The location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

RgbPath "/usr/X11R6/lib/X11/rgb"

# Multiple FontPath entries are allowed (which are concatenated together),
# as well as specifying multiple comma-separated entries in one FontPath
# command (or a combination of both methods)
#
# If you don't have a floating point coprocessor and emacs, Mosaic or other
# programs take long to start up, try moving the Type1 and Speedo directory
# to the end of this list (or comment them out).
#

FontPath "/usr/X11R6/lib/X11/fonts/local/"
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1/"
# FontPath "/usr/X11R6/lib/X11/fonts/Speedo/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi/"

# The module search path. The default path is shown here.

# ModulePath "/usr/X11R6/lib/modules"

EndSection

# **********************************************************************
# Server flags section.
# **********************************************************************

Section "ServerFlags"

# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging

# Option "NoTrapSignals"

# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.

# Option "DontZap"

# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.

# Option "Dont Zoom"

# Uncomment this to disable tuning with the xvidtune client. With
# it the client can still run and fetch card and monitor attributes,
# but it will not be allowed to change them. If it tries it will
# receive a protocol error.

# Option "DisableVidModeExtension"

# Uncomment this to enable the use of a non-local xvidtune client.

# Option "AllowNonLocalXvidtune"

# Uncomment this to disable dynamically modifying the input device
# (mouse and keyboard) settings.

# Option "DisableModInDev"

# Uncomment this to enable the use of a non-local client to
# change the keyboard or mouse settings (currently only xset).

# Option "AllowNonLocalModInDev"

EndSection

# **********************************************************************
# Input devices
# **********************************************************************

# **********************************************************************
# Core keyboard's InputDevice section
# **********************************************************************

Section "InputDevice"

Identifier "Keyboard1"
Driver "kbd"
# For most OSs the protocol can be omitted (it defaults to "Standard").
# When using XQUEUE (only for SVR3 and SVR4, but not Solaris),
# uncomment the following line.

# Option "Protocol" "Xqueue"

Option "AutoRepeat" "500 30"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# Option "LeftAlt" "Meta"
# Option "RightAlt" "ModeShift"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"

# These are the default XKB settings for XFree86
# Option "XkbRules" "xfree86"
# Option "XkbModel" "pc101"
# Option "XkbLayout" "us"
# Option "XkbVariant" ""
# Option "XkbOptions" ""

# Option "XkbDisable"

Option "XkbRules" "xfree86"
Option "XkbModel" "pc101"
Option "XkbLayout" "us"

EndSection


# **********************************************************************
# Core Pointer's InputDevice section
# **********************************************************************

Section "InputDevice"

# Identifier and driver

Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ImPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/input/mice"

# When using XQUEUE, comment out the above two lines, and uncomment
# the following line.

# Option "Protocol" "Xqueue"

# Baudrate and SampleRate are only for some Logitech mice. In
# almost every case these lines should be omitted.

# Option "BaudRate" "9600"
# Option "SampleRate" "150"

# Emulate3Buttons is an option for 2-button Microsoft mice
# Emulate3Timeout is the timeout in milliseconds (default is 50ms)

# Option "Emulate3Buttons"
# Option "Emulate3Timeout" "50"

# ChordMiddle is an option for some 3-button Logitech mice

# Option "ChordMiddle"

EndSection


# **********************************************************************
# Other input device sections
# this is optional and is required only if you
# are using extended input devices. This is for example only. Refer
# to the XF86Config man page for a description of the options.
# **********************************************************************
#
# Section "InputDevice"
# Identifier "Mouse2"
# Driver "mouse"
# Option "Protocol" "MouseMan"
# Option "Device" "/dev/mouse2"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball"
# Driver "magellan"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "spaceball2"
# Driver "spaceorb"
# Option "Device" "/dev/cua0"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen0"
# Driver "microtouch"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "1412"
# Option "MaxX" "15184"
# Option "MinY" "15372"
# Option "MaxY" "1230"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection
#
# Section "InputDevice"
# Identifier "touchscreen1"
# Driver "elo2300"
# Option "Device" "/dev/ttyS0"
# Option "MinX" "231"
# Option "MaxX" "3868"
# Option "MinY" "3858"
# Option "MaxY" "272"
# Option "ScreenNumber" "0"
# Option "ReportingMode" "Scaled"
# Option "ButtonThreshold" "17"
# Option "ButtonNumber" "1"
# Option "SendCoreEvents"
# EndSection

Section "Modes"

# 1280x800 @ 60.00 Hz (GTF) hsync: 49.68 kHz; pclk: 83.46 MHz
Identifier "16:10"
ModeLine "1280x800_60.00" 83.5 1280 1344 1480 1680 800 801 804 828 -hsync +vsync
EndSection

# **********************************************************************
# Monitor section
# **********************************************************************

# Any number of monitor sections may be present


Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1280x800"
UseModes "16:10"
#HorizSync 31.5 - 90.0
VertRefresh 60.0 - 60.0
Option "dpms"
EndSection

# **********************************************************************
# Graphics device section
# **********************************************************************

# Any number of graphics device sections may be present

# Standard VGA Device:

Section "Device"
Identifier "Standard VGA"
VendorName "Unknown"
BoardName "Unknown"

# The chipset line is optional in most cases. It can be used to override
# the driver's chipset detection, and should not normally be specified.

# Chipset "generic"

# The Driver line must be present. When using run-time loadable driver
# modules, this line instructs the server to load the specified driver
# module. Even when not using loadable driver modules, this line
# indicates which driver should interpret the information in this section.

Driver "vga"
# The BusID line is used to specify which of possibly multiple devices
# this section is intended for. When this line isn't present, a device
# section can only match up with the primary video device. For PCI
# devices a line like the following could be used. This line should not
# normally be included unless there is more than one video device
# installed.

# BusID "PCI:0:10:0"

# VideoRam 256

# Clocks 25.2 28.3

EndSection

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000000"
Option "MonitorLayout" "AUTO, AUTO"
Option "IgnoreEDID" "off"
Option "HSync2" "unspecified"
Option "VRefresh2" "unspecified"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
# BusID "PCI:1:0:0" # no device found at config time
Screen 0
EndSection

# **********************************************************************
# Screen sections
# **********************************************************************

# Any number of screen sections may be present. Each describes
# the configuration of a single screen. A single specific screen section
# may be specified from the X server command line with the "-screen"
# option.
Section "Screen"
Identifier "Screen0"
Device "ATI Graphics Adapter"
Monitor "Monitor0"
DefaultDepth 24
#Option "backingstore"

SubSection "Display"
Viewport 0 0
Depth 16
Modes "1280x800" "1280x1024" "1152x864" "1024x768" "800x600"
"640x480"
EndSubSection

EndSection

# **********************************************************************
# ServerLayout sections.
# **********************************************************************

# Any number of ServerLayout sections may be present. Each describes
# the way multiple screens are organised. A specific ServerLayout
# section may be specified from the X server command line with the
# "-layout" option. In the absence of this, the first section is used.
# When now ServerLayout section is present, the first Screen section
# is used alone.

Section "ServerLayout"

# The Identifier line must be present
Identifier "Server Layout"

# Each Screen line specifies a Screen section name, and optionally
# the relative position of other screens. The four names after
# primary screen name are the screens to the top, bottom, left and right
# of the primary screen.

Screen "Screen0"

# Each InputDevice line specifies an InputDevice section name and
# optionally some options to specify the way the device is to be
# used. Those options include "CorePointer", "CoreKeyboard" and
# "SendCoreEvents".

InputDevice "Mouse1" "CorePointer"
InputDevice "Keyboard1" "CoreKeyboard"

EndSection

### EOF ###
 
Old 08-03-2005, 02:45 PM   #18
izelpii
LQ Newbie
 
Registered: Jul 2005
Posts: 16

Original Poster
Rep: Reputation: 0
A comment

Hey, just as a comment, the card works and gives a correct native resolution, I'm still trying to figure it out why the acceleration is not working.
 
Old 08-03-2005, 05:21 PM   #19
hr_phenom
LQ Newbie
 
Registered: May 2004
Distribution: Fedora
Posts: 25

Rep: Reputation: 15
I couldn't find anything from the link that you gave in the previous post. Is there anyother link?
 
Old 08-03-2005, 06:16 PM   #20
izelpii
LQ Newbie
 
Registered: Jul 2005
Posts: 16

Original Poster
Rep: Reputation: 0
Sorry, my fault

Sorry.

http://www2.ati.com/drivers/linux/fg...3.4-1.i386.rpm


Go to:

http://www.ati.com
click on "Drivers & Software" at the top right.
click on "Linux Drivers and Software"
click on "Motherboards with ATI Graphics" under Linux x86
click on "ATI Proprietary Linux x86 Driver 8.13.4 for Radeon Xpress 200 Series"

I selected the xorg.conf. I'm not totally sure, but I think they upgraded the version for Radeon Xpress 200. The old one was one version older, and it didn't work. I couldn't manage to make the acceleration works propertly yet, but at least, is functional, with my native resolution WXGA (which was driving me crazy).
 
Old 08-03-2005, 07:55 PM   #21
thegoalie
LQ Newbie
 
Registered: Nov 2003
Distribution: slackware fedora core gentoo debian free bsd
Posts: 29

Rep: Reputation: 15
man this is ridiculous that you have to do that . i hate ATI cards for that reason . at least nvidia cards are easy to install and configure as long as you have the kernel sources installed. the nforce motherboards are easy as well so i dont know i think the next time you get a computer i suggest nvidia
 
Old 08-05-2005, 04:14 AM   #22
Be.Gurmeet.Be
Member
 
Registered: Jul 2005
Location: Punjab - [ India ]
Distribution: OpenSuSE 10.0 x86_64 Edition. & Mandriva Linux 2006 x86_64 Edition.
Posts: 67

Rep: Reputation: 15
Hi , ""''' kuhazor """" , this is direct address to you.

You 1st reply completely CONTRIDICTS to your 3rd Reply. Sorry to say : but are you not making people confused. in first reply your are saying that your ATI Radeon XPRESS 200 Card is working absolutely fine. and in third and further replies you explain some thing contrary. What is this ?

which your reply is genuine one.

Or

should i ask you pleasee that did you configure your ATI Graphics Card yourself and running fine now or SuSE 9.3 installed it itseld by default.

Please, make things clear, i am really desperate, since so far i am unable to make my ATI Graphics card working in Llinux.

Let me tell you that, i am the person in my city who made Linux popular . I set a fashion os using LINUX in my city. I motivated alleast 200 people to use Linux .

But now i am facing this problem and could not see any hope since nobody is answering me relevantely on this forum. Can you believe it ' 0 ' replies came to my independant Thread about ATI GRaphics card problem.

I am losing hope and faith on this forum.

any way

-regards.
 
Old 08-05-2005, 08:31 AM   #23
Be.Gurmeet.Be
Member
 
Registered: Jul 2005
Location: Punjab - [ India ]
Distribution: OpenSuSE 10.0 x86_64 Edition. & Mandriva Linux 2006 x86_64 Edition.
Posts: 67

Rep: Reputation: 15
hi all,

i did the following to install my ATI Radeon XPress 200G Graphics Card Drivers.

1. i downloaded the ati driver.rpm from www.ati.com
2. installed it with rpm -Uvh --force [filename.rpm] . it installed successfully.
3. Then, i copied the 2 patches from on thread and saved them in /lib/modules/fglrx/build_mod directory.
and ran it . it executed successfully.
4.Then i run the command sh make.sh & sh make_install.sh



Here i got problem. when i run first command ,

it gives the out put
'
ATI module generator V 2.0
==========================
initializing...
kernel includes at /usr/src/linux/include not found or incomplete
file: /usr/src/linux/include/linux/version.h
'

and the output of ' sh make_install.sh ' command is as following...

'
Tailored kernel module for fglrx not present in your system.
You must go to /lib/modules/fglrx/build_mod subdir
and execute './make.sh' to build a fully customed kernel module.
Afterwards go to /lib/modules/fglrx and run './make_install.sh'
in order to install the module into your kernel's module repository.
(see readme.txt for more details.)

As of now you can still run your XServer in 2D, but hardware acclerated
OpenGL will not work and 2D graphics will lack performance.

failed.
'
Any idea.
 
Old 08-05-2005, 09:05 AM   #24
thegoalie
LQ Newbie
 
Registered: Nov 2003
Distribution: slackware fedora core gentoo debian free bsd
Posts: 29

Rep: Reputation: 15
man this is the thing you guys are not putting the kernel source in to build the module or at least thats the impression i am getting. most graphics cards build a kernel module for their type of card. so what i would do i get the kernel source and build the drivers to the specification of the machine not the vendors specs this way here you know what kernel is installed because you built it yourself


by the way ati 3d acceleration in linux isnt the greatest i have seen alot of people having trouble with that one




Last edited by thegoalie; 08-05-2005 at 09:09 AM.
 
Old 08-05-2005, 01:11 PM   #25
Be.Gurmeet.Be
Member
 
Registered: Jul 2005
Location: Punjab - [ India ]
Distribution: OpenSuSE 10.0 x86_64 Edition. & Mandriva Linux 2006 x86_64 Edition.
Posts: 67

Rep: Reputation: 15
Quote:
Originally posted by thegoalie
man this is the thing you guys are not putting the kernel source in to build the module or at least thats the impression i am getting.
Yes, I knew it, but dear 'thegoalie' . please explain how to do that. i know nothing about putting the kernel source in to build the module.

please help, because every thing else is alright , if i do this job too then i can get the best graphics.

i don't need 3D support. i need only my 1280 x 1024 Resolution with 24 BIT colors. That's it.

I don't want to play 3D games or work in 3D graphics enviourment.

-
Thanks & regards.
 
Old 08-05-2005, 08:01 PM   #26
thegoalie
LQ Newbie
 
Registered: Nov 2003
Distribution: slackware fedora core gentoo debian free bsd
Posts: 29

Rep: Reputation: 15
go to rpm.pbone.net and search for kernel-source-*.*.*.rpm and install it normally like you install all rpm packages. then it will but in all the kernel source code and then you will have the nessasery code to install the driver. or if you wish you can download the source code from kernel.org then unbzip it in /usr/src then link it to the /usr/src/linux then you invoke the menufconfig by typing in the terminal make menuconfig or if you want to use kdes menu type xconfig or gnomes menu gconfig. then you check the driver menu and go through all the different catergories and choose whats in your computer the save the configuration. then you type make && make modules_install then when it is compiled you type in make install and it will install the kernel into your system and update your grub for the new kernel. then you click on the link on the bottom named drivers and download the driver then telinit 3 and install the driver then you make the nessary changes to your modules.conf or whatever configuration file that autolaods your modules on startup and change your xorg.conf file to the setting you wanted the x to work in and voila it is done you have your card up and running.



i hope this was helpful to everyone and Be.Gurmeet.Be keep telling people about linux because it is a really good system and we need people like you to make it mainstreamdrivers

Last edited by thegoalie; 08-05-2005 at 08:06 PM.
 
Old 08-06-2005, 10:35 AM   #27
hr_phenom
LQ Newbie
 
Registered: May 2004
Distribution: Fedora
Posts: 25

Rep: Reputation: 15
Talking Re: just in case

Quote:
Originally posted by izelpii
[B]Hey,

Just in case:

output of dmesg:

Linux version 2.6.11-1.1369_FC4 (bhcompile@decompose.build.redhat.com) (gcc version 4.0.0 20050525 (Red Hat 4.0.0-9)) #1 Thu Jun 2 22:55:56 EDT 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000001beb0000 (usable)
BIOS-e820: 000000001beb0000 - 000000001beb8000 (ACPI data)
BIOS-e820: 000000001beb8000 - 000000001bf00000 (ACPI NVS)
BIOS-e820: 000000001bf00000 - 000000001c000000 (reserved)
BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
446MB LOWMEM available.
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 114352
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 110256 pages, LIFO batch:31
HighMem zone: 0 pages, LIFO batch:1
DMI present.
ACPI: RSDP (v000 TOSINV ) @ 0x000f7840
ACPI: RSDT (v001 TOSINV RSDT 0x06040000 LTP 0x00000000) @ 0x1beb42b0
ACPI: FADT (v001 TOSINV Goldfish 0x06040000 ATI 0x000f4240) @ 0x1beb7ef6
ACPI: MADT (v001 TOSINV APIC 0x06040000 LTP 0x00000000) @ 0x1beb7f6a
ACPI: MCFG (v001 TOSINV MCFG 0x06040000 LTP 0x00000000) @ 0x1beb7fc4
ACPI: SSDT (v001 TOSINV Cpu0Cst 0x00003001 INTL 0x20030224) @ 0x1beb44e3
ACPI: SSDT (v001 TOSINV CpuPm 0x00003000 INTL 0x20030224) @ 0x1beb42e8
ACPI: DSDT (v001 TOSINV SB400 0x06040000 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x8008
Allocating PCI resources starting at 1c000000 (gap: 1c000000:c4000000)
Built 1 zonelists
Kernel command line: ro root=LABEL=/1 rhgb quiet
Initializing CPU#0
CPU 0 irqstacks, hard=c0457000 soft=c0456000
PID hash table entries: 2048 (order: 11, 32768 bytes)
Detected 1496.987 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 447916k/457408k available (2518k kernel code, 8868k reserved, 690k data, 180k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2949.12 BogoMIPS (lpj=1474560)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: After vendor identify, caps: afe9fbff 00000000 00000000 00000000 00000000 00000000 00000000
CPU: L1 I cache: 32K, L1 D cache: 32K
CPU: L2 cache: 1024K
CPU: After all inits, caps: afe9f3ff 00000000 00000000 00000040 00000000 00000000 00000000
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: Intel(R) Celeron(R) M processor 1.50GHz stepping 08
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
ACPI: setting ELCR to 0200 (from 0800)
checking if image is initramfs... it is
Freeing initrd memory: 1081k freed
softlockup thread 0 started up.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfd84c, last bus=4
PCI: Using MMCONFIG
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20050309
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
Boot video device is 0000:01:05.0
PCI: Transparent bridge - 0000:00:14.4
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 10 11) *0, disabled.
ACPI: Embedded Controller [EC0] (gpe 7)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: Power Resource [PFA1] (off)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 9 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
pnp: 00:07: ioport range 0x1080-0x1080 has been reserved
pnp: 00:07: ioport range 0x220-0x22f has been reserved
pnp: 00:07: ioport range 0x400-0x401 has been reserved
pnp: 00:07: ioport range 0x40b-0x40b has been reserved
apm: BIOS not found.
audit: initializing netlink socket (disabled)
audit(1121287590.948:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 42BD35A990375F72
- User ID: Red Hat, Inc. (Kernel Module GPG key)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Fan [FAN1] (off)
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Thermal Zone [TZCR] (53 C)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 76 ports, IRQ sharing enabled
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:14.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ATIIXP: IDE controller at PCI slot 0000:00:14.1
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:14.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
ATIIXP: chipset revision 0
ATIIXP: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x8430-0x8437, BIOS settings: hdaMA, hdbio
ide1: BM-DMA at 0x8438-0x843f, BIOS settings: hdcMA, hddio
Probing IDE interface ide0...
hda: FUJITSU MHV2080AH, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: MATSHITADVD-RAM UJ-840S, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 156301488 sectors (80026 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 24X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 1024 buckets, 32Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 6, 458752 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
LID OHC1 OHC2 EHCI P2P LANC AUDO MODM
ACPI: (supports S0 S3 S4 S5)
Freeing unused kernel memory: 180k freed
input: AT Translated Set 2 keyboard on isa0060/serio0
EXT3-fs: INFO: recovery required on readonly filesystem.
EXT3-fs: write access will be enabled during recovery.
Synaptics Touchpad, model: 1
Firmware: 6.2
180 degree mounted touchpad
Sensor: 37
new absolute packet format
Touchpad has extended capability bits
-> multifinger detection
-> palm detection
synaptics: Toshiba Satellite detected, limiting rate to 40pps.
input: SynPS/2 Synaptics TouchPad on isa0060/serio1
kjournald starting. Commit interval 5 seconds
EXT3-fs: hda2: orphan cleanup on readonly fs
ext3_orphan_cleanup: deleting unreferenced inode 12259580
ext3_orphan_cleanup: deleting unreferenced inode 12257871
ext3_orphan_cleanup: deleting unreferenced inode 12257870
ext3_orphan_cleanup: deleting unreferenced inode 11829308
ext3_orphan_cleanup: deleting unreferenced inode 11829299
ext3_orphan_cleanup: deleting unreferenced inode 11829294
ext3_orphan_cleanup: deleting unreferenced inode 12652728
EXT3-fs: hda2: 7 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
security: 3 users, 6 roles, 824 types, 93 bools
security: 55 classes, 194544 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev hda2, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), not configured for labeling
SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for labeling
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
floppy0: no floppy controllers found
ath_hal: no version for "struct_module" found: kernel tainted.
ath_hal: module license 'Proprietary' taints kernel.
ath_hal: 0.9.14.9 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413)
wlan: 0.8.4.5 (EXPERIMENTAL)
ath_rate_onoe: 1.0
ath_pci: 0.9.4.12 (EXPERIMENTAL)
ACPI: PCI Interrupt 0000:02:04.0[A] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
ath0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
ath0: mac 7.8 phy 4.5 radio 5.6
ath0: 802.11 address: 00:11:f5:6c:91:e0
ath0: Use hw queue 0 for WME_AC_BE traffic
ath0: Use hw queue 1 for WME_AC_BK traffic
ath0: Use hw queue 2 for WME_AC_VI traffic
ath0: Use hw queue 3 for WME_AC_VO traffic
ath0: Atheros 5212: mem=0xc0200000, irq=11
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
eth0: RealTek RTL8139 at 0xa000, 00:a0:d1:21:60:ca, IRQ 11
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
snd_atiixp: Unknown parameter `'
ACPI: PCI Interrupt 0000:00:14.5 -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
shpchp: shpc_init : shpc_cap_offset == 0
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:13.2[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ehci_hcd 0000:00:13.2: EHCI Host Controller
ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:13.2: irq 11, io mem 0xc0002000
ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.0: OHCI Host Controller
ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:13.0: irq 11, io mem 0xc0000000
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 4 ports detected
ACPI: PCI Interrupt 0000:00:13.1[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
ohci_hcd 0000:00:13.1: OHCI Host Controller
ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:13.1: irq 11, io mem 0xc0001000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI Interrupt 0000:02:06.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
Yenta: CardBus bridge found at 0000:02:06.0 [1179:ff10]
yenta 0000:02:06.0: Preassigned resource 0 busy, reconfiguring...
Yenta: Enabling burst memory read transactions
Yenta: Using CSCINT to route CSC interrupts to PCI
Yenta: Routing CardBus interrupts to PCI
Yenta TI: socket 0000:02:06.0, mfunc 0x01111122, devctl 0x64
Yenta: ISA IRQ mask 0x04f8, PCI irq 11
Socket status: 30000006
ACPI: AC Adapter [ADP0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.4.0-ioctl (2005-01-12) initialised: dm-devel@redhat.com
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
Buffer I/O error on device hdc, logical block 1
Buffer I/O error on device hdc, logical block 2
Buffer I/O error on device hdc, logical block 3
Buffer I/O error on device hdc, logical block 4
Buffer I/O error on device hdc, logical block 5
Buffer I/O error on device hdc, logical block 6
Buffer I/O error on device hdc, logical block 7
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 03 92 80 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 936448
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 10 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
Buffer I/O error on device hdc, logical block 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 03 92 80 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 936448
hdc: command error: status=0x51 { DriveReady SeekComplete Error }
hdc: command error: error=0x51 { IllegalLengthIndication LastFailedSense=0x05 }
ide: failed opcode was: unknown
ATAPI device hdc:
Error: Illegal request -- (Sense key=0x05)
Illegal mode for this track or incompatible medium -- (asc=0x64, ascq=0x00)
The failed "Read 10" packet command was:
"28 00 00 00 00 00 00 00 02 00 00 00 00 00 00 00 "
end_request: I/O error, dev hdc, sector 0
EXT3 FS on hda2, internal journal
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 530136k swap on /dev/hda3. Priority:-1 extents:1
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (3573 buckets, 28584 max) - 272 bytes per conntrack
cs: IO port probe 0xc00-0xcff: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf 0xcf8-0xcff
cs: IO port probe 0x800-0x8ff: excluding 0x878-0x87f
cs: IO port probe 0x100-0x4ff: excluding 0x4d0-0x4d7
cs: IO port probe 0xa00-0xaff: clean.
eth0: link down
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
Bluetooth: Core ver 2.7
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.7
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM ver 1.5
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
i2c /dev entries driver
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
lp: driver loaded but no devices found
NET: Registered protocol family 10
Disabled Privacy Extensions on device c03e6820(lo)
IPv6 over IPv4 tunneling driver
ath0: no IPv6 routers present
audit(:1093177): major=252 name_count=0: freeing multiple contexts (1)
Hey,
This xorg.conf worked for me. I'm now running at 1280x800 .
Now to get the wireless setup...

Thanks,
 
Old 08-06-2005, 12:44 PM   #28
Be.Gurmeet.Be
Member
 
Registered: Jul 2005
Location: Punjab - [ India ]
Distribution: OpenSuSE 10.0 x86_64 Edition. & Mandriva Linux 2006 x86_64 Edition.
Posts: 67

Rep: Reputation: 15
Dear " thegoalie " ,

i installed Kernel Source successfully and repeated the following steps after installing it...

1. rpm -Uh --force fglrx.*.*.rpm


The driver installed but at the end it gives a message.

" FATAL : Can not Insert fglrx (/usr/src/kernel 2.6.11.default/drm..................../fglrx.ko) NO SUCH DEVICE. "


Any way , i assume it installed the fglrx driver. and i took 2nd step.

2. patch -p0 <patch1.patch & patch -p0 <patch2.patch &

As a out put some HUNKs Fails and Some HUNKS Succeeded.

3. ./make.sh

It give an error.

4. .make_install.sh

Also gives error.


I mean to say, situation worsened since i installe " Kernel-Source....rpm " into the system.

Almost on every command system creates errors.

Any way,

I also tried the Contents of your 'xorg.conf' File.

With this, one thing POSITIVE happened

i run ' sax2 ' ,

Now it shows, 2 Graphics Card Detected and Installed .

1. Unknown Unknown

2. " fglrx "

And resolution also set to DESIRED 1280 x 1024 ( Philips 17" TFT ) & 24 BIT colors. [ This what i want ]

But when clicked on ' Test' button ,

x Server Crashes.

It does not matter, which card SuSE installed,

WHAT I REQUIRE IS RESOLUTION : 1280 X 1024 AND 24 BIT COLORS.

what is and WHERE Is something WRONG. ?

ONE LAST , SOME THREADS ON THIS FORUM ARE TALKING TO RUN ONLY ONE PATCH - DIFFERENT FOR AMD PROCESSOR AND OTHER FOR PENTIUM.

PLEASE TELL ME ONE THING, VERY VERY HONESTLY AND FRIENDLY

DOES LINUX SUPPORT " ATI RADEON XPRESS 200G GRAPHICS CARD " OR NOT

I MEAN , ARE THERE ANY CHANCES OF SUCCESSFUL INSTALLATION, OR NOT ?

BECAUSE I KNOW IF LINUX WOULD HAVE been ABLE TO INSTALL IT , THEN LINUX WOULD HAVE INSTALLED IT BY DEFAULT.

IS IT NOT SO ?

REAGRDS.

THANKS FOR REPLYING.
 
Old 08-06-2005, 08:42 PM   #29
thegoalie
LQ Newbie
 
Registered: Nov 2003
Distribution: slackware fedora core gentoo debian free bsd
Posts: 29

Rep: Reputation: 15
ok just download the newest kernel from kernel.org and compile it and run the source package from ati.com and that should do the trick because to me it sounds like the rpm is more for redhat or mandrake . just copy the config from boot to the /usr/src/linux folder and rename it .config and it will keep the config of the kernel you are running and compile it that way then you make and make modules_install then make install and it will do the rest then reboot to the new kernel then compile the drivers and modprobe it then edit your xorg.conf then startx then you are laughing


 
Old 08-07-2005, 01:24 PM   #30
Be.Gurmeet.Be
Member
 
Registered: Jul 2005
Location: Punjab - [ India ]
Distribution: OpenSuSE 10.0 x86_64 Edition. & Mandriva Linux 2006 x86_64 Edition.
Posts: 67

Rep: Reputation: 15
how to do that ?
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
8.6.20 ATI Drivers and ATI Radeon XPress 200M ltracy Linux - Hardware 8 04-28-2006 07:52 PM
driver prob: ATI Radeon Xpress 200 M on Fedora Core 4 amd x86_64 trouble pppoe_dude Linux - Hardware 34 04-27-2006 07:28 AM
Graphic accelaration on ATI Radeon Xpress 200 series seshank Linux - Software 1 12-18-2005 05:41 PM
Graphic accelaration on ATI Radeon Xpress 200 series seshank Fedora 3 10-20-2005 03:22 AM
3D on FC4 x86_64 w/integrated Radeon Xpress 200, any help? etienne1415 Fedora 1 07-18-2005 10:02 PM


All times are GMT -5. The time now is 06:29 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration