LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Hardware (http://www.linuxquestions.org/questions/linux-hardware-18/)
-   -   ATI Radeon Mobility 9000 / XFree86 fglrx configuration question (http://www.linuxquestions.org/questions/linux-hardware-18/ati-radeon-mobility-9000-xfree86-fglrx-configuration-question-147872/)

ovidiu77 02-18-2004 11:28 PM

ATI Radeon Mobility 9000 / XFree86 fglrx configuration question
 
Hi,

I was wondering if it is possible to configure an ATI fglrx XFree86 driver to allow different resolution and refresh rate on a laptop's default LCD screen and its external monitor.

I have a Fujitsu Lifebook N Series, with an ATI Radeon Mobility 9000 card (M9 RV250 LG chipset), running RedHat 9.0 / XFree86 4.3.0. I installed the latest ATI fglrx driver (fglrx-glc22-4.3.0-3.7.0.i386.rpm) and I configured it so I get a cloned output (LCD display and an external CRT monitor). However, I don't know if it possible and how to get different resolutions on the LCD and the CRT. They both run at 1400x1050, which is the LCD's native resolution.

Thanks for any suggestions you may have.

Attached is the driver section of the XF86Config-4:

-- STARTS XF86Config-4 FRAGMENT --------------------------------------------------

# === ATI device section ===

Section "Device"
Identifier "ATI Graphics Adapter"
Driver "fglrx"
# ### generic DRI settings ###
# === disable PnP Monitor ===
#Option "NoDDC"
# === disable/enable XAA/DRI ===
Option "no_accel" "no"
Option "no_dri" "no"
# === misc DRI settings ===
Option "mtrr" "off" # disable DRI mtrr mapper, driver has its own code for mtrr
# ### FireGL DDX driver module specific settings ###
# === Screen Management ===
Option "DesktopSetup" "0x00000100"
Option "MonitorLayout" "LVDS, CRT"
Option "IgnoreEDID" "off"
Option "HSync2" "31.5-105"
Option "VRefresh2" "60-120"
Option "ScreenOverlap" "0"
# === TV-out Management ===
Option "NoTV" "yes"
Option "TVStandard" "NTSC-M"
Option "TVHSizeAdj" "0"
Option "TVVSizeAdj" "0"
Option "TVHPosAdj" "0"
Option "TVVPosAdj" "0"
Option "TVHStartAdj" "0"
Option "TVColorAdj" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
# === OpenGL specific profiles/settings ===
Option "Capabilities" "0x00000000"
# === Video Overlay for the Xv extension ===
Option "VideoOverlay" "on"
# === OpenGL Overlay ===
# Note: When OpenGL Overlay is enabled, Video Overlay
# will be disabled automatically
Option "OpenGLOverlay" "off"
# === Center Mode (Laptops only) ===
Option "CenterMode" "off"
# === Pseudo Color Visuals (8-bit visuals) ===
Option "PseudoColorVisuals" "off"
# === QBS Management ===
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
# === FSAA Management ===
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
# === Misc Options ===
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "UseInternalAGPGART" "yes"
Option "ForceGenericCPU" "no"
BusID "PCI:1:0:0" # vendor=1002, device=4c66
Screen 0
EndSection

-- ENDS XF86Config-4 FRAGMENT --------------------------------------------------


All times are GMT -5. The time now is 09:21 PM.