LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
Reload this Page Ati Radeon Igp 320m
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices

Reply
 
LinkBack Search this Thread
Old 05-16-2004, 02:32 PM   #1
dkitt10
LQ Newbie
 
Registered: May 2004
Location: canada....eh?
Posts: 24

Rep: Reputation: 15
Ati Radeon Igp 320m

hello, im needing some help bad basically I have a compaq 2100 2190CA which is equipped with a ati radeon IGP 320M 64mb integrated graphics card

problem is I wanna start playing games but my fps is way too low because im using VESA drivers

heres my xf86 config (sorry for any spelling errors im typing this out on diff computer (dont have internet acess on laptop have to fix that also))

Section "Device"
Identifier "VESA Framebuffer"
Driver "vesa"
#VideoRam 4096
#Insert Clocks lines here if appropriate
End Section

a hole wack of commnets saying about the section

Section "Screen"
Identifier "Screen 1"
Device "VESA Framebuffer"
Monitor "My Monitor"
DefaultDepth 24

then it has the modes

glxgears averages 240 FPS minimized and 16 FPS maximized



can some one please help me find the correct drivers...thanks a bunch
 
Old 05-16-2004, 03:45 PM   #2
dkitt10
LQ Newbie
 
Registered: May 2004
Location: canada....eh?
Posts: 24

Original Poster
Rep: Reputation: 15
can some one plese help me cause this is a bit over me

http://rzr.online.fr/docs/comp/gfxcard.htm

this site says how to do it but im not sure how to merge it with my xf86 config

here is mine

http://www.freewebs.com/dkitt10/XF86Config


please please can some one put them together for me I can paypal you 1.89 cause I think thats how much I got left


please please please
 
Old 05-20-2004, 09:32 PM   #3
dkitt10
LQ Newbie
 
Registered: May 2004
Location: canada....eh?
Posts: 24

Original Poster
Rep: Reputation: 15
any one?
 
Old 05-22-2004, 03:37 AM   #4
cucmi
LQ Newbie
 
Registered: May 2004
Location: Shanghai/China
Posts: 28

Rep: Reputation: 15
have u had the driver from ati website installed?
my radeon 9200se works fine in kt400 in agp8x mode (redhat9)
i remmerbered that it support radeon igp, plz have a try ,good luck
 
Old 05-23-2004, 01:51 AM   #5
dkitt10
LQ Newbie
 
Registered: May 2004
Location: canada....eh?
Posts: 24

Original Poster
Rep: Reputation: 15
well when I click moblie under drivers for it it says there are none and to contact my computer manufacter...compaq doesnt have linux drivers


but ill give urs a whirl
 
Old 05-23-2004, 06:30 AM   #6
cucmi
LQ Newbie
 
Registered: May 2004
Location: Shanghai/China
Posts: 28

Rep: Reputation: 15
follow the url http://www.ati.com/support/driver.html
chose linux-> graphic drivers -> and then choose any of the items
i think the video core igp32 integreted is 9100 or 9200
before DL the driver check u xfree version.in my case , i'm using redhat9 ,it use xfree4.3
good lucky
 
Old 05-23-2004, 12:09 PM   #7
dkitt10
LQ Newbie
 
Registered: May 2004
Location: canada....eh?
Posts: 24

Original Poster
Rep: Reputation: 15
well i had got that far but Im gonna wait a bit im using xfree86 4.4 because it give 2d support for my card...which I dont need >< I need 3d support :-/
 
Old 05-23-2004, 04:06 PM   #8
pd983
LQ Newbie
 
Registered: Feb 2004
Location: Filderstadt/Germany
Distribution: SuSE 9.0
Posts: 12

Rep: Reputation: 0
Forget the official ati-drivers, they do not work for IGP-Chips.
The main site to this topic is http://bugs.xfree86.org/show_bug.cgi?id=314
I have written a detailed HowTo how to use the patches for IGP 3D-Support.
I put it under http://groups.yahoo.com/group/amilo
in the Files / Members files section. But you have to register at yahoo to get access to the Files-section, so if i should send you this pdf-file (179kB) send an email to
tho_riedel@web.de

Thomas
 
Old 05-25-2004, 09:31 PM   #9
dkitt10
LQ Newbie
 
Registered: May 2004
Location: canada....eh?
Posts: 24

Original Poster
Rep: Reputation: 15
I found it


no offense but its really ahrd for me to understand what to do but ill try to do it

thx for the source
 
Old 09-26-2004, 10:29 AM   #10
crazytigger
Member
 
Registered: Sep 2004
Location: Brighton UK
Distribution: *buntu 7.10
Posts: 59

Rep: Reputation: 15
hey up.. i have radeon igp 320m in my compaq laptop too... I'd love to have an easy explanation of how to get the 3d accel working as i can't make head nor tail of it either... by the time i work it out no doubt there'll be an RPM for it heh...

Ho well... good luck to us!!

crazytig..
 
Old 09-27-2004, 03:03 AM   #11
DiWi
Member
 
Registered: Jun 2004
Location: Frankfurt/M Germany
Distribution: SuSE 9.3/10.2/10.3
Posts: 64

Rep: Reputation: 15
Try X.org 6.8.1
The ATI Radeon IGP320 is supported with this latest release out of the box with 2D and 3D hardware acceleration. But the driver at all is not so fast than a driver from ATI

Dirk
 
Old 11-07-2004, 08:22 PM   #12
Nitrox
Member
 
Registered: Aug 2004
Location: Detroit.
Distribution: Slack 12.1 - Vector (exp)
Posts: 51

Rep: Reputation: 15
Xorg 6.8.1 did work for my IGP 320m right out of the box...
But get this. I actually get LESS FPS with

Direct Rendering: yes installed.

303 FPS with regular ATI drivers (according to glxgears)
166 with DRI Direct Rendering installed (i.e. 3d accel).
Last edited by Nitrox; 11-07-2004 at 10:46 PM.
 
Old 02-16-2005, 08:46 PM   #13
i_s
Member
 
Registered: Feb 2005
Posts: 61

Rep: Reputation: 15
I have the same problem, 3D doesn´t work for me on my presario 900Z. It has IGP 320M (Mobility U1). I have SUSE 9.2Pro.

I have the card configured with SAX2 as RS100 (4336), but that doesn´t work. Any recommendations on which driver should I pick and how to enable 3D.
Below is a copy of my xorg.conf aka XF86Config


Code:
# /.../
# SaX generated X11 config file
# Created on: 2005-02-16T17:28:27-0800.
#
# Version: 4.8
# Contact: Marcus Schaefer <sax@suse.de>, 2002
#
# Automatically generated by [ISaX] (4.8)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/local"
  FontPath     "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/URW"
  FontPath     "/usr/X11R6/lib/X11/fonts/Speedo"
  FontPath     "/usr/X11R6/lib/X11/fonts/PEX"
  FontPath     "/usr/X11R6/lib/X11/fonts/cyrillic"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin2/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/latin7/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/baekmuk:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/japanese:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/kwintv"
  FontPath     "/usr/X11R6/lib/X11/fonts/truetype"
  FontPath     "/usr/X11R6/lib/X11/fonts/uni:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/CID"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/ucs/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/misc:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/75dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/100dpi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/hellas/Type1"
  FontPath     "/usr/X11R6/lib/X11/fonts/misc/sgi:unscaled"
  FontPath     "/usr/X11R6/lib/X11/fonts/xtest"
  FontPath     "/opt/kde3/share/fonts"
  InputDevices "/dev/ttyS0"
  InputDevices "/dev/ttyS1"
  InputDevices "/dev/ttyS2"
  InputDevices "/dev/ttyS3"
  InputDevices "/dev/ttyS4"
  InputDevices "/dev/ttyS5"
  InputDevices "/dev/ttyS6"
  InputDevices "/dev/ttyS7"
  InputDevices "/dev/ttyS8"
  InputDevices "/dev/psaux"
  InputDevices "/dev/logibm"
  InputDevices "/dev/sunmouse"
  InputDevices "/dev/atibm"
  InputDevices "/dev/amigamouse"
  InputDevices "/dev/atarimouse"
  InputDevices "/dev/inportbm"
  InputDevices "/dev/gpmdata"
  InputDevices "/dev/mouse"
  InputDevices "/dev/usbmouse"
  InputDevices "/dev/adbmouse"
  InputDevices "/dev/input/mice"
  InputDevices "/dev/input/event0"
  InputDevices "/dev/pointer0"
  InputDevices "/dev/pointer1"
  InputDevices "/dev/pointer2"
  InputDevices "/dev/pointer3"
EndSection

Section "ServerFlags"
  Option       "AllowMouseOpenFail"
  Option       "RandR" "on"
EndSection

Section "Module"
  Load         "glx"
  Load         "type1"
  Load         "extmod"
  Load         "dbe"
  Load         "freetype"
  Load         "v4l"
  Load         "dri"
EndSection

Section "InputDevice"
  Driver       "kbd"
  Identifier   "Keyboard[0]"
  Option       "Protocol" "Standard"
  Option       "XkbLayout" "us"
  Option       "XkbModel" "pc104"
  Option       "XkbRules" "xfree86"
EndSection

Section "InputDevice"
  Driver       "synaptics"
  Identifier   "Mouse[1]"
  Option       "Device" "/dev/input/mice"
  Option       "Emulate3Buttons" "on"
  Option       "EmulateWheel" "on"
  Option       "EmulateWheelButton" "4"
  Option       "InputFashion" "Mouse"
  Option       "Name" "Synaptics;Touchpad"
  Option       "SHMConfig" "on"
  Option       "ZAxisMapping" "4 5"
EndSection

Section "InputDevice"
  Driver       "mouse"
  Identifier   "Mouse[3]"
  Option       "Device" "/dev/input/mice"
  Option       "InputFashion" "Mouse"
  Option       "Name" "USB-Mouse;IMPS/2 on USB"
  Option       "Protocol" "imps/2"
  Option       "ZAxisMapping" "4 5"
EndSection

Section "Monitor"
  DisplaySize  300 230
  HorizSync    29-33
  Identifier   "Monitor[0]"
  ModelName    "HANNSTAR HSD150PK12-A"
  Option       "DPMS"
  VendorName   "HSD"
  VertRefresh  43-72
  UseModes     "Modes[0]"
EndSection

Section "Modes"
  Identifier   "Modes[0]"
  Modeline      "640x480" 23.86 640 656 720 800 480 481 484 497
  Modeline      "1400x1050" 108.00 1400 1424 1520 1688 1050
  1052 1054 1066
EndSection

Section "Screen"
  DefaultDepth 24
  SubSection "Display"
    Depth      15
    Modes      "640x480"
  EndSubSection
  SubSection "Display"
    Depth      16
    Modes      "640x480"
  EndSubSection
  SubSection "Display"
    Depth      24
    Modes      "1400x1050" "1280x1024" "1280x960" "1280x800"
    "1280x768" "1152x86
4" "1024x768" "800x600" "768x576" "640x480"
  EndSubSection
  SubSection "Display"
    Depth      32
    Modes      "640x480"
  EndSubSection
  SubSection "Display"
    Depth      8
    Modes      "640x480"
  EndSubSection
  Device       "Device[0]"
  Identifier   "Screen[0]"
  Monitor      "Monitor[0]"
EndSection

Section "Device"
  BoardName    "RS100 4336"
  BusID        "1:5:0"
  Driver       "radeon"
  Identifier   "Device[0]"
  Screen       0
  Option       "Rotate" "off"
  VendorName   "ATI"
EndSection

Section "ServerLayout"
  Identifier   "Layout[all]"
  InputDevice  "Keyboard[0]" "CoreKeyboard"
  InputDevice  "Mouse[1]" "CorePointer"
  InputDevice  "Mouse[3]" "SendCoreEvents"
  Option       "Clone" "off"
  Option       "Xinerama" "off"
  Screen       "Screen[0]"
EndSection

Section "DRI"
    Group      "video"
    Mode       0660
EndSection

Section "Extensions"
EndSection
Last edited by i_s; 02-16-2005 at 08:49 PM.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
ATI Radeon IGP 320m and 3d Acceleration gbrethen Linux - Hardware 11 12-07-2005 07:56 PM
Radeon IGP 320M rcnsd Suse/Novell 8 11-03-2004 08:47 PM
re: Radeon IGP 320m Linux support crazytigger Linux - Newbie 0 09-29-2004 12:14 AM
opengl locks with radeon igp 320m Kman12 Linux - Laptop and Netbook 3 07-14-2004 12:09 PM
ATI IGP 320M acceleration orlenok Linux - Laptop and Netbook 1 09-30-2003 09:10 AM


All times are GMT -5. The time now is 04:39 PM.

Contact Us - Advertising Info - Rules - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
 
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: @linuxquestions
Open Source Consulting | Domain Registration