LinuxQuestions.org - ATI: Fglrx + Slackware 11.0 ... again

Hi,

I downloaded lastest version (8.39.4) of ATI drivers for my graphics card (ATI Radeon Mobility x600). Installation went smoothly, but I still have no direct rendering. When I load "fglrx" module, dmesg says:

Code:

[fglrx:firegl_unlock] *ERROR* Process 2639 using kernel context 0

mtrr: no more MTRRs available

mtrr: no more MTRRs available

mtrr: no more MTRRs available

cat /proc/mtrr says:

Code:

reg00: base=0x00000000 (  0MB), size= 512MB: write-back, count=1

reg01: base=0x1ff00000 ( 511MB), size=  1MB: uncachable, count=1

reg02: base=0xd3fc0000 (3391MB), size= 128KB: write-combining, count=1

reg03: base=0xd3f80000 (3391MB), size= 256KB: write-combining, count=1

reg04: base=0xd3f00000 (3391MB), size= 512KB: write-combining, count=1

reg05: base=0xd3e00000 (3390MB), size=  1MB: write-combining, count=1

reg06: base=0xd3c00000 (3388MB), size=  2MB: write-combining, count=1

reg07: base=0xd3800000 (3384MB), size=  4MB: write-combining, count=1

lspci -v

Code:

01:00.0 VGA compatible controller: ATI Technologies Inc M24 1P [Radeon Mobility X600] (prog-if 00 [VGA])

        Subsystem: Acer Incorporated [ALI] Unknown device 0066

        Flags: bus master, fast devsel, latency 0, IRQ 16

        Memory at d0000000 (32-bit, prefetchable) [size=128M]

        I/O ports at 3000 [size=256]

        Memory at c8100000 (32-bit, non-prefetchable) [size=64K]

        [virtual] Expansion ROM at c8120000 [disabled] [size=128K]

        Capabilities: [50] Power Management version 2

        Capabilities: [58] Express Endpoint IRQ 0

        Capabilities: [80] Message Signalled Interrupts: 64bit+ Queue=0/0 Enable-

        Capabilities: [100] Advanced Error Reporting

Please, tell me how to deal with this problem. I guess I need to set mtrr settings. I use Slackware 11.0 (2.6.20)