ati 3d accel on debian
hello,
i have installed debian etch and i'm having a hard time getting my 3daccel runnin with my ati card i did this: #sh ./ati-driver-installer-8.29.6.run --buildpkg Debian/etch #dpgk -i fglrx-*.deb #module-assistant prepare #module-assistant update #module-assistant a-i fglrx #aticonfig --initial #reboot i got this: a black screen ... actually this is not precise: 'cause if i blind-type the following: root <root_passwd> reboot the system is actually rebooting my guess is: the monitor is not used, something is not set right in my xorg.conf i would appreciate any help, thanx |
here is my xorg.conf:
---------------- Section "ServerLayout" Identifier "Default Layout" Screen 0 "aticonfig-Screen[0]" 0 0 InputDevice "Generic Keyboard" InputDevice "Configured Mouse" EndSection Section "Files" # path to defoma fonts FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/X11R6/lib/X11/fonts/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/X11R6/lib/X11/fonts/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/X11R6/lib/X11/fonts/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/X11R6/lib/X11/fonts/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/X11R6/lib/X11/fonts/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/usr/X11R6/lib/X11/fonts/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" EndSection Section "Module" Load "i2c" Load "bitmap" Load "ddc" Load "dri" Load "extmod" Load "freetype" Load "glx" Load "int10" Load "type1" Load "vbe" EndSection Section "InputDevice" Identifier "Generic Keyboard" Driver "kbd" Option "CoreKeyboard" Option "XkbRules" "xorg" Option "XkbModel" "pc104" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Configured Mouse" Driver "mouse" Option "CorePointer" Option "Device" "/dev/input/mice" Option "Protocol" "ExplorerPS/2" Option "Emulate3Buttons" "true" EndSection Section "Monitor" Identifier "SyncMaster" Option "DPMS" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Device" Identifier "ATI Technologies, Inc. RV280 [Radeon 9200 PRO]" Driver "ati" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]" Driver "fglrx" EndSection Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. RV280 [Radeon 9200 PRO]" Monitor "SyncMaster" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 4 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 8 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 15 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1152x864" "1024x768" "832x624" "800x600" "720x400" "640x480" EndSubSection EndSection Section "Screen" Identifier "aticonfig-Screen[0]" Device "aticonfig-Device[0]" Monitor "aticonfig-Monitor[0]" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "DRI" Mode 0666 EndSection |
Quote:
Go to single user mode, and as root ... modprobe -v fglrx, reboot If that doesn't work, post the output of lsmod. |
i've tried what u told me but it didn.t work (i already tried that befor)
here is what i did (in single urs mod): --->add line u told me --->#modprobe -v fglrx > file --->#reboot the output is: --->file:(stdout) insmod /lib/modules/2.6.17-2-486/misc/fglrx.ko --->screen:(sdterr) [flgrx] maximum main memory to use for locked dma buffers 432 MBytes [fglrx] module loade fglrx 8.29.6 [Sept 19 2006] on mirror 0 (i don't think this is actually an error ... it doesn't sound much licke one) i still get the monitor unpowered ( blackscreen :( ) -------------- one more thing: if i change Driver "fglrx" with Driver "ati" everything is going fine , that is gdm is loading properly with 2d-accel so my seconf guess is: something is rotten with the fglrx-driver (could it be the refresh-rate?) --------------- ps. here is the output u asked me for #lsmod Module Size Used by radeon 98720 1 drm 59924 2 radeon ipv6 211424 10 ppdev 8452 0 lp 10692 0 button 6544 0 ac 4868 0 battery 9220 0 sk98lin 130272 0 dm_snapshot 15772 0 dm_mirror 17616 0 dm_mod 48696 2 dm_snapshot,dm_mirror sbp2 20232 0 loop 13832 0 snd_seq_dummy 3844 0 snd_seq_oss 27392 0 snd_seq_midi 8096 0 snd_seq_midi_event 6656 2 snd_seq_oss,snd_seq_midi snd_seq 42576 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event tsdev 7360 0 mousedev 10400 1 shpchp 33816 0 pci_hotplug 26420 1 shpchp snd_via82xx_modem 13704 0 snd_via82xx 25240 1 gameport 13448 1 snd_via82xx snd_ac97_codec 82336 2 snd_via82xx_modem,snd_via82xx snd_ac97_bus 2304 1 snd_ac97_codec snd_pcm_oss 35616 0 snd_mixer_oss 15616 1 snd_pcm_oss snd_pcm 71432 4 snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_pcm_oss snd_timer 19716 2 snd_seq,snd_pcm snd_mpu401_uart 6912 1 snd_via82xx snd_rawmidi 21792 2 snd_seq_midi,snd_mpu401_uart snd_seq_device 7692 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi snd 45668 14 snd_seq_oss,snd_seq,snd_via82xx_modem,snd_via82xx,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,s nd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device 8250_pnp 8704 0 snd_page_alloc 9480 3 snd_via82xx_modem,snd_via82xx,snd_pcm parport_pc 31524 1 parport 31944 3 ppdev,lp,parport_pc soundcore 8800 1 snd psmouse 34184 0 serio_raw 6276 0 i2c_viapro 8084 0 i2c_core 19216 1 i2c_viapro eth1394 17412 0 evdev 8960 1 amd64_agp 11844 1 agpgart 29232 2 drm,amd64_agp rtc 11444 0 floppy 52868 0 pcspkr 2816 0 reiserfs 210176 1 sd_mod 18448 3 ide_cd 35104 0 cdrom 32288 1 ide_cd generic 4356 0 [permanent] sata_via 8324 2 sata_promise 10756 0 via82cxxx 8324 0 [permanent] ide_core 107940 3 ide_cd,generic,via82cxxx ohci1394 29488 0 ieee1394 84536 3 sbp2,eth1394,ohci1394 libata 60300 2 sata_via,sata_promise scsi_mod 120840 3 sbp2,sd_mod,libata skge 33040 0 uhci_hcd 19464 0 ehci_hcd 26888 0 usbcore 108544 3 uhci_hcd,ehci_hcd thermal 12680 0 processor 21440 1 thermal fan 4484 0 |
Quote:
Here is the beginning to end procedure I use. Maybe it'll give you some ideas. I especially thing you should be using Xorg version 7.1 |
silly me :D i listed the wrong modul-list
here is the list after adding the fglrx with modprobe -v fglrx ------------------- Module Size Used by fglrx 395180 0 sk98lin 130272 0 dm_snapshot 15772 0 dm_mirror 17616 0 dm_mod 48696 2 dm_snapshot,dm_mirror sbp2 20232 0 loop 13832 0 snd_seq_dummy 3844 0 snd_seq_oss 27392 0 snd_seq_midi 8096 0 snd_seq_midi_event 6656 2 snd_seq_oss,snd_seq_midi snd_seq 42576 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event tsdev 7360 0 mousedev 10400 0 shpchp 33816 0 pci_hotplug 26420 1 shpchp snd_via82xx 25240 0 gameport 13448 1 snd_via82xx snd_via82xx_modem 13704 0 snd_ac97_codec 82336 2 snd_via82xx,snd_via82xx_modem snd_ac97_bus 2304 1 snd_ac97_codec snd_pcm_oss 35616 0 snd_mixer_oss 15616 1 snd_pcm_oss snd_pcm 71432 4 snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss snd_timer 19716 2 snd_seq,snd_pcm snd_mpu401_uart 6912 1 snd_via82xx snd_rawmidi 21792 2 snd_seq_midi,snd_mpu401_uart snd_seq_device 7692 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq,snd_rawmidi i2c_viapro 8084 0 i2c_core 19216 1 i2c_viapro snd 45668 12 snd_seq_oss,snd_seq,snd_via82xx,snd_via82xx_modem,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,s nd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device soundcore 8800 1 snd rtc 11444 0 parport_pc 31524 0 parport 31944 1 parport_pc eth1394 17412 0 floppy 52868 0 snd_page_alloc 9480 3 snd_via82xx,snd_via82xx_modem,snd_pcm 8250_pnp 8704 0 amd64_agp 11844 1 agpgart 29232 2 fglrx,amd64_agp psmouse 34184 0 serio_raw 6276 0 evdev 8960 0 pcspkr 2816 0 reiserfs 210176 1 sd_mod 18448 3 ide_cd 35104 0 cdrom 32288 1 ide_cd generic 4356 0 [permanent] sata_via 8324 2 via82cxxx 8324 0 [permanent] ide_core 107940 3 ide_cd,generic,via82cxxx sata_promise 10756 0 ohci1394 29488 0 ieee1394 84536 3 sbp2,eth1394,ohci1394 libata 60300 2 sata_via,sata_promise scsi_mod 120840 3 sbp2,sd_mod,libata skge 33040 0 uhci_hcd 19464 0 ehci_hcd 26888 0 usbcore 108544 3 uhci_hcd,ehci_hcd thermal 12680 0 processor 21440 1 thermal fan 4484 0 |
All times are GMT -5. The time now is 05:42 AM. |