LinuxQuestions.org
Download your favorite Linux distribution at LQ ISO.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware
User Name
Password
Linux - Hardware This forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?

Notices



Reply
 
Search this Thread
Old 11-09-2007, 09:21 AM   #1
gewe
LQ Newbie
 
Registered: May 2007
Location: EU
Distribution: Linux Mint
Posts: 11

Rep: Reputation: 0
Question ATA bus errors


I get a lot of errors like these:
Code:
[   58.580000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
[   58.580000] ata1.00: cmd c8/00:08:33:3b:63/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
[   58.580000]          res 40/00:40:36:5d:bb/00:00:00:00:00/e8 Emask 0x4 (timeout)
[   63.932000] ata1: port is slow to respond, please be patient (Status 0xd0)
[   68.636000] ata1: device not ready (errno=-16), forcing hardreset
[   68.636000] ata1: hard resetting port
Code:
[   69.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   69.436000] ata1.00: (BMDMA stat 0x24)
[   69.436000] ata1.00: cmd ca/00:18:d3:08:97/00:00:00:00:00/e4 tag 0 cdb 0x0 data 12288 out
[   69.436000]          res 51/84:01:ea:08:97/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
[   69.748000] ata1: soft resetting port
It happens at random intervals, sometime when the system has been running for some hours, sometimes during boot. I sometimes have to try more than 4 boots, before I get to the login prompt.
I have been having these problems for about 6 months. I already tried 3 motherboards:
- Asus A8N SLI DeLuxe
- Abit KN9 Ultra
- Asus M2N33 SLI
with 3 processors:
- AMD Athlon64 3200+
- AMD Opteron 165
- AMD Athlon64 X2 3800+
with 4 chipsets:
- nVidia nForce4
- nVidia nForce570
- nVidia nForce590 and SiI3124
with two different harddisks:
- Seagate Barracuda 7200.9 SATA2 300Gb
- Western Digital WD5000AAKS SATA2 500Gb

I am using Ubuntu. The latest upgrade to 7.10 (Gutsy Gibbon) did not solve the problem.
Kernel: 2.6.22-14-generic
There is only one SATA harddisk attached, no RAID. There is one ATAPI DVD-RW drive.


Can anyone tell me what these errors mean, and how I can get rid of them? It is more or less making my system unusable right now.

lspci:
Code:
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1)
00:08.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:09.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:09.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:09.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:0a.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:0a.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:0c.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:0d.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0d.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0d.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:10.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:00.0 VGA compatible controller: nVidia Corporation NV37GL [Quadro FX 330/GeForce PCX 5300] (rev a2)
02:07.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
02:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
dmesg (ata related):
Code:
[    4.100000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    4.100000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[    4.116000] SCSI subsystem initialized
[    4.148000] libata version 2.21 loaded.

[    5.900000] sata_nv 0000:00:0d.0: version 3.4
[    5.900000] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[    5.900000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 19
[    5.900000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[    5.900000] scsi0 : sata_nv
[    5.900000] scsi1 : sata_nv
[    5.900000] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma 0x0001e000 irq 19
[    5.900000] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma 0x0001e008 irq 19
[    5.920000] hda: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33)
[    5.920000] Uniform CD-ROM driver Revision: 3.20
[    6.204000] usb 1-4: device not accepting address 4, error -62
[    6.368000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.380000] ata1.00: ATA-7: WDC WD5000AAKS-00TMA0, 12.01C01, max UDMA/133
[    6.380000] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    6.388000] usb 1-1: USB disconnect, address 2
[    6.388000] usbcore: registered new interface driver hiddev
[    6.396000] ata1.00: configured for UDMA/133
[    6.516000] usb 1-2: USB disconnect, address 3
[    8.008000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[    8.008000] sd 0:0:0:0: [sda] Write Protect is off
[    8.008000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.008000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.008000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[    8.008000] sd 0:0:0:0: [sda] Write Protect is off
[    8.008000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    8.008000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    8.008000]  sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
[    8.076000] sd 0:0:0:0: [sda] Attached SCSI disk
[    8.080000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[   25.260000] Adding 2000052k swap on /dev/sda5.  Priority:-1 extents:1 across:2000052k
[   25.336000] EXT3 FS on sda2, internal journal
[   25.548000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   25.548000] ata1.00: (BMDMA stat 0x24)
[   25.548000] ata1.00: cmd ca/00:08:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out
[   25.548000]          res 51/84:01:46:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[   25.860000] ata1: soft resetting port
[   26.016000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   26.048000] ata1.00: configured for UDMA/133
[   26.048000] ata1: EH complete
[   26.048000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   26.048000] sd 0:0:0:0: [sda] Write Protect is off
[   26.048000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.064000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   26.064000] ata1.00: (BMDMA stat 0x24)
[   26.064000] ata1.00: cmd ca/00:08:3f:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out
[   26.064000]          res 51/84:01:46:00:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[   26.376000] ata1: soft resetting port
[   26.532000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   26.564000] ata1.00: configured for UDMA/133
[   26.564000] ata1: EH complete
[   26.564000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.564000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   26.564000] sd 0:0:0:0: [sda] Write Protect is off
[   26.564000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   26.564000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   26.644000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   26.644000] ata1.00: (BMDMA stat 0x24)
[   26.644000] ata1.00: cmd ca/00:08:57:04:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 out
[   26.644000]          res 51/84:01:5e:04:00/00:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[   26.956000] ata1: soft resetting port
[   27.112000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[   27.140000] ata1.00: configured for UDMA/133
[   27.140000] ata1: EH complete
[   27.140000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   27.140000] sd 0:0:0:0: [sda] Write Protect is off
[   27.140000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   27.140000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   27.340000] ata1: limiting SATA link speed to 1.5 Gbps
[   27.340000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x6
[   27.340000] ata1.00: (BMDMA stat 0x25)
[   27.340000] ata1.00: cmd ca/00:50:26:5d:bb/00:00:00:00:00/e8 tag 0 cdb 0x0 data 40960 out
[   27.340000]          res 51/84:40:36:5d:bb/00:00:00:00:00/e8 Emask 0x10 (ATA bus error)
[   27.340000] ata1: hard resetting port
[   27.972000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   28.008000] ata1.00: configured for UDMA/133
[   28.008000] ata1: EH complete
[   28.008000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   28.008000] sd 0:0:0:0: [sda] Write Protect is off
[   28.008000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   28.008000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   58.580000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x1800000 action 0x2 frozen
[   58.580000] ata1.00: cmd c8/00:08:33:3b:63/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
[   58.580000]          res 40/00:40:36:5d:bb/00:00:00:00:00/e8 Emask 0x4 (timeout)
[   63.932000] ata1: port is slow to respond, please be patient (Status 0xd0)
[   68.636000] ata1: device not ready (errno=-16), forcing hardreset
[   68.636000] ata1: hard resetting port
[   69.268000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   69.300000] ata1.00: configured for UDMA/133
[   69.300000] ata1: EH complete
[   69.304000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   69.308000] sd 0:0:0:0: [sda] Write Protect is off
[   69.308000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   69.308000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   69.436000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   69.436000] ata1.00: (BMDMA stat 0x24)
[   69.436000] ata1.00: cmd ca/00:18:d3:08:97/00:00:00:00:00/e4 tag 0 cdb 0x0 data 12288 out
[   69.436000]          res 51/84:01:ea:08:97/00:00:00:00:00/e4 Emask 0x10 (ATA bus error)
[   69.748000] ata1: soft resetting port
[   69.904000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   69.932000] ata1.00: configured for UDMA/133
[   69.932000] ata1: EH complete
[   70.332000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   70.332000] ata1.00: (BMDMA stat 0x25)
[   70.332000] ata1.00: cmd ca/00:38:e3:08:1f/00:00:00:00:00/e1 tag 0 cdb 0x0 data 28672 out
[   70.332000]          res 51/84:18:03:09:1f/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[   70.644000] ata1: soft resetting port
[   70.800000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   70.832000] ata1.00: configured for UDMA/133
[   70.832000] ata1: EH complete
[   70.856000] ata1.00: limiting speed to UDMA/100:PIO4
[   70.856000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   70.856000] ata1.00: (BMDMA stat 0x25)
[   70.856000] ata1.00: cmd ca/00:80:0b:09:23/00:00:00:00:00/e1 tag 0 cdb 0x0 data 65536 out
[   70.856000]          res 51/84:50:3b:09:23/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[   71.168000] ata1: soft resetting port
[   71.324000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   71.356000] ata1.00: configured for UDMA/100
[   71.356000] ata1: EH complete
[   71.376000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   71.376000] ata1.00: (BMDMA stat 0x24)
[   71.376000] ata1.00: cmd ca/00:08:53:0a:23/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 out
[   71.376000]          res 51/84:01:5a:0a:23/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[   71.688000] ata1: soft resetting port
[   71.844000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   71.876000] ata1.00: configured for UDMA/100
[   71.876000] ata1: EH complete
[   71.876000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   71.900000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   71.900000] ata1.00: (BMDMA stat 0x24)
[   71.900000] ata1.00: cmd ca/00:08:23:36:28/00:00:00:00:00/e1 tag 0 cdb 0x0 data 4096 out
[   71.900000]          res 51/84:01:2a:36:28/00:00:00:00:00/e1 Emask 0x10 (ATA bus error)
[   72.212000] ata1: soft resetting port
[   72.368000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   72.400000] ata1.00: configured for UDMA/100
[   72.400000] ata1: EH complete
[   72.400000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   72.400000] sd 0:0:0:0: [sda] Write Protect is off
[   72.400000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   72.428000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   72.428000] ata1.00: (BMDMA stat 0x25)
[   72.428000] ata1.00: cmd 35/00:10:2f:ab:07/00:01:00:00:00/e0 tag 0 cdb 0x0 data 139264 out
[   72.428000]          res 51/84:f0:4f:ab:07/84:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[   72.740000] ata1: soft resetting port
[   72.896000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   72.932000] ata1.00: configured for UDMA/100
[   72.932000] ata1: EH complete
[   72.932000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   72.932000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   72.932000] sd 0:0:0:0: [sda] Write Protect is off
[   72.932000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   72.936000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   73.024000] ata1.00: limiting speed to UDMA/33:PIO4
[   73.024000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   73.024000] ata1.00: (BMDMA stat 0x25)
[   73.024000] ata1.00: cmd ca/00:68:63:09:97/00:00:00:00:00/e4 tag 0 cdb 0x0 data 53248 out
[   73.024000]          res 51/84:58:73:09:97/84:00:00:00:00/e4 Emask 0x10 (ATA bus error)
[   73.336000] ata1: soft resetting port
[   73.492000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   73.524000] ata1.00: configured for UDMA/33
[   73.524000] ata1: EH complete
[   73.524000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   73.524000] sd 0:0:0:0: [sda] Write Protect is off
[   73.524000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   73.524000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   73.552000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   73.552000] ata1.00: (BMDMA stat 0x25)
[   73.552000] ata1.00: cmd ca/00:20:03:09:a7/00:00:00:00:00/e4 tag 0 cdb 0x0 data 16384 out
[   73.552000]          res 51/84:10:13:09:a7/84:00:00:00:00/e4 Emask 0x10 (ATA bus error)
[   73.872000] ata1: soft resetting port
[   74.028000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   74.056000] ata1.00: configured for UDMA/33
[   74.056000] ata1: EH complete
[   74.136000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   74.148000] ata1.00: (BMDMA stat 0x25)
[   74.156000] ata1.00: cmd ca/00:40:e3:08:c7/00:00:00:00:00/e4 tag 0 cdb 0x0 data 32768 out
[   74.156000]          res 51/84:20:03:09:c7/84:00:00:00:00/e4 Emask 0x10 (ATA bus error)
[   74.476000] ata1: soft resetting port
[   74.632000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   74.668000] ata1.00: configured for UDMA/33
[   74.668000] ata1: EH complete
[   74.668000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   74.688000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   74.700000] ata1.00: (BMDMA stat 0x25)
[   74.708000] ata1.00: cmd ca/00:48:e3:08:d3/00:00:00:00:00/e4 tag 0 cdb 0x0 data 36864 out
[   74.708000]          res 51/84:18:13:09:d3/84:00:00:00:00/e4 Emask 0x10 (ATA bus error)
[   75.028000] ata1: soft resetting port
[   75.184000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   75.216000] ata1.00: configured for UDMA/33
[   75.216000] ata1: EH complete
[   75.216000] sd 0:0:0:0: [sda] Write Protect is off
[   75.216000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   75.216000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   75.216000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   75.216000] sd 0:0:0:0: [sda] Write Protect is off
[   75.216000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   75.216000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   75.248000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   75.256000] ata1.00: (BMDMA stat 0x25)
[   75.264000] ata1.00: cmd ca/00:18:e3:08:df/00:00:00:00:00/e4 tag 0 cdb 0x0 data 12288 out
[   75.264000]          res 51/84:08:f3:08:df/84:00:00:00:00/e4 Emask 0x10 (ATA bus error)
[   75.584000] ata1: soft resetting port
[   75.740000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   75.776000] ata1.00: configured for UDMA/33
[   75.776000] ata1: EH complete
[   75.792000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   75.800000] ata1.00: (BMDMA stat 0x25)
[   75.808000] ata1.00: cmd ca/00:28:d3:09:df/00:00:00:00:00/e4 tag 0 cdb 0x0 data 20480 out
[   75.808000]          res 51/84:08:f3:09:df/84:00:00:00:00/e4 Emask 0x10 (ATA bus error)
[   76.132000] ata1: soft resetting port
[   76.288000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   76.324000] ata1.00: configured for UDMA/33
[   76.324000] ata1: EH complete
[   77.296000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   77.304000] ata1.00: (BMDMA stat 0x24)
[   77.312000] ata1.00: cmd ca/00:10:07:cd:53/00:00:00:00:00/e5 tag 0 cdb 0x0 data 8192 out
[   77.312000]          res 51/84:01:16:cd:53/84:00:00:00:00/e5 Emask 0x10 (ATA bus error)
[   77.636000] ata1: soft resetting port
[   77.792000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   77.824000] ata1.00: configured for UDMA/33
[   77.824000] ata1: EH complete
[   77.824000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   77.824000] sd 0:0:0:0: [sda] Write Protect is off
[   77.824000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   77.824000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   77.900000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   77.908000] ata1.00: (BMDMA stat 0x25)
[   77.920000] ata1.00: cmd ca/00:50:ff:cb:87/00:00:00:00:00/e6 tag 0 cdb 0x0 data 40960 out
[   77.920000]          res 51/84:40:0f:cc:87/84:00:00:00:00/e6 Emask 0x10 (ATA bus error)
[   78.240000] ata1: soft resetting port
[   78.396000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   78.432000] ata1.00: configured for UDMA/33
[   78.432000] ata1: EH complete
[   78.432000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   78.432000] sd 0:0:0:0: [sda] Write Protect is off
[   78.432000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   78.432000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   78.528000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   78.536000] ata1.00: (BMDMA stat 0x24)
[   78.544000] ata1.00: cmd ca/00:08:9f:cb:a7/00:00:00:00:00/e6 tag 0 cdb 0x0 data 4096 out
[   78.544000]          res 51/84:01:a6:cb:a7/84:00:00:00:00/e6 Emask 0x10 (ATA bus error)
[   78.868000] ata1: soft resetting port
[   79.024000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   79.060000] ata1.00: configured for UDMA/33
[   79.060000] ata1: EH complete
[   79.060000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   79.060000] sd 0:0:0:0: [sda] Write Protect is off
[   79.060000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   79.060000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   79.088000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   79.100000] ata1.00: (BMDMA stat 0x25)
[   79.108000] ata1.00: cmd ca/00:28:07:cd:ab/00:00:00:00:00/e6 tag 0 cdb 0x0 data 20480 out
[   79.108000]          res 51/84:09:26:cd:ab/84:00:00:00:00/e6 Emask 0x10 (ATA bus error)
[   79.428000] ata1: soft resetting port
[   79.584000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   79.616000] ata1.00: configured for UDMA/33
[   79.616000] ata1: EH complete
[   79.616000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   79.616000] sd 0:0:0:0: [sda] Write Protect is off
[   79.616000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   79.616000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   79.636000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   79.648000] ata1.00: (BMDMA stat 0x24)
[   79.656000] ata1.00: cmd ca/00:10:57:cb:6f/00:00:00:00:00/e7 tag 0 cdb 0x0 data 8192 out
[   79.656000]          res 51/84:01:66:cb:6f/84:00:00:00:00/e7 Emask 0x10 (ATA bus error)
[   79.980000] ata1: soft resetting port
[   80.136000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   80.176000] ata1.00: configured for UDMA/33
[   80.176000] ata1: EH complete
[   80.176000] sd 0:0:0:0: [sda] 976773168 512-byte hardware sectors (500108 MB)
[   80.176000] sd 0:0:0:0: [sda] Write Protect is off
[   80.176000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[   80.176000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   80.208000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   80.216000] ata1.00: (BMDMA stat 0x24)
[   80.228000] ata1.00: cmd ca/00:20:87:d0:6f/00:00:00:00:00/e7 tag 0 cdb 0x0 data 16384 out
[   80.228000]          res 51/84:01:a6:d0:6f/84:00:00:00:00/e7 Emask 0x10 (ATA bus error)
[   80.548000] ata1: soft resetting port
[   80.704000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   80.740000] ata1.00: configured for UDMA/33
[   80.740000] ata1: EH complete
[   80.784000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   80.792000] ata1.00: (BMDMA stat 0x24)
[   80.804000] ata1.00: cmd ca/00:08:77:d3:73/00:00:00:00:00/e7 tag 0 cdb 0x0 data 4096 out
[   80.804000]          res 51/84:01:7e:d3:73/84:00:00:00:00/e7 Emask 0x10 (ATA bus error)
[   81.124000] ata1: soft resetting port
[   81.280000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   81.316000] ata1.00: configured for UDMA/33
[   81.316000] ata1: EH complete
[   81.352000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   81.360000] ata1.00: (BMDMA stat 0x24)
[   81.372000] ata1.00: cmd ca/00:08:6f:cb:7b/00:00:00:00:00/e7 tag 0 cdb 0x0 data 4096 out
[   81.372000]          res 51/84:01:76:cb:7b/84:00:00:00:00/e7 Emask 0x10 (ATA bus error)
[   81.692000] ata1: soft resetting port
[   81.848000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   81.884000] ata1.00: configured for UDMA/33
[   81.884000] ata1: EH complete
[   81.916000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   81.924000] ata1.00: (BMDMA stat 0x25)
[   81.936000] ata1.00: cmd ca/00:78:87:ac:07/00:00:00:00:00/e0 tag 0 cdb 0x0 data 61440 out
[   81.936000]          res 51/84:68:97:ac:07/84:00:00:00:00/e0 Emask 0x10 (ATA bus error)
[   82.256000] ata1: soft resetting port
[   82.412000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   82.448000] ata1.00: configured for UDMA/33
[   82.448000] ata1: EH complete
[   83.844000] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x400000 action 0x2
[   83.856000] ata1.00: (BMDMA stat 0x24)
[   83.864000] ata1.00: cmd 35/00:48:fe:66:ce/00:00:1b:00:00/e0 tag 0 cdb 0x0 data 36864 out
[   83.864000]          res 51/84:01:45:67:ce/84:00:1b:00:00/e0 Emask 0x10 (ATA bus error)
[   84.188000] ata1: soft resetting port
[   84.344000] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[   84.384000] ata1.00: configured for UDMA/33
[   84.384000] ata1: EH complete
 
  


Reply

Tags
ata, frozen, port, sata, timeout


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Ata bus error problem with raid 5 alex6666 Linux - Hardware 0 11-16-2006 04:04 AM
Disk (SCSI/SATA/ATA) Host Bus Adapter DMA weshutchins Linux - General 2 08-16-2006 11:18 AM
HP Omnibook 6000 Hard drive interface: ATA-100 or ATA-6? shortname Linux - Laptop and Netbook 3 05-11-2005 10:22 PM
Grub "root=" errors, Serial ATA, kernel 2.4.22 lavabomb Linux - Newbie 17 11-22-2003 11:02 PM
help. ATA/SCSI Serial-ATA error: "ATA: Abnormal Status" xin Linux - Hardware 10 09-05-2003 11:59 PM


All times are GMT -5. The time now is 06:55 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration