Anyone using an Adaptec AIC-9410W SAS/SATA Controller
 

I have a Supermicro 7045A with AIC-9410W SAS/SATA Controller, using CentOS or Fedora, the aic94xxx-seq.fw firmware file copied to /lib/firmware works fine, in LMDE or Ubuntu its not Required, and now my problem is Archlinux and Manjaro, both will give an error loading the same file, and searching internet I can not find a new version. I asked this question on their forum with no help so far, and other threads I did find and old with broken links and no help.

Error:
Oct 30 22:08:46 sm2 kernel: aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
Oct 30 22:08:46 sm2 kernel: uhci_hcd: USB Universal Host Controller Interface driver
Oct 30 22:08:46 sm2 kernel: aic94xx: found Adaptec AIC-9410W SAS/SATA Host Adapter, device 0000:07:02.0
Oct 30 22:08:46 sm2 kernel: scsi0 : aic94xx
...
Oct 30 22:08:46 sm2 kernel: aic94xx: Failed to load sequencer firmware file aic94xx-seq.fw, error -2
Oct 30 22:08:46 sm2 kernel: aic94xx: couldn't init seqs for 0000:07:02.0
Oct 30 22:08:46 sm2 kernel: aic94xx: couldn't init the chip
Oct 30 22:08:46 sm2 kernel: aic94xx: probe of 0000:07:02.0 failed with error -2