Hello everyone.
I'm following the instructions from ALSA's page on my card (CMI8738) to the letter. Here is a link.
http://www.alsa-project.org/alsa-doc...&module=cmipci
I've configured and made my drivers, libraries, and utilities using the latest packages (1.0.3) and I'm now at the step where I have to insert the modules into the kernel. I guess the command is:
[root@localhost sbin]# ./modprobe snd-cmipci
but everytime I try that, I get this:
/lib/modules/2.4.20-30.9/kernel/sound/pci/snd-cmipci.o: init_module: No such device
Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
/lib/modules/2.4.20-30.9/kernel/sound/pci/snd-cmipci.o: insmod /lib/modules/2.4.20-30.9/kernel/sound/pci/snd-cmipci.o failed
/lib/modules/2.4.20-30.9/kernel/sound/pci/snd-cmipci.o: insmod snd-cmipci failed
Can anyone clue me in to what I'm doing wrong? Thanks in advance!
PS: Here is the output from lspci, if that helps at all.
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:0d.0 Unknown mass storage controller: Promise Technology, Inc. 20265 (rev 02)
00:0e.0 Multimedia audio controller: C-Media Electronics Inc CM8738 (rev 10)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586/B/686A/B PIPC Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. USB (rev 1b)
00:11.3 USB Controller: VIA Technologies, Inc. USB (rev 1b)
00:11.4 USB Controller: VIA Technologies, Inc. USB (rev 1b)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 70)
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R200 QL [Radeon 8500 LE]