Linux - HardwareThis forum is for Hardware issues.
Having trouble installing a piece of hardware? Want to know if that peripheral is compatible with Linux?
Notices
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
Having a problem logging in? Please visit this page to clear all LQ-related cookies.
Get a virtual cloud desktop with the Linux distro that you want in less than five minutes with Shells! With over 10 pre-installed distros to choose from, the worry-free installation life is here! Whether you are a digital nomad or just looking for flexibility, Shells can put your Linux machine on the device that you want to use.
Exclusive for LQ members, get up to 45% off per month. Click here for more info.
My newly installed FC4-64 is only allowing 800x600 and 640x480 resolutions. My monitor is HannsG HW191D 19" widescreen and should use 1440x900, however I am unable to find any Linux drivers for my SiS 660/760 onboard graphics.
Can anyone help me find a way round this please?
My xorg.conf file:
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
When done exit out of the GUI session and restart X, at the GUI log on screen press the three key combo of Ctrl+Alt+ F1, log on as root and type;
init 3
(you may have to press the 'Enter' key after the last green [OK] is displayed)
init 5
Press the three key combo of Ctrl+Alt+F1 to go back and log out as root, press the three key combo of Ctrl+Alt+F7 to get back to the GUI log on screen. Remember you might have to press the 'Enter' ket just like when you used the 'init 3' command in order to logout (type 'logout' or 'exit' minus the single quote marks here).
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "gb"
EndSection
but I'm still not getting other screen resolution options.
I got lost with your instructions (don't know how to restart X) so I rebooted the computer. No change in resolution.
I had the same problem (different monitor but can't get 1440x900 out of sis). you will have to add a "modeline" line in the montior section for 1440x900 with appropriate timing information for your monitor. if you google:
+xorg.conf +modeline +HW191D
you will probably find references to such lines.. just double check that they are valid before putting them in as you don't want to be overdriving your monitor due to someones bad parameters.
Distribution: RHEL/CentOS/SL 5 i386 and x86_64 pata for IDE in use
Posts: 4,790
Rep:
Here's a copy of an /etc/X11/xorg.conf file that I use, I added the 1440x900 resolutions to it;
Code:
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1440x900"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 110.0
VertRefresh 50.0 - 90.0
Option "dpms"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "sis"
VendorName "Videocard vendor"
BoardName "Silicon Integrated Systems [SiS] 661/741/760/761 PCI/AGP VGA Display Adapter"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1440x900" "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1440x900" "1280x800" "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
In addition I set the Monitor section to support a wider range for the HorizSync and VertRefresh rates, hopefully this will get the resolution issue resolved.
Switching between the runlevels (the init 3 and init 5 commands) stops and starts the X server. With Linux one has six virtual 'text mode' consoles ( init 3 or the Ctrl+Alt+F1 to F6 key combos) and at least one graphic session (init 5 or the Ctrl+Alt+F7 key combo);
I still cannot get 1440x900 but I now have 1024x768 which is OK, but I am getting an 'Input device out of range' message on the boot screens which goes away after I log on.
I probably won't get 1440x900 because I've noticed I can't get it on my XP partition either (with the latest drivers from SiS).
Distribution: Distribution: RHEL 5 with Pieces of this and that.
Kernel 2.6.23.1, KDE 3.5.8 and KDE 4.0 beta, Plu
Posts: 5,700
Rep:
The resolution you are attempting may not be possible with that sis chipset. Check out this link on details of the sis module and its limits. http://www.die.net/doc/linux/man/man4/sis.4.html
Only thought is with a modeline setting in xorg.conf may do it.
Distribution: RHEL/CentOS/SL 5 i386 and x86_64 pata for IDE in use
Posts: 4,790
Rep:
You should also check the monitors manual, it should tell you the native resolution settings. The have a look at your video memory (if shared in the BIOS) it should be at 32-MB or better (I have mine set at 64-MB for 1280x800 24-bit color).
The /var/log/Xorg.0.log file may provide clues also.
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.