Which ISPs support Linux?
 

I really want to rid myself of Windows and just use Linux, but it seems many of the ISPs I've contacted don't support it. Does anyone know of a national ISP that does? Thanks.

By support you mean technical support?

If you mean, can you use it with linux, most any ISP can be used with linux (Someone out there even made a program to connect to AOL...hehehe, who wants AOL anyway?). It's not linux, it's the protocol they use.

My ISP is AOL. Why do these ISPs say they don't support Linux? Doesn't their dialer software have to be written for Linux?

Take a look at the ISO/OSI layers description at http://www.wilsonmar.com/1isotp.htm to understand better what's going on when your computer is connecting to the Internet.

Which ISPs support Linux?
 

Hello Everyone,

I have discovered an ISP that supports all linux platform formats. Providing you can get you modem hardware working in which ever linux platform you are using.

ispwest is the one I have been using for over six months.

You have to call them on the telephone first but after that is was easy to set up and get connected. They have nation wide local telephone access numbers for almost every state in the USA.

ISPWest, North Hills, CA USA
P.O. Box 2160 North Hills, CA 91393-2160
Phone: (866) 477-9378 or (818) 891-5941

For dial-up, I use Copper.net. $9.95/month and Linux support up front. They won't give tech support for it, though. Have to use LQ for that

This may not be what you wanted to hear, but:

First--drop AOL (More generally, don't use an ISP that gives you anything but a connection. The front end stuff can ALL be done in other ways)
Second--If you get serious about Linux, you will be wanting a high-speed connection (lots of stuff to download, etc.). Depending on where you live, these are getting pretty cheap--ie in the range of 30-40 $/mo
With any high-speed connection I have ever used, Linux has never been an issue. Not sure why it would be on dialup either....

just because they say they dont support doesnt mean it wont work. when i had my cable installed they swore up and down that linux wouldnt work and complained that i am supposed to use an install disk. long stoy short 3 minutes later my wife was playing pogo.

If you use a broadband router, it doesn't matter what's connected behind it.

Most ISP's say they don't support routers either and they violate their Terms of Service..

Fact is if you can dial in and establish a ppp connection you should be good to go, or if it's broadband, as long as you can aquire an IP addrsss. It's most entertaining watching the Tech from the Cable company try and configure your linux machine for net access... Mine just threw up his hands and walked out.. a quick call to the tech support, I gave them the MAC address and serial number from the cable modem and I was online just like magic..

For the most part ISPs automated setup software runs only on windows and their technicians are trained only on supporting windows and possibly mac. While in-house a lot of their backend systems may be running Linux..

I have never known an ISP, perhaps other than AO-HelL :rolleyes: that cared one whit about "a router."

As far as I would be concerned ... their job is to get the cable modem working (which is their unit, rented from them, so that if it quits working they'll actually show up). What's "downstream" from that is of no concern to them, and I don't rely upon them for any sort of "technical support" because, likely as not, the people answering the phones don't know anything anyway.

Once you've got a dial-tone, so to speak, their work (and your expectations) are done.

I know Earthlink does for dial-up.
 

I asked them this specifically several years back (before I ordered DSL from them) and their tech support sent me the directions to dial-in.
As for Broadband, pretty much anyone does, but they might have a check list for the installer who comes to your house to follow (so that he can get to a certain screen - say Google for example) that allows them to be reasonably certain a minimally skilled guy can follow it (which assumes everyone has a Windows PC.) So their install check list might go something like:
a) Run cable line to house.
b) Add splitter.
c) Plug wires and power into cable modem.
d) Connect PC's NIC to cable modem.
e) Insert our CD into drive of user's PC.
f) After install completes, open browser and go to Google
g) Have user sign paper saying install is complete and collect installation fee!
This is pretty typical and it assumes Windows with autorun and a user with full admin priviledges. Unfortunetly, this is pretty much the way the vast majority of home users are setup.
As for AOL, I asked them about a Linux client and it didn't sound like they had a solution at the time I asked (at least 2 years ago.)

Growlor

BUMP

Since this has been two years, I want to know if there is any update on the situation.

I want to know if there is any cable (preferably) or DSL connection ISPs that support Linux or do I have to dual boot windows for now?

Right now I have to have windows dualbooted with a linux version because the cable company may only support windows (Or so I think) Is this still true?

When is linux going to be supported by a major(not dial-up) ISP? Which version would be it?

I'm accessing the net with freespire 2.0.8 at the moment but if something goes wrong I have to access the windows side because the cable company said it didn't support the operating system at least this was the case a year ago.

Just want to know because I wish I could use just linux but for now am forced to use windows also.

My ISP does not support Linux and I'm using Ubuntu for the last 1.5 years or so to access the internet. No (local) issues at all; only occasionally issues at the ISP side, but then everybody suffers.

I specifically decided to get a modem that uses ethernet instead of USB for connection to the PC as I knew that I would be running Linux and did not want to have problems with USB drivers.

What is special about your modem that it requires windows in case of problems? My modem does not need any configuration, so I can not figure that one out.

It's not the modem, I'm using linux now to access as I said before. It's just when something was wwrong with the modem I had and when I went to firefox and opened it up there was a message from the cable company saying that this was an unsupported system and I had to go to the windows side to fix the problem, but once it was fixed I could use the linux side again.

Using Freespire 2.0.8 which is based off of Ubuntu with kde not sure which version.

Your modem was working as you did get the message from the cable provider. So what was the problem?

Question remains what is so special about the modem that it can only be fixed in Windows and not in Linux? What did you have to do?