LinuxQuestions.org
Visit Jeremy's Blog.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - General
User Name
Password
Linux - General This Linux forum is for general Linux questions and discussion.
If it is Linux Related and doesn't seem to fit in any other forum then this is the place.

Notices

Reply
 
Search this Thread
Old 09-29-2003, 12:00 AM   #1
TheRealDeal
Member
 
Registered: Jun 2003
Location: Central Coast, NSW, Australia
Distribution: Gentoo
Posts: 438

Rep: Reputation: 30
SAMBA and Domains?


Hello.

I have a RH9 server setup as a basic file server using Samba. I have a funny problem where people that are logged on to my companies domain, can't connect.

If they hit the server they get the prompt to enter user/password, but each time they enter the correct details it tells them it is incorrect.

People that aren't logged onto the domain can connect no probs at all.

Am I missing something?

Samba is set up to use USER authentication.

Thanks
Craig
 
Old 09-29-2003, 01:57 AM   #2
dtournas
Member
 
Registered: Aug 2003
Location: Charlotte, North Carolina
Distribution: Red Hat (and look-alike), SUSE (when drunk), Slackware (when mad)
Posts: 148

Rep: Reputation: 15
Please, post your /etc/samba/smb.conf file!
 
Old 10-02-2003, 06:00 PM   #3
TheRealDeal
Member
 
Registered: Jun 2003
Location: Central Coast, NSW, Australia
Distribution: Gentoo
Posts: 438

Original Poster
Rep: Reputation: 30
Hello.

Sorry for the long delay in getting back to you. I was away for a while. Sorry about that. Here is my smb.conf file.

#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name
workgroup = support

# server string is the equivalent of the NT Description field
server string = bigred

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
hosts allow = 10.113.

# if you want to automatically load your printer list rather
# than setting them up individually then you'll need this
printcap name = /etc/printcap
load printers = yes

# It should not be necessary to spell out the print system type unless
# yours is non-standard. Currently supported print systems include:
# bsd, sysv, plp, lprng, aix, hpux, qnx, cups
printing = cups

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
; guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
log file = /var/log/samba/%m.log

# Put a capping on the size of the log files (in Kb).
max log size = 0

# Security mode. Most people will want user level security. See
# security_level.txt for details.

# Use password server option only with security = server
# The argument list may include:
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
# password server = *
; password server = <NT-Server-Name>

# Password Level allows matching of _n_ characters of the password for
# all combinations of upper and lower case.
; password level = 8
; username level = 8

# You may wish to use password encryption. Please read
# ENCRYPTION.txt, Win95.txt and WinNT.txt in the Samba documentation.
# Do not enable this option unless you have read those documents
encrypt passwords = yes
smb passwd file = /etc/samba/smbpasswd
# The following is needed to keep smbclient from spouting spurious errors
# when Samba is built with support for SSL.
; ssl CA certFile = /usr/share/ssl/certs/ca-bundle.crt

# The following are needed to allow password changing from Windows to
# update the Linux system password also.
# NOTE: Use these with 'encrypt passwords' and 'smb passwd file' above.
# NOTE2: You do NOT need these to allow workstations to change only
# the encrypted SMB passwords. They allow the Unix password
# to be kept in sync with the SMB password.
unix password sync = Yes
passwd program = /usr/bin/passwd %u
passwd chat = *New*password* %n\n *Retype*new*password* %n\n *passwd:*all*authentication*tokens*updated*successfully*

# You can use PAM's password change control flag for Samba. If
# enabled, then PAM will be used for password changes when requested
# by an SMB client instead of the program listed in passwd program.
# It should be possible to enable this without changing your passwd
# chat parameter for most setups.

pam password change = yes

# Unix users can map to different SMB User names
; username map = /etc/samba/smbusers

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
; include = /etc/samba/smb.conf.%m

# This parameter will control whether or not Samba should obey PAM's
# account and session management directives. The default behavior is
# to use PAM for clear text authentication only and to ignore any
# account or session management. Note that Samba always ignores PAM
# for authentication in the case of encrypt passwords = yes

obey pam restrictions = yes

# Most people will find that this option gives better performance.
# See speed.txt and the manual pages for details
socket options = TCP_NODELAY SO_RCVBUF=8192 SO_SNDBUF=8192

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
; interfaces = 192.168.12.2/24 192.168.13.2/24

# Configure remote browse list synchronisation here
# request announcement to, or browse list sync from:
# a specific host or from / to a whole subnet (see below)
; remote browse sync = 192.168.3.25 192.168.5.255
# Cause this host to announce itself to local subnets here
; remote announce = 192.168.1.255 192.168.2.44
# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
; local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
; os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
; domain master = yes

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
; preferred master = yes

# Enable this if you want Samba to be a domain logon server for
# Windows95 workstations.
; domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
; logon script = %m.bat
# run a specific logon batch file per username
; logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
# %L substitutes for this servers netbios name, %U is username
# You must uncomment the [Profiles] share below
; logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
; wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
; wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one WINS Server on the network. The default is NO.
; wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The built-in default for versions 1.9.17 is yes,
# this has been changed in version 1.9.18 to no.
username map = /etc/samba/smbusers
dns proxy = no

# Case Preservation can be handy - system default is _no_
# NOTE: These can be set on a per share basis
; preserve case = no
; short preserve case = no
# Default case is normally upper case for all DOS files
; default case = lower
# Be very careful with case sensitivity - it can break things!
; case sensitive = no

#============================ Share Definitions ==============================
#[homes]
# comment = Home Directories
# browseable = no
# writeable = yes
# valid users = %S
# create mode = 0664
# directory mode = 0775
# If you want users samba doesn't recognize to be mapped to a guest user
; map to guest = bad user
# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
; comment = Network Logon Service
; path = /usr/local/samba/lib/netlogon
; guest ok = yes
; writable = no
; share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
; path = /usr/local/samba/profiles
; browseable = no
; guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to
# specifically define each individual printer
#[printers]
# comment = All Printers
# path = /var/spool/samba
# browseable = no
# Set public = yes to allow user 'guest account' to print
# printable = yes

# This one is useful for people to share files
;[tmp]
; comment = Temporary file space
; path = /tmp
; read only = no
; public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
; comment = Public Stuff
; path = /home/samba
; public = yes
; writable = yes
; printable = no
; write list = @staff

# Other examples.
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
; comment = Fred's Printer
; valid users = fred
; path = /home/fred
; printer = freds_printer
; public = no
; writable = no
; printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
; comment = Fred's Service
; path = /usr/somewhere/private
; valid users = fred
; public = no
; writable = yes
; printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
; comment = PC Directories
; path = /usr/local/pc/%m
; public = no
; writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
; path = /usr/somewhere/else/public
; public = yes
; only guest = yes
; writable = yes
; printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
; comment = Mary's and Fred's stuff
; path = /usr/somewhere/shared
; valid users = mary fred
; public = no
; writable = yes
; printable = no
; create mask = 0765

[mp]
comment = mp
path = /bigred/mp
writeable = yes
admin users = craigh justinm
[upload]
comment = upload
writeable = yes
path = /bigred/upload
admin users = craigh justinm




Thanks alot for your help. I really appreciate it.

Regards
Craig
 
Old 10-03-2003, 06:04 AM   #4
dtournas
Member
 
Registered: Aug 2003
Location: Charlotte, North Carolina
Distribution: Red Hat (and look-alike), SUSE (when drunk), Slackware (when mad)
Posts: 148

Rep: Reputation: 15
First off all, you should remove the most of the quotes (#). They may be helpful but they are getting really annoying trying to understand what is going on...

So, I took the liberty to post a smb.conf file that is applicable for a PDC set on Samba...

[global]
netbios name = computername
workgroup = branch2.south.company.com
wins support = yes
domain master = yes
local master = yes
preferred master = yes
os level = 255
security = user
encrypt passwords = yes
domain logons = yes
logon path = \\%L\profiles\%u\%m
domain admin group = root craigh justinm
add user script = /usr/sbin/useradd -d /dev/null -g 100 -s /bin/false -M %u

[profiles]
path = /bigred/profiles
writable = yes
create mask = 0600
directory mask = 0700
browsable = no

[mp]
comment = mp
path = /bigred/mp
writeable = yes
valid users = craigh justinm
write list = craigh justinm
admin users = craigh justinm

[upload]
comment = upload
writeable = yes
path = /bigred/upload
valid users = craigh justinm
write list = craigh justinm
admin users = craigh justinm

After that you should useradd -g GROUPNAME craigh etc and then you should smbpasswd -a craigh

This enables the user craigh to Unix and adds a user craigh to Samba. When the PCs that are trying to connect to the PDC are asking for a username to connect, try root's username and password.

If any error message appears, inform me. I hope it'll be sth that I can help you with!
 
Old 10-14-2003, 06:36 AM   #5
vvandam
Member
 
Registered: Jul 2003
Location: South Africa
Distribution: RedHat 9
Posts: 34

Rep: Reputation: 15
Here is something that might help as well....

If you are connecting to a NT domain, add the lines:

security = SERVER
password server = Your_NT_PDC_Name



This will use the NT domain to authenticate your users onto Linux.
Just remember that the Linux username, Samba username and NT usernames need to be the same.

Hope this helps.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
2 domains on the same network with samba ddaas Linux - Networking 2 01-06-2005 02:13 AM
two domains one samba server sparc Linux - Networking 1 08-28-2004 12:00 PM
Can I use a single Samba server for multiple domains? help321 Linux - Software 0 08-11-2004 05:20 AM
Multiple domains under samba bruceg Linux - Networking 1 11-12-2003 01:16 PM
Samba & Domains lexsco Linux - Networking 0 10-07-2003 03:35 PM


All times are GMT -5. The time now is 05:10 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration