LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - General
User Name
Password
Linux - General This Linux forum is for general Linux questions and discussion.
If it is Linux Related and doesn't seem to fit in any other forum then this is the place.

Notices


Reply
  Search this Thread
Old 02-24-2002, 09:35 PM   #1
jonfa
Member
 
Registered: Mar 2001
Location: FL
Posts: 257

Rep: Reputation: 30
optimal PIII temperature range


Hi all,

I checked my cpu temp in the bios and it said 98 degrees F after some heavy usage. I was wondering what the optimal temperature range is for P3's (1 Ghz). Thanks

Jon
 
Old 02-25-2002, 11:32 AM   #2
neo77777
LQ Addict
 
Registered: Dec 2001
Location: Brooklyn, NY
Distribution: *NIX
Posts: 3,704

Rep: Reputation: 56
You might want to dig deeper into http://www.intel.com for such info, as for me I am running AMD processor at 850MHz and the temperture doesn't exceed 50 F, under any load, I use a lot of GIMP edititng which is hungry on processor resources, and the cooling system includes a stock fan for AMD Athlon (socket A), a case fan, a fan on the chipset (ABIT KT7-RAID mobo), a fan on graphics card (ELSA ERAZOR X GeForsce256).
 
Old 02-25-2002, 12:35 PM   #3
jonfa
Member
 
Registered: Mar 2001
Location: FL
Posts: 257

Original Poster
Rep: Reputation: 30
50 F? or 50 C?
I tried searching the intel site, but it's a mess! I was sort of surveying to see what other people were at.
Thanks for the reply.

Jon
 
Old 02-25-2002, 02:06 PM   #4
rshaw
Senior Member
 
Registered: Apr 2001
Location: Perry, Iowa
Distribution: Mepis , Debian
Posts: 2,692

Rep: Reputation: 45
i would think 50C, my 1.2 athlon averages 140F
 
Old 02-25-2002, 02:17 PM   #5
progster
Member
 
Registered: Feb 2002
Distribution: ubuntu
Posts: 76

Rep: Reputation: 15
My athlon 1Ghz is about 64°C after heavy usage , think I should spend a bit of money on better cooling...

Progster
 
Old 02-25-2002, 02:42 PM   #6
rshaw
Senior Member
 
Registered: Apr 2001
Location: Perry, Iowa
Distribution: Mepis , Debian
Posts: 2,692

Rep: Reputation: 45
i'm beginning to wonder that myself. i'm going to leave the side off the case for a couple of days and see if it's the heatsink/fan on the cpu or bad air circulation in the box.
 
Old 02-25-2002, 04:18 PM   #7
neo77777
LQ Addict
 
Registered: Dec 2001
Location: Brooklyn, NY
Distribution: *NIX
Posts: 3,704

Rep: Reputation: 56
My bad, it is 50 C, you know I live in USA the temp is here in F, just concider it a typo.
 
Old 02-25-2002, 04:22 PM   #8
therion12
Member
 
Registered: Dec 2001
Location: chicago, IL
Distribution: Gentoo 1.4_rc1
Posts: 913

Rep: Reputation: 30
Quote:
My athlon 1Ghz is about 64°C after heavy usage , think I should spend a bit of money on better cooling...
Thats not a healthy temp dude. My motherboard starts beeping when it goes past 50C and it shuts down at 60C even though it has never gotten that hot.

I ordered a Alpha 8045 with a 80MM Sunon 39CFM fan to replace my current MCX370-0A (Pabst 60MM, kinda loud). I hope my temps drop. Right now they are like 38C and 45+ C under load. But if i want to overclock this thing i need a alpha...hoping to hit 1.61Ghz stable.

About intel CPU's...especially the P !!!'s. Those temps shouldn't exceed 40C at all. After all they aren't made to withstand alot like amds.
 
Old 02-26-2002, 05:49 AM   #9
Bert
Senior Member
 
Registered: Jul 2001
Location: 406292E 290755N
Distribution: GNU/Linux Slackware 8.1, Redhat 8.0, LFS 4.0
Posts: 1,004

Rep: Reputation: 46
It's not exactly on topic, and I've mentioned it before in this forum, but if you're gonna talk about AMDs and fans, you have to have a look at this .

Bert
 
Old 02-26-2002, 08:01 AM   #10
therion12
Member
 
Registered: Dec 2001
Location: chicago, IL
Distribution: Gentoo 1.4_rc1
Posts: 913

Rep: Reputation: 30
I'm not talking about AMD and fans, i'm simply giving an example to back up/clarify my point.
 
Old 02-26-2002, 08:02 AM   #11
SlCKB0Y
Member
 
Registered: Oct 2001
Location: Sydney
Distribution: Arch
Posts: 295

Rep: Reputation: 96
Quote:
Originally posted by therion12


Thats not a healthy temp dude. My motherboard starts beeping when it goes past 50C and it shuts down at 60C even though it has never gotten that hot.

I ordered a Alpha 8045 with a 80MM Sunon 39CFM fan to replace my current MCX370-0A (Pabst 60MM, kinda loud). I hope my temps drop. Right now they are like 38C and 45+ C under load. But if i want to overclock this thing i need a alpha...hoping to hit 1.61Ghz stable.

About intel CPU's...especially the P !!!'s. Those temps shouldn't exceed 40C at all. After all they aren't made to withstand alot like amds.
You truly are an idiot. i havent overclocked my pIII 1ghz proc and it often gets over 40C. i think youll find that AMD procs are notrious for burning up, much more so than intel procs. AMD run a lot hotter, with a lot less room for error in overclocking.

What else do you think happens in places like Australia where AIR temperatures frequently get above 40C????? it makes the procs run hotter.
DUH?????
 
Old 02-26-2002, 08:10 AM   #12
therion12
Member
 
Registered: Dec 2001
Location: chicago, IL
Distribution: Gentoo 1.4_rc1
Posts: 913

Rep: Reputation: 30
Quote:
You truly are an idiot. i havent overclocked my pIII 1ghz proc and it often gets over 40C. i think youll find that AMD procs are notrious for burning up, much more so than intel procs. AMD run a lot hotter, with a lot less room for error in overclocking.

What else do you think happens in places like Australia where AIR temperatures frequently get above 40C????? it makes the procs run hotter.
DUH?????
Well that means either you dont have good contact between the core and the heatsink base, or your HSF unit itself is too weak. My P3 733Mhz overclocked to 820Mhz never runs past 35C and this isn't some expensive cooling but rather a cheap GlobalWin FOP32~1.

damnit i have to go.
 
Old 02-26-2002, 08:18 AM   #13
SlCKB0Y
Member
 
Registered: Oct 2001
Location: Sydney
Distribution: Arch
Posts: 295

Rep: Reputation: 96
Quote:
Originally posted by therion12


Well that means either you dont have good contact between the core and the heatsink base, or your HSF unit itself is too weak. My P3 733Mhz overclocked to 820Mhz never runs past 35C and this isn't some expensive cooling but rather a cheap GlobalWin FOP32~1.

damnit i have to go.
\umm im using the stock heat sink.

the contact is fine
do you ever think that maybe you using a non standard heaksink/fan plus 3rd party goo might be LOWERING YOUR temperature below normal intel specs??

jesus, its like xplaining something to a monkey.

My computer idles around 31C even on warm days, if i play Q3A for a while it gets up to 41/2C
 
Old 02-26-2002, 12:15 PM   #14
therion12
Member
 
Registered: Dec 2001
Location: chicago, IL
Distribution: Gentoo 1.4_rc1
Posts: 913

Rep: Reputation: 30
Quote:
\umm im using the stock heat sink.

the contact is fine
do you ever think that maybe you using a non standard heaksink/fan plus 3rd party goo might be LOWERING YOUR temperature below normal intel specs??

jesus, its like xplaining something to a monkey.

My computer idles around 31C even on warm days, if i play Q3A for a while it gets up to 41/2C
Alright as i was saying (damn high school). mm yeah the temps are good then. Anything over 50C will reduce your processors lifespan. Higher cpu temps speed up the process of electromigration or something where the edges of the microscopic walls of the processor core wear off eventually. This process occurs naturally in programs aging but overclocking will speed this up becuase basically you are trying to push more speed and/or electricity (if you Vmod) through the same size valleys as before. Of course a normal non overclocked, well cooled, taken care of processor can last you for over 5 years. Most of us don't upgrade our computers every year or so anyways. Your comment about AMD processors burning up...

Yes, AMD processors do run much warmer than Intels and yes i own both so i am not bias. I also know that if you run a AMD processor without a heatsink for more than 2-3 seconds it will basically FRY. Intel cpus have protection on them which locks the computer when temps exceed a certain amount. AMD cpus uptil the Thunderbird didnt have this protection so stupid newbies who forget to plug in the fan plug on the motherboard will have to pay the ultimate price of a fried motherboard. Athlon XP/MP family do have this protection feature so it will power off in a matter of seconds after the temp goes past 70C or so.
 
  


Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
optimal file output? zero79 Programming 1 08-30-2005 08:50 PM
Optimal settings for RAID0 unzari Fedora 3 07-21-2005 05:17 PM
How can I tell if my pc is actually using the two PIII 550 CPUs? ExCIA Linux - Hardware 6 04-25-2005 02:07 PM
Optimal Hardware... Likosin Linux - Hardware 3 09-01-2003 02:53 PM
optimal networking config... dunkyb Linux - Networking 0 02-14-2003 04:45 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - General

All times are GMT -5. The time now is 10:26 PM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration