Hi,
Yesterday I attempted to start my linux system, and it won't boot. It might be that I added an additonal HD to my system a week ago, and this might have been the first time that I have rebooted since then. I was careful when I installed the new drive, but maybe I made a mistake editing the fstab.
Here's the error that I get when booting:
Couldn't find matching filesystem:
LABEL=/main
***An error occured during the file system check
So, I tried to use my RH9 rescue cds to recover the system, and get this error when I choose "Upgrade existing system" (edited because of length).
From anacdump.txt:
Traceback (most recent call last):
File "/usr/lib/anaconda/gui.py", line 761, in nextClicked
self.dispatch.gotoNext()
File "/usr/lib/anaconda/dispatch.py", line 157, in gotoNext
self.moveStep()
File "/usr/lib/anaconda/dispatch.py", line 225, in moveStep
rc = apply(func, self.bindArgs(args))
File "/usr/lib/anaconda/upgrade.py", line 249, in upgradeMountFilesystems
allowDirty = 0)
File "/usr/lib/anaconda/upgrade.py", line 131, in mountRootPartition
oldfsset.mountFilesystems(instPath, readOnly = readOnly)
File "/usr/lib/anaconda/fsset.py", line 1260, in mountFilesystems
if isinstance(root.device, LogicalVolumeDevice):
AttributeError: 'NoneType' object has no attribute 'device'
Local variables in innermost frame:
readOnly: 0
instPath: /mnt/sysimage
entry: fsentry -- device: hde3 mountpoint: swap
fsystem: swap format: 0
ismounted: 0
self: <fsset.FileSystemSet instance at 0x81ae4ec>
root: None
raiseErrors: 0
Dispatcher instance, containing members:
method: CdromInstallMethod instance, containing members:
messageWindow: <bound method InstallInterface.messageWindow of <gui.InstallInterface instance at 0x8713904>>
loopbackFile: None
progressWindow: <bound method InstallInterface.progressWindow of <gui.InstallInterface instance at 0x8713904>>
device: hdc
timestamp: 1047611055.799229
tree: /mnt/source
rootPath: /mnt/sysimage
currentDisc: [1]
step: 16
intf: InstallInterface instance, containing members:
icw: InstallControlWindow instance, containing members:
displayHelp: 1
....
mountcount: 4
entries: [fsentry -- device: hde1 mountpoint: /boot
fsystem: ext3 format: 0
ismounted: 1
, fsentry -- device: none mountpoint: /dev/pts
fsystem: devpts format: 0
ismounted: 1
, fsentry -- device: none mountpoint: /dev/shm
fsystem: tmpfs format: 0
ismounted: 0
, fsentry -- device: hdf1 mountpoint: /mnt/hdf1
fsystem: ext3 format: 0
ismounted: 1
, fsentry -- device: none mountpoint: /proc
fsystem: proc format: 0
ismounted: 1
, fsentry -- device: hde3 mountpoint: swap
fsystem: swap format: 0
ismounted: 0
]
progressWindow: <bound method InstallInterface.progressWindow of <gui.InstallInterface instance at 0x8713904>>
migratedfs: 0
keyboard: Keyboard instance, containing members:
....
type: PC
beenset: 1
timezone: Timezone instance, containing members:
utc: 0
utcOffset: 0
arc: 0
tz: None
dst: 0
bootloader: x86BootloaderInfo instance, containing members:
kickstart: 0
doUpgradeOnly: 0
useLinear: 1
defaultDevice: None
useGrubVal: 1
args: KernelArguments instance, containing members:
args: hdg=ide-scsi
kernelLocation: /boot/
images: BootImages instance, containing members:
default: None
images: {}
configfile: /etc/lilo.conf
above1024: 0
serialOptions: None
pure: None
serialDevice: None
device: None
drivelist: [hde, hdf]
serial: 0
password: None
forceLBA32: 0
mouse: FULLNAME="Generic - Wheel Mouse (PS/2)"
MOUSETYPE="imps2"
XEMU3="no"
XMOUSETYPE="IMPS/2"
extraModules: []
network: Network instance, containing members:
domains: []
isConfigured: 0
overrideDHCPhostname: 0
netdevices: {}
primaryNS:
hostname: localhost.localdomain
secondaryNS:
gateway:
ternaryNS:
instClass: InstallClass instance, containing members:
upgradeRemove: []
upgrade: Boolean instance, containing members:
val: 1
monitor: Already dumped
comps: None
floppyDevice: fd0
firstboot: 0
methodstr: cdrom://hdc/mnt/source
videocard: Already dumped
desktop: Desktop instance, containing members:
info: {}
runlevel: 3
instLanguage: InstallTimeLanguage instance, containing members:
current: en_US.UTF-8
....
langList: None
default: None
langNicks: None
supported: []
allSupportedLangs: None
partitions: Partitions instance, containing members:
useFdisk: 0
useAutopartitioning: 1
autoClearPartType: 3
nextUniqueID: 5
reinitializeDisks: 0
autoClearPartDrives: None
zeroMbr: 0
isKickstart: 0
requests: [PreexistingPartitionSpec instance, containing members:
currentDrive: None
badblocks: None
format: None
migrate: None
origfstype: ext3FileSystem instance, containing members:
partedPartitionFlags: []
checked: 1
name: ext3
migratetofs: None
deviceArguments: {}
supported: -1
partedFileSystemType: <PedFileSystemType object at 0x8469900>
defaultOptions: defaults
maxSizeMB: 2097152
extraFormatArgs: [-j]
formattable: 1
linuxnativefs: 1
maxLabelChars: 16
primary: None
fstype: Already dumped
preexist: 1
dev: None
uniqueID: 4
device: hdf1
mountpoint: None
requestSize: 29311.7036133
maxSizeMB: None
size: 29311.7036133
end: 60030431
drive: hdf
fslabel: None
grow: 0
start: 63
protected: 0
ignoreBootConstraints: 0
type: 1
, PreexistingPartitionSpec instance, containing members:
currentDrive: None
badblocks: None
format: None
migrate: None
origfstype: Already dumped
primary: None
fstype: Already dumped
preexist: 1
dev: None
uniqueID: 1
device: hde1
mountpoint: None
requestSize: 99.8833007812
maxSizeMB: None
size: 99.8833007812
end: 204623
drive: hde
fslabel: /boot
grow: 0
start: 63
protected: 0
ignoreBootConstraints: 0
type: 1
, PreexistingPartitionSpec instance, containing members:
currentDrive: None
badblocks: None
format: 1
migrate: None
origfstype: swapFileSystem instance, containing members:
partedPartitionFlags: []
checked: 0
name: swap
migratetofs: None
deviceArguments: {}
supported: 1
partedFileSystemType: <PedFileSystemType object at 0x83ef360>
defaultOptions: defaults
maxSizeMB: 2097152
extraFormatArgs: []
formattable: 1
linuxnativefs: 1
maxLabelChars: 16
primary: None
fstype: Already dumped
preexist: 1
dev: None
uniqueID: 3
device: hde3
mountpoint: None
requestSize: 1279.6875
maxSizeMB: None
size: 1279.6875
end: 78177455
drive: hde
fslabel: None
grow: 0
start: 75556656
protected: 0
ignoreBootConstraints: 0
type: 1
, PreexistingPartitionSpec instance, containing members:
currentDrive: None
badblocks: None
format: None
migrate: None
origfstype: Already dumped
primary: None
fstype: Already dumped
preexist: 1
dev: None
uniqueID: 2
device: hde2
mountpoint: None
requestSize: 36792.984375
maxSizeMB: None
size: 36792.984375
end: 75556655
drive: hde
fslabel: /
grow: 0
start: 204624
protected: 0
ignoreBootConstraints: 0
type: 1
]
autoPartitionRequests: []
deletes: []
upgradeDeps:
configFileData: .
...
flags: Flags instance, containing members:
flags: {'test': 0, 'setupFilesystems': 1, 'serial': 0, 'expert': 0, 'autostep': 0}
dispatch: Already dumped
instPath: /mnt/sysimage
firstStep: 0
id: Already dumped
dir: 1
skipSteps: {'writeconfig': 1, 'xcustom': 1, 'firewall': 1, 'languagesupport': 1, 'firstboot': 1, 'desktopchoice': 1, 'bootloaderadvanced': 1, 'betanag': 1, 'partitionmethodsetup': 1, 'writexconfig': 1, 'networkdevicecheck': 1, 'bootloadersetup': 1, 'accounts': 1, 'makebootdisk': 1, 'installtype': 1, 'partitiondone': 1, 'timezone': 1, 'indivpackage': 1, 'bootloader': 1, 'autopartition': 1, 'selectlangpackages': 1, 'confirminstall': 1, 'enablefilesystems': 1, 'network': 1, 'partitionmethod': 1, 'writeksconfig': 1, 'partition': 1, 'handleX11pkgs': 1, 'setuptime': 1, 'videocard': 1, 'fdasd': 1, 'package-selection': 1, 'authentication': 1, 'monitor': 1, 'autopartitionexecute': 1, 'fdisk': 1}
/tmp/syslog:
<4>Linux version 2.4.20-8BOOT (bhcompile@porky.devel.redhat.com) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:31:38 EST 2003
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 0000000027ff0000 (usable)
<4> BIOS-e820: 0000000027ff0000 - 0000000027ff3000 (ACPI NVS)
<4> BIOS-e820: 0000000027ff3000 - 0000000028000000 (ACPI data)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<5>0MB HIGHMEM available.
<5>639MB LOWMEM available.
<4>On node 0 totalpages: 163824
<4>zone(0): 4096 pages.
<4>zone(1): 159728 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: initrd=initrd.img BOOT_IMAGE=vmlinuz
<6>Initializing CPU#0
<4>Detected 551.264 MHz processor.
<4>Console: colour VGA+ 80x25
<4>Calibrating delay loop... 1101.00 BogoMIPS
<6>Memory: 638984k/655296k available (1209k kernel code, 13748k reserved, 350k data, 104k init, 0k highmem)
<6>Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
<6>Inode cache hash table entries: 65536 (order: 7, 524288 bytes)
<6>Mount cache hash table entries: 512 (order: 0, 4096 bytes)
<4>Buffer-cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Page-cache hash table entries: 262144 (order: 8, 1048576 bytes)
<6>CPU: L1 I Cache: 32K (32 bytes/line), D cache 32K (32 bytes/line)
<7>CPU: After generic, caps: 008021bf 808029bf 00000000 00000002
<7>CPU: Common caps: 008021bf 808029bf 00000000 00000002
<4>CPU: AMD-K6(tm) 3D processor stepping 0c
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<4>POSIX conformance testing by UNIFIX
<4>mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)
<4>mtrr: detected mtrr type: AMD K6
<6>PCI: PCI BIOS revision 2.10 entry at 0xfb3e0, last bus=1
<6>PCI: Using configuration type 1
<6>PCI: Probing PCI hardware
<6>PCI: Using IRQ router VIA [1106/0586] at 00:07.0
<6>Activating ISA DMA hang workarounds.
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<6>BIOS EDD facility v0.09 2003-Jan-22, 2 devices found
<4>Starting kswapd
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
<6>ttyS0 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS1 at 0x02f8 (irq = 3) is a 16550A
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>NET4: Frame Diverter 0.46
<4>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: IDE controller at PCI slot 00:07.1
<6>VP_IDE: chipset revision 6
<6>VP_IDE: not 100% native mode: will probe irqs later
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>VP_IDE: VIA vt82c586b (rev 47) IDE UDMA33 controller on pci00:07.1
<6> ide0: BM-DMA at 0xa000-0xa007, BIOS settings: hda:DMA, hdb:DMA
<6> ide1: BM-DMA at 0xa008-0xa00f, BIOS settings: hdc:DMA, hdd:DMA
<6>PDC20267: IDE controller at PCI slot 00:09.0
<6>PCI: Found IRQ 5 for device 00:09.0
<6>PDC20267: chipset revision 2
<6>PDC20267: not 100% native mode: will probe irqs later
<6>PDC20267: ROM enabled at 0xe8000000
<6>PDC20267: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
<6> ide2: BM-DMA at 0xc000-0xc007, BIOS settings: hde:pio, hdf:DMA
<6> ide3: BM-DMA at 0xc008-0xc00f, BIOS settings: hdg:pio, hdh:pio
<4>hdc: IRQ probe failed (0xfff8)
<4>hdc: IDE DVD-ROM 16X, ATAPI CD/DVD-ROM drive
<4>hde: MAXTOR 6L040L2, ATA DISK drive
<4>hdf: Maxtor 5T030H3, ATA DISK drive
<4>blk: queue c02f5a20, I/O limit 4095Mb (mask 0xffffffff)
<4>blk: queue c02f5b64, I/O limit 4095Mb (mask 0xffffffff)
<4>hdg: PLEXTOR CD-R PX-W4012A, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>ide2 at 0xb000-0xb007,0xb402 on irq 5
<4>ide3 at 0xb800-0xb807,0xbc02 on irq 5
<4>hde: host protected area => 1
<6>hde: 78177792 sectors (40027 MB) w/1820KiB Cache, CHS=77557/16/63, UDMA(100)
<4>hdf: host protected area => 1
<6>hdf: 60030432 sectors (30736 MB) w/2048KiB Cache, CHS=59554/16/63, UDMA(100)
<4>hdc: ATAPI 48X DVD-ROM drive, 512kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<4>hdg: ATAPI 40X CD-ROM CD-R/RW drive, 4096kB Cache
<4>ide-floppy driver 0.99.newide
<6>Partition check:
<6> hde: hde1 hde2 hde3
<6> hdf: hdf1
<4>ide-floppy driver 0.99.newide
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<6>usb-uhci.c: $Revision: 1.275 $ time 17:33:52 Mar 13 2003
<6>usb-uhci.c: High bandwidth mode enabled
<6>usb-uhci.c: USB UHCI at I/O 0xa400, IRQ 10
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 1
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
<6>usb.c: registered new driver hiddev
<6>usb.c: registered new driver hid
<6>hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <vojtech@suse.cz>
<6>hid-core.c: USB HID support drivers
<6>mice: PS/2 mouse device common for all mice
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<6>IP: routing cache hash table of 8192 buckets, 64Kbytes
<6>TCP: Hash tables configured (established 262144 bind 65536)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<6>Freeing initrd memory: 2640k freed
<4>EXT2-fs warning: checktime reached, running e2fsck is recommended
<4>VFS: Mounted root (ext2 filesystem).
<7>vga16fb: initializing
<6>vga16fb: mapped to 0xc00a0000
<4>Console: switching to colour frame buffer device 80x30
<6>fb0: VGA16 VGA frame buffer device
<6>SCSI subsystem driver Revision: 1.00
<6>Linux Tulip driver version 0.9.15-pre12 (Aug 9, 2002)
<6>PCI: Found IRQ 11 for device 00:0a.0
<6>IRQ routing conflict for 00:0a.0, have irq 9, want irq 11
<7>divert: allocating divert_blk for eth0
<6>eth0: ADMtek Comet rev 17 at 0xe886e000, 00:04:5A:50:92:10, IRQ 9.
<7>ISO 9660 Extensions: RRIP_1991A
<4>Unable to identify CD-ROM format.
<4>VFS: Can't find ext2 filesystem on dev loop(7,0).
<4>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
<4>hdc: command error: error=0x54
<4>end_request: I/O error, dev 16:00 (hdc), sector 1257152
<4>Error -3 while decompressing!
<4>c02d54dc(-51022844)->e73a3000(4096)
<6>md: raid0 personality registered as nr 2
<6>md: raid1 personality registered as nr 3
<6>raid5: measuring checksumming speed
<4> 8regs : 708.800 MB/sec
<4> 32regs : 454.400 MB/sec
<4> 8regs_prefetch: 721.200 MB/sec
<4> 32regs_prefetch: 458.400 MB/sec
<4> pII_mmx : 981.600 MB/sec
<4> p5_mmx : 914.000 MB/sec
<4>raid5: using function: pII_mmx (981.600 MB/sec)
<6>md: raid5 personality registered as nr 4
<6>Journalled Block Device driver loaded
<6>LVM version 1.0.5+(22/07/2002) module loaded
<6>parport0: PC-style at 0x378 [PCSPP(,...)]
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,1), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,2), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,65), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,2), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,1), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
<6>kjournald starting. Commit interval 5 seconds
<6>EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,65), internal journal
<6>EXT3-fs: mounted filesystem with ordered data mode.
/tmp/anaconda.log:
* modules to insert fbcon-vga-planes vga16fb
* loaded fbcon-vga-planes from /modules/modules.cgz
* loaded vga16fb from /modules/modules.cgz
* inserted /tmp/fbcon-vga-planes.o
* inserted /tmp/vga16fb.o
* load module set done
* 643804 kB are available
* modules to insert cramfs vfat sunrpc lockd nfs loop
* loaded sunrpc from /modules/modules.cgz
* loaded lockd from /modules/modules.cgz
* loaded nfs from /modules/modules.cgz
* module(s) cramfs vfat loop not found
* inserted /tmp/sunrpc.o
* inserted /tmp/lockd.o
* inserted /tmp/nfs.o
* load module set done
* modules to insert ide-cd
* module(s) ide-cd not found
* load module set done
* modules to insert scsi_mod sd_mod sr_mod
* loaded scsi_mod from /modules/modules.cgz
* loaded sd_mod from /modules/modules.cgz
* loaded sr_mod from /modules/modules.cgz
* inserted /tmp/scsi_mod.o
* inserted /tmp/sd_mod.o
* inserted /tmp/sr_mod.o
* load module set done
* looking for usb controllers
* found USB controller usb-uhci
* modules to insert usb-uhci
* module(s) usb-uhci not found
* load module set done
* waiting for usb to become stable...
* 2 seconds.
* modules to insert hid keybdev
* module(s) hid keybdev not found
* load module set done
* no firewire controller found
* no pcic controller found
* probing buses
* finished bus probing
* modules to insert tulip usb-uhci
* loaded tulip from /modules/modules.cgz
* module(s) usb-uhci not found
* inserted /tmp/tulip.o
* load module set done
* trying to mount device hdc
* mntloop loop0 on /mnt/runtime as /mnt/source/RedHat/base/stage2.img fd is 10
* MD5SUM -> e4db359dbb5cdd2b215059ce70f251a5
* skipsectors = 15
* isostatus = 0
* getting ready to spawn shell now
* exec of /bin/sh failed: Permission denied
* modules to insert ide-cd
* module(s) ide-cd not found
* load module set done
* modules to insert
* load module set done
* probing buses
* finished bus probing
* modules to insert agpgart usb-uhci
* module(s) agpgart usb-uhci not found
* load module set done
* looking for video cards requiring agpgart module
* found video card controller unknown
* modules to insert raid0 raid1 xor raid5 msdos jbd ext3 reiserfs jfs xfs lvm-mod
* loaded raid0 from /mnt/runtime/modules/modules.cgz
* loaded raid1 from /mnt/runtime/modules/modules.cgz
* loaded xor from /mnt/runtime/modules/modules.cgz
* loaded raid5 from /mnt/runtime/modules/modules.cgz
* loaded msdos from /mnt/runtime/modules/modules.cgz
* loaded jbd from /mnt/runtime/modules/modules.cgz
* loaded ext3 from /mnt/runtime/modules/modules.cgz
* loaded reiserfs from /mnt/runtime/modules/modules.cgz
* loaded jfs from /mnt/runtime/modules/modules.cgz
* loaded lvm-mod from /mnt/runtime/modules/modules.cgz
* module(s) xfs not found
* inserted /tmp/raid0.o
* inserted /tmp/raid1.o
* inserted /tmp/xor.o
* inserted /tmp/raid5.o
* inserted /tmp/msdos.o
* inserted /tmp/jbd.o
* inserted /tmp/ext3.o
* inserted /tmp/reiserfs.o
* inserted /tmp/jfs.o
* inserted /tmp/lvm-mod.o
* load module set done
* loading parallel port drivers...
* modules to insert parport parport_pc
* loaded parport from /mnt/runtime/modules/modules.cgz
* loaded parport_pc from /mnt/runtime/modules/modules.cgz
* inserted /tmp/parport.o
* inserted /tmp/parport_pc.o
* load module set done
* looking for USB mouse...
* Running anaconda script /usr/bin/anaconda
* ddcprobe returned bogus values:
ID: None
Name: None
HorizSync: None
VertSync: None
* Started mini-wm
* anaconda floppy device fd0
* running ['/usr/X11R6/bin/setxkbmap', '-layout', 'us', '-model', 'pc105', '-option', '']
* moving (1) to step welcome
* moving (1) to step language
* moving (1) to step keyboard
* running ['/usr/X11R6/bin/setxkbmap', '-layout', 'us', '-model', 'pc105', '-option', '']
* moving (1) to step mouse
* moving (1) to step findrootparts
* going to mount /tmp/hde1 on /mnt/sysimage
* going to mount /tmp/hde2 on /mnt/sysimage
* going to mount /tmp/hdf1 on /mnt/sysimage
* moving (1) to step findinstall
* moving (1) to step partitionobjinit
* moving (1) to step upgrademount
* going to mount hde2 on /mnt/sysimage as ext3
* going to mount /tmp/hde2 on /mnt/sysimage
* Warning: fstab file has LABEL=/main, but this label could not be found on any file system
* going to mount /dev/hde1 on /mnt/sysimage/boot
* going to mount none on /mnt/sysimage/dev/pts
* going to mount /dev/hdf1 on /mnt/sysimage/mnt/hdf1
* going to mount none on /mnt/sysimage/proc
* going to mount /tmp/fd0 on /tmp/crash
/tmp/lvmout:
vgchange -- no volume groups found
"/etc/lvmtab.d"
vgscan -- creating empty "/etc/lvmtab" and "/etc/lvmtab.d"
vgscan -- reading all physical volumes (this may take a while...)
vgscan -- "/etc/lvmtab" and "/etc/lvmtab.d" successfully created
vgscan -- WARNING: This program does not do a VGDA backup of your volume group
Any help would be appreciated. This is my main computer right now, so I am somewhat stuck without it.
Thanks,
Helios007
