|
How do I copy pictures from my kodak digital camera? [SOLVED]
I've been a Linux user for about a year now, and I am very happy to have done so. However, I fear I have overlooked some very important tools that would give me the information I'm looking for.
What I'm trying to do is - Plug in a USB camera find /dev/camera-pseudonym mount /dev/camera-pseudonym /camera cp * ~/pictures umount /dev/camera-pseudonym and then work on adding this camera to /etc/fstab so that it will automatically mount to the usual place. I don't know how to find the pseudonym. I can, lsusb and see Bus 004 Device 009: ID 040a:05c1 Kodak Co. Digital Camera I can fdisk -l and not see any new partitions (which, with most USB devices with storage, I can usually see the partition listed in fdisk -l) After these two commands related to search FOR the pseudonym, I draw a blank and resort to manually searching /dev for things that may be useful. This is difficult, though, because there are dozens of files named usb-something, and they're all very similar to one another, and not related to typical pseudonyms I'm used to (like /dev/usb[0-9], /dev/sd[a-z], etc) I would like to be able to find the /dev entry based on the ID 040a:05c1 because every USB devices I've tried has been listed by lsusb, and is accompanied by an ID number. I really don't even know what that ID number is for (or when it is assigned, or what assigns it), so I will add that to the list of questions. How do I find the pseudonym in /dev for any usb device? What is the ID number in the output from lsusb for? |
Huh.. I guess if I ever do find the answer, then I'll know something that at least 41 other people don't know.
UPDATE -- Device ID numbers as listed by lsusb refer to manufacturer:model kodak:digital camera == 040a:05c1 I don't believe this will be useful in finding the pseudonym for the camera. Also, dmesg gave plenty of info about the device, so I think once I figure out how/where/what the device file is, then I should be able to mount it. *dmesg snip* usb 4-1: new full speed USB device using ohci_hcd and address 4 usb 4-1: New USB device found, idVendor=040a, idProduct=05c1 usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 4-1: Product: KODAK EasyShare M863 Digital Camera usb 4-1: Manufacturer: Eastman Kodak Company usb 4-1: SerialNumber: M863 0A3354156 usb 4-1: configuration #1 chosen from 1 choice *dmesg snip* Assuming no relationship between /dev/usbdev4.1 and usb 4-1: UPDATE-- Modifying previous assumption based on results from udevadm ^[[3~KERNEL[1272854530.049005] add /devices/pci0000:00/0000:00:12.1/usb4/4-1 (usb) KERNEL[1272854530.057339] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0 (usb) KERNEL[1272854530.057357] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/usb_endpoint/usbdev4.11_ep83 (usb_endpoint) KERNEL[1272854530.057370] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/usb_endpoint/usbdev4.11_ep04 (usb_endpoint) KERNEL[1272854530.057381] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/usb_endpoint/usbdev4.11_ep85 (usb_endpoint) KERNEL[1272854530.057392] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/usb_device/usbdev4.11 (usb_device) KERNEL[1272854530.057402] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/usb_endpoint/usbdev4.11_ep00 (usb_endpoint) UDEV [1272854530.062672] add /devices/pci0000:00/0000:00:12.1/usb4/4-1 (usb) UDEV [1272854530.066002] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/usb_device/usbdev4.11 (usb_device) UDEV [1272854530.066561] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/usb_endpoint/usbdev4.11_ep00 (usb_endpoint) UDEV [1272854530.122902] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0 (usb) UDEV [1272854530.123702] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/usb_endpoint/usbdev4.11_ep83 (usb_endpoint) UDEV [1272854530.124235] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/usb_endpoint/usbdev4.11_ep04 (usb_endpoint) UDEV [1272854530.124712] add /devices/pci0000:00/0000:00:12.1/usb4/4-1/4-1:1.0/usb_endpoint/usbdev4.11_ep85 (usb_endpoint) It would appear no "block" situations occur in the previous example. When using a tried and true USB device, the output from udevadm monitor contains block assignments and other pertinent info. UDEV [1272854992.760178] add /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc (block) UDEV [1272854992.817216] add /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc/sdc1 (block) UDEV [1272854992.892895] change /devices/pci0000:00/0000:00:12.2/usb1/1-4/1-4:1.0/host6/target6:0:0/6:0:0:0/block/sdc (block) So, why not for the camera? UPDATE -- Perhaps it is because there are no drivers associated with the device... as per /proc/bus/usb/devices --- T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=12 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1 P: Vendor=040a ProdID=05c1 Rev= 1.00 S: Manufacturer=Eastman Kodak Company S: Product=KODAK EasyShare M863 Digital Camera S: SerialNumber=M863 0A3354156 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=06(still) Sub=01 Prot=01 Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=85(I) Atr=03(Int.) MxPS= 64 Ivl=16ms Likely solution is: find driver, use it, be happy. UPDATE -- Likely solution turned out to be a bit off, but lead to the right answer. The right answer, ladies and gentlemen, was gphoto2. bash-3.1# gphoto2 -p 194-203 Downloading '100_0340.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0340.JPG Downloading '100_0341.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0341.JPG Downloading '100_0342.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0342.JPG Downloading '100_0343.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0343.JPG Downloading '100_0344.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0344.JPG Downloading '100_0345.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0345.JPG Downloading '100_0346.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0346.JPG Downloading '100_0347.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0347.JPG Downloading '100_0348.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0348.JPG Downloading '100_0349.JPG' from folder '/store_00010001/DCIM/100KM863'... Saving file as 100_0349.JPG I win! |
What you ran into there boy is a camera that uses PTP (Picture transfer protocol) which is why you didn't see a block device. Cameras using the PTP protocol doesn't use the standard mass storage system hence they doesn't mount as a volume.
|
Here's the two commands that I use:
get files: Code:
gphoto2 --get-all-filesCode:
gphoto2 -RD |
| All times are GMT -5. The time now is 05:13 AM. |