I downloaded and burned the ISO of the Vector Linux 4.0 Live CD. Checked
the md5sum. However, after burning, the CD does not even boot.
I used another Mandrake CD to boot, my PC booted with that CD no problems at all. This verification indicates that there is probably something wrong with the burn process or the CD.
Here is the CD Burn Log:
Calling: /usr/lib/xcdroast-0.98/bin/xcdrwrap CDRECORD dev=ATAPI:0,0,0 gracetime=2 fs=4096k driveropts=burnfree,noforcespeed -v -useinfo speed=1 -dao -eject -pad -data "/home/vijay/xcdroast/vl40live.iso" ...
scsibus: 0 target: 0 lun: 0
Warning: Using ATA Packet interface.
Warning: The related libscg interface code is in pre alpha.
Warning: There may be fatal problems.
Cdrecord 2.0 (i686-pc-linux-gnu) Copyright (C) 1995-2002 Jörg Schilling
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Vendor_info : ' '
Identifikation : 'RW-321248 '
Revision : '1.01'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : MMC-2 SWABAUDIO BURNFREE FORCESPEED
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R
Drive buf size : 1359872 = 1328 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 264 MB padsize: 30 KB
Total size: 303 MB (30:03.72) = 135279 sectors
Lout start: 303 MB (30:05/54) = 135279 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 7
Is not unrestricted
Is not erasable
ATIP start of lead in: -11597 (97:27/2
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 20
Manufacturer: Princo Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 224570
Forcespeed is OFF.
Starting to write CD/DVD at speed 4 in real SAO mode for single session.
Waiting for reader process to fill input buffer ...
input buffer ready.
BURN-Free is ON.
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01: writing 30 KB of pad data.
Track 01: Total bytes read/written: 277020672/277051392 (135279 sectors).
Writing time: 491.356s
Average write speed 3.7x.
Min drive buffer fill was 94%
Fixating time: 28.976s
cdrecord: fifo had 4364 puts and 4364 gets.
I also have the Vector Linux 3.2 CD. I tried to make a duplicate of it using xcdroast. The duplicate doesn't boot either. Please assist.