LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - General
User Name
Password
Linux - General This Linux forum is for general Linux questions and discussion.
If it is Linux Related and doesn't seem to fit in any other forum then this is the place.

Notices

Reply
 
Search this Thread
Old 03-11-2005, 04:21 PM   #1
the_one2003a
LQ Newbie
 
Registered: Feb 2005
Posts: 12

Rep: Reputation: 0
Has Anybody Installed A Working Skystar2 ?how?


Hi,

I just wanted to know if anybody was able to install SkyStar2 DVB card (DVB-S) and How?

thanks
 
Old 03-11-2005, 04:43 PM   #2
snecklifter
Member
 
Registered: Mar 2004
Location: UK/West Yorkshire/Huddersfield
Distribution: Fedora 7
Posts: 982

Rep: Reputation: 30
Hello there,

Please dont double post - its a bit of a pain and against the forum rules. What I suggest you do is use the newly speeded up search engine on this forum as well as google and see what you get.
 
Old 03-12-2005, 06:15 AM   #3
XavierP
Moderator
 
Registered: Nov 2002
Location: Kent, England
Distribution: Lubuntu
Posts: 19,176
Blog Entries: 4

Rep: Reputation: 430Reputation: 430Reputation: 430Reputation: 430Reputation: 430
http://www.linuxquestions.org/questi...04/01/4/110970 should be a start for you. Looks like you need to recompile.
 
Old 03-12-2005, 04:12 PM   #4
the_one2003a
LQ Newbie
 
Registered: Feb 2005
Posts: 12

Original Poster
Rep: Reputation: 0
Ok, Sorry for double posting

Thanks for your help and sorry for double posting

I surfed many many pages to know about how to install the skystar2 DVB
> card but everything that I tried didn't work. I hope you be able to
> help me in this stuff
>
> I got the latest stable kernel (2.6.10) and compiled it (surely with
> support of skystar2 as module) and booted up with new kernel now what
> should I do to view the satellite channels?
>
> Below are my lsmod and dmesg results that shows the skystar2 modules
> are loaded but I don't have any dvb directory in /dev/ only some of
> the files (dvb dvb0.demux0
> dvb0.dvr0
> dvb0.frondend0
> dvb0.net0)
> that begin with dvb.
>
> lsmod)
> Module Size Used by
> radeon 138500 2
> parport_pc 29636 1
> lp 13164 0
> parport 41928 2 parport_pc,lp
> autofs4 28164 0
> sunrpc 182244 1
> ipt_REJECT 7552 1
> ipt_state 2176 5
> ip_conntrack 45236 1 ipt_state
> iptable_filter 3968 1
> ip_tables 18304 3 ipt_REJECT,ipt_state,iptable_filter
> vfat 14080 3
> fat 45728 1 vfat
> video 16132 0
> button 6928 0
> battery 9604 0
> ac 5124 0
> md5 4608 1
> ipv6 272960 8
> joydev 10432 0
> uhci_hcd 36112 0
> ehci_hcd 41604 0
> i2c_i801 8844 0
> snd_intel8x0 36640 2
> snd_ac97_codec 76000 1 snd_intel8x0
> snd_pcm_oss 55588 0
> snd_mixer_oss 19840 2 snd_pcm_oss
> snd_pcm 110728 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss
> snd_timer 34692 1 snd_pcm
> snd 60260 8
> snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
> soundcore 11360 2 snd
> snd_page_alloc 10372 2 snd_intel8x0,snd_pcm
> skystar2 30980 0
> dvb_core 95400 1 skystar2
> mt352 6148 1 skystar2
> stv0299 10500 1 skystar2
> mt312 8196 1 skystar2
> i2c_core 23040 5 i2c_i801,skystar2,mt352,stv0299,mt312
> floppy 66736 0
> dm_snapshot 18628 0
> dm_zero 2432 0
> dm_mirror 26604 2
> ext3 134280 2
> jbd 86808 1 ext3
> dm_mod 63508 6 dm_snapshot,dm_zero,dm_mirror
> ata_piix 8964 5
> libata 47748 1 ata_piix
> sd_mod 18944 6
> scsi_mod 136192 2 libata,sd_mod
>>lsmod (8524) returned '0'
>
>
>
> dmesg
> Linux version 2.6.10 (root@localhost.localdomain) (gcc version 3.4.2
> 20041017 (Red Hat 3.4.2-6.fc3)) #1 Fri Mar 11 10:03:00 IRST 2005
> BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
> BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS)
> BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> 0MB HIGHMEM available.
> 511MB LOWMEM available.
> On node 0 totalpages: 131056
> DMA zone: 4096 pages, LIFO batch:1
> Normal zone: 126960 pages, LIFO batch:16
> HighMem zone: 0 pages, LIFO batch:1
> DMI 2.2 present.
> ACPI: RSDP (v000 IntelR ) @ 0x000f6be0
> ACPI: RSDT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
> 0x1fff3000
> ACPI: FADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
> 0x1fff3040
> ACPI: MADT (v001 IntelR AWRDACPI 0x42302e31 AWRD 0x00000000) @
> 0x1fff7140
> ACPI: DSDT (v001 INTELR AWRDACPI 0x00001000 MSFT 0x0100000e) @
> 0x00000000
> ACPI: PM-Timer IO Port: 0x408
> Built 1 zonelists
> Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
> Initializing CPU#0
> PID hash table entries: 2048 (order: 11, 32768 bytes)
> Detected 2793.474 MHz processor.
> Using pmtmr for high-res timesource
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
> Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
> Memory: 513940k/524224k available (2506k kernel code, 9672k reserved,
> 642k data, 184k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode...
> Ok.
> Calibrating delay loop... 5537.79 BogoMIPS (lpj=2768896)
> Security Framework v1.0.0 initialized
> SELinux: Initializing.
> SELinux: Starting in permissive mode
> selinux_register_security: Registering secondary module capability
> Capability LSM initialized as secondary
> Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
> CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
> CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000
> monitor/mwait feature present.
> using mwait in idle threads.
> CPU: Trace cache: 12K uops, L1 D cache: 16K
> CPU: L2 cache: 1024K
> CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080
> Intel machine check architecture supported.
> Intel machine check reporting enabled on CPU#0.
> CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
> CPU: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 03
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Checking 'hlt' instruction... OK.
> ACPI: setting ELCR to 0200 (from 0e28)
> checking if image is initramfs... it is
> Freeing initrd memory: 1066k freed
> NET: Registered protocol family 16
> PCI: PCI BIOS revision 2.10 entry at 0xfb250, last bus=2
> PCI: Using configuration type 1
> mtrr: v2.0 (20020519)
> ACPI: Subsystem revision 20041105
> ACPI: Interpreter enabled
> ACPI: Using PIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (00:00)
> PCI: Probing PCI hardware (bus 00)
> PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.2
> PCI: Transparent bridge - 0000:00:1e.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 7 9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0,
> disabled.
> ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 *11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 11 devices
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> PCI: Using ACPI for IRQ routing
> ** PCI interrupts are no longer routed automatically. If this
> ** causes a device to stop working, it is probably because the
> ** driver failed to call pci_enable_device(). As a temporary
> ** workaround, the "pci=routeirq" argument restores the old
> ** behavior. If this argument makes the device work again,
> ** please email the output of "lspci" to bjorn.helgaas@hp.com
> ** so I can fix the driver.
> pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
> apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
> apm: overridden by ACPI.
> audit: initializing netlink socket (disabled)
> audit(1110593183.985:0): initialized
> Total HugeTLB memory allocated, 0
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> SELinux: Registering netfilter hooks
> Initializing Cryptographic API
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> vesafb: probe of vesafb0 failed with error -6
> ACPI: Fan [FAN] (on)
> ACPI: Thermal Zone [THRM] (52 C)
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Real Time Clock Driver v1.12
> Linux agpgart interface v0.100 (c) Dave Jones
> agpgart: Detected an Intel 865 Chipset.
> agpgart: Maximum main memory to use for agp memory: 439M
> agpgart: AGP aperture is 128M @ 0xf0000000
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered
> RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
> divert: not allocating divert_blk for non-ethernet device lo
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with
> idebus=xx
> ide0: I/O resource 0x1F0-0x1F7 not free.
> ide0: ports already in use, skipping probe
> Probing IDE interface ide1...
> hdc: SAMSUNG CDRW/DVD SM-352B, ATAPI CD/DVD-ROM drive
> hdd: ASUS CD-S400/A4, ATAPI CD/DVD-ROM drive
> Probing IDE interface ide2...
> ide2: Wait for ready failed before probe !
> Probing IDE interface ide3...
> ide3: Wait for ready failed before probe !
> Probing IDE interface ide4...
> ide4: Wait for ready failed before probe !
> Probing IDE interface ide5...
> ide5: Wait for ready failed before probe !
> elevator: using anticipatory as default io scheduler
> ide1 at 0x170-0x177,0x376 on irq 15
> hdc: ATAPI 52X DVD-ROM CD-R/RW drive, 8192kB Cache
> Uniform CD-ROM driver Revision: 3.20
> hdd: ATAPI 40X CD-ROM drive, 128kB Cache
> ide-floppy driver 0.99.newide
> usbcore: registered new driver hiddev
> usbcore: registered new driver usbhid
> drivers/usb/input/hid-core.c: v2.0:USB HID core driver
> mice: PS/2 mouse device common for all mice
> input: AT Translated Set 2 keyboard on isa0060/serio0
> input: ImPS/2 Generic Wheel Mouse on isa0060/serio1
> md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
> NET: Registered protocol family 2
> IP: routing cache hash table of 1024 buckets, 32Kbytes
> TCP: Hash tables configured (established 32768 bind 9362)
> Initializing IPsec netlink socket
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> ACPI wakeup devices:
> SLPB PCI0 HUB0 UAR1 USB0 USB1 USB2 USB3 USBE MODM
> ACPI: (supports S0 S1 S4 S5)
> Freeing unused kernel memory: 184k freed
> SCSI subsystem initialized
> libata version 1.10 loaded.
> ata_piix version 1.03
> ata_piix: combined mode detected
> ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
> PCI: setting IRQ 11 as level-triggered
> ACPI: PCI interrupt 0000:00:1f.2[A] -> GSI 11 (level, low) -> IRQ 11
> ata: 0x170 IDE port busy
> PCI: Setting latency timer of device 0000:00:1f.2 to 64
> ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
> ata1: dev 0 cfg 49:2f00 82:7c6b 83:7b09 84:4003 85:7c68 86:3a01 87:4003
> 88:207f
> ata1: dev 0 ATA, max UDMA/133, 160086528 sectors:
> ata1: dev 0 configured for UDMA/133
> scsi0 : ata_piix
> Vendor: ATA Model: Maxtor 6Y080M0 Rev: YAR5
> Type: Direct-Access ANSI SCSI revision: 05
> SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
> SCSI device sda: drive cache: write back
> SCSI device sda: 160086528 512-byte hdwr sectors (81964 MB)
> SCSI device sda: drive cache: write back
> sda: sda1 sda2 < sda5 sda6 > sda3 sda4
> Attached scsi disk sda at scsi0, channel 0, id 0, lun 0
> device-mapper: 4.3.0-ioctl (2004-09-30) initialised: dm-devel@redhat.com
> cdrom: open failed.
> cdrom: open failed.
> kjournald starting. Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> security: 3 users, 4 roles, 280 types, 16 bools
> security: 53 classes, 5494 rules
> SELinux: Completing initialization.
> SELinux: Setting up existing superblocks.
> SELinux: initialized (dev dm-0, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev selinuxfs, type selinuxfs), uses
> genfs_contexts
> SELinux: initialized (dev mqueue, type mqueue), not configured for
> labeling
> SELinux: initialized (dev hugetlbfs, type hugetlbfs), not configured for
> labeling
> SELinux: initialized (dev devpts, type devpts), uses transition SIDs
> SELinux: initialized (dev eventpollfs, type eventpollfs), uses
> genfs_contexts
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
> SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
> SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
> SELinux: initialized (dev proc, type proc), uses genfs_contexts
> SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
> SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
> SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
> SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
> inserting floppy driver for 2.6.10
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 10
> PCI: setting IRQ 10 as level-triggered
> ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 10 (level, low) -> IRQ 10
> drivers/media/dvb/b2c2/skystar2.c: FlexCopII(rev.130) chip found
> drivers/media/dvb/b2c2/skystar2.c: the chip has 6 hardware filters
> DVB: registering new adapter (SkyStar2).
> DVB: registering frontend 0 (ST STV0299 DVB-S)...
> ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
> PCI: setting IRQ 3 as level-triggered
> ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 3 (level, low) -> IRQ 3
> PCI: Setting latency timer of device 0000:00:1f.5 to 64
> intel8x0_measure_ac97_clock: measured 49909 usecs
> intel8x0: clocking to 48000
> hw_random: RNG not detected
> ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 11
> ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 11 (level, low) -> IRQ 11
> ehci_hcd 0000:00:1d.7: EHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.7 to 64
> ehci_hcd 0000:00:1d.7: irq 11, pci mem 0xfa100000
> ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
> PCI: cache line size of 128 is not supported by device 0000:00:1d.7
> ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct
> 2004
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 8 ports detected
> USB Universal Host Controller Interface driver v2.2
> ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
> PCI: setting IRQ 5 as level-triggered
> ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 5 (level, low) -> IRQ 5
> uhci_hcd 0000:00:1d.0: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.0 to 64
> uhci_hcd 0000:00:1d.0: irq 5, io base 0xbc00
> uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9
> PCI: setting IRQ 9 as level-triggered
> ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 9 (level, low) -> IRQ 9
> uhci_hcd 0000:00:1d.1: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.1 to 64
> uhci_hcd 0000:00:1d.1: irq 9, io base 0xb000
> uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 11 (level, low) -> IRQ 11
> uhci_hcd 0000:00:1d.2: UHCI Host Controller
> usb 2-1: new low speed USB device using uhci_hcd and address 2
> PCI: Setting latency timer of device 0000:00:1d.2 to 64
> uhci_hcd 0000:00:1d.2: irq 11, io base 0xb400
> uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 2 ports detected
> ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 5 (level, low) -> IRQ 5
> uhci_hcd 0000:00:1d.3: UHCI Host Controller
> PCI: Setting latency timer of device 0000:00:1d.3 to 64
> uhci_hcd 0000:00:1d.3: irq 5, io base 0xb800
> uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
> input: USB HID v1.10 Mouse [KYE PowerScroll EYE] on usb-0000:00:1d.0-1
> hub 5-0:1.0: USB hub found
> hub 5-0:1.0: 2 ports detected
> md: Autodetecting RAID arrays.
> md: autorun ...
> md: ... autorun DONE.
> SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
> NET: Registered protocol family 10
> Disabled Privacy Extensions on device c03db0c0(lo)
> IPv6 over IPv4 tunneling driver
> divert: not allocating divert_blk for non-ethernet device sit0
> ACPI: Power Button (FF) [PWRF]
> ACPI: Sleep Button (CM) [SLPB]
> ibm_acpi: ec object not found
> EXT3 FS on dm-0, internal journal
> cdrom: open failed.
> cdrom: open failed.
> kjournald starting. Commit interval 5 seconds
> EXT3 FS on sda3, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> SELinux: initialized (dev sda3, type ext3), uses xattr
> SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
> SELinux: initialized (dev sda1, type vfat), uses genfs_contexts
> SELinux: initialized (dev sda5, type vfat), uses genfs_contexts
> SELinux: initialized (dev sda6, type vfat), uses genfs_contexts
> Adding 1048568k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1
> SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses
> genfs_contexts
> parport_pc: Ignoring new-style parameters in presence of obsolete ones
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
> Trying to free free DMA3
> pnp: Device 00:07 disabled.
> ip_tables: (C) 2000-2002 Netfilter core team
> ip_conntrack version 2.1 (4095 buckets, 32760 max) - 356 bytes per
> conntrack
> SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses
> genfs_contexts
> parport_pc: Ignoring new-style parameters in presence of obsolete ones
> pnp: Device 00:07 activated.
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
> lp0: using parport0 (interrupt-driven).
> lp0: console ready
> ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 5 (level, low) -> IRQ 5
> [drm] Initialized radeon 1.11.0 20020828 on minor 0:
> agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
> agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
> agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
> [drm] Loading R200 Microcode
>>dmesg (8550) returned '0'
>
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Has Anybody Installed A Working Skystar2 ?how? the_one2003a Fedora 1 03-12-2005 06:10 AM
SkyStar2 how-to?? manuelkuhs Linux - Hardware 0 06-18-2004 09:27 AM
mandrake and skystar2 paradoxni Mandriva 1 01-31-2004 01:52 PM
Configuring SkyStar2 DVB on Mandrake digimart Linux - Hardware 1 01-29-2004 11:09 AM
looking for a technisat skystar2 driver freelinuxcpp Linux - Hardware 2 09-14-2003 03:33 PM


All times are GMT -5. The time now is 05:31 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration