LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - General (http://www.linuxquestions.org/questions/linux-general-1/)
-   -   hard drive cloned versions of Ubuntu 10.04 and 12.04 boot error (http://www.linuxquestions.org/questions/linux-general-1/hard-drive-cloned-versions-of-ubuntu-10-04-and-12-04-boot-error-4175444428/)

james2b 01-06-2013 10:28 PM

hard drive cloned versions of Ubuntu 10.04 and 12.04 boot error
 
I used Acronis True Image to make a cloned copy of my hard drive which has 3 Windows and 2 Ubuntu Linux installed on it. And when I do select that new hard drive clone with the boot menu, which I use the Windows boot manager and that EasyBCD configuration tool to add in Linux, it shows an error that says; "invalid partition table". So then I booted to the GParted CD which is the newer version, and used the Test Disk tool to check the partition table of the clone drive, and it was all looking good. On the original hard drive I have the Ubuntu grub 2 installed on 10.04 and 12.04 root partition and no issue to boot those Linux on that drive. So is there some fix ? The Windows are; XP, Vista, and 7.

james2b 01-07-2013 01:37 AM

Update to this problem
 
Update to this issue. I re-created my Ubuntu 10.04 and 12.04 boot entries in the utility Easy BCD from the original operating system in this computer, Vista. And from the internal hard drive Ubuntu I ran file system checks with that Disk Utility which shows okay. So now when I select the boot device from this store built 2009 desk top system boot menu to be the external esata cloned drive, that error message is gone, and it now boots to grub 2 when selected from the Windows Boot Manager, but then it just re-directs to boot the internal drive Ubuntu. The one sure way to really troubleshoot that cloned SATA hard drive which is in a external enclosure, is to disconnect my internal hard drive sata cable, then boot up the PC with only the clone drive connected, right ?

syg00 01-07-2013 03:59 AM

Quote:

Originally Posted by james2b (Post 4864312)
The one sure way to really troubleshoot that cloned SATA hard drive which is in a external enclosure, is to disconnect my internal hard drive sata cable, then boot up the PC with only the clone drive connected, right ?

Certainly a good place to start. If the BIOS supports USB booting you might get started, but ISTR that Windoze (Vista) won't boot directly from USB. I could be wrong, but easy to test. Linux loaders (particularly grub{2}) are much more tolerant and IMHO better.

Cloning then attempting to use both drives like that is problematic as the Linux filesystems will have the same UUID - that's what was probably messing with the drive selection from the boot menu; Ubuntu uses UUID. With two copies connected, they are of course no longer unique.

james2b 01-07-2013 04:38 AM

I have that clone drive connected by eSATA which the computer detects the same as an internal sata hard drive. Since I did the clone as a replacement for a possible internal drive failure, which does has a few bad sections in the smart status, I should just keep it as a backup that will boot all 3 of the windows and the 2 Ubuntu Linux most likely when detected as the first drive, (sda), since with both drives that becomes sdb, the 2nd drive. Okay thanks then, and I am glad that it did not clone the bad sectors too. I can try to chainload to that clone external drive from the internal grub.

james2b 01-13-2013 03:24 AM

Since this issue is most likely with the UUID not matching correctly when booting the clone external drive, I ran that boot info script and here is that; Can I just copy and paste in the correct UUID # listed for my Ubuntu 10.04 on sdb6, and for 12.04 on sdb7, then into; /etc/grub.d/40_custom ? I had to delete some of this to shorten it to fit for posting.

Code:

ran on 1-7-2013                  Boot Info Script 0.61      [1 April 2012]

============================= Boot Info Summary: ===============================

 => Windows is installed in the MBR of /dev/sda.
 => Windows is installed in the MBR of /dev/sdb.
 => Windows is installed in the MBR of /dev/sdc.

sda1: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows Vista
    Boot files:        /NST/menu.lst /boot.ini /bootmgr /Boot/BCD
                      /Windows/System32/winload.exe /ntldr /NTDETECT.COM

sda2: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files:        /boot.ini /ntldr /NTDETECT.COM

sda3: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /Windows/System32/winload.exe

sda4: __________________________________________________________________________

    File system:      Extended Partition
    Boot sector type:  -
    Boot sector info:

sda5: __________________________________________________________________________

    File system:      swap
    Boot sector type:  -
    Boot sector info:

sda6: __________________________________________________________________________

    File system:      ext4
    Boot sector type:  Grub2 (v1.97-1.98)
    Boot sector info:  Grub2 (v1.97-1.98) is installed in the boot sector of
                      sda6 and looks at sector 367314739 of the same hard
                      drive for core.img, but core.img can not be found at
                      this location.
    Operating System:  Ubuntu 10.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda7: __________________________________________________________________________

    File system:      ext4
    Boot sector type:  Grub2 (v1.99)
    Boot sector info:  Grub2 (v1.99) is installed in the boot sector of sda7
                      and looks at sector 404015977 of the same hard drive
                      for core.img. core.img is at this location and looks
                      for (,msdos7)/boot/grub on this drive.
    Operating System:  Ubuntu 12.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sda8: __________________________________________________________________________

    File system:      ext2
    Boot sector type:  -
    Boot sector info:
    Operating System: 
    Boot files:       

sda9: __________________________________________________________________________

    File system:      ext2
    Boot sector type:  -
    Boot sector info:
    Operating System: 
    Boot files:       

sda10: _________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:       

sda11: _________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:       

sdb1: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows Vista
    Boot files:        /NST/menu.lst /boot.ini /bootmgr /Boot/BCD
                      /Windows/System32/winload.exe /ntldr /NTDETECT.COM

sdb2: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows XP: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows XP
    Boot files:        /boot.ini /ntldr /NTDETECT.COM

sdb3: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System:  Windows 7
    Boot files:        /Windows/System32/winload.exe

sdb4: __________________________________________________________________________

    File system:      Extended Partition
    Boot sector type:  -
    Boot sector info:

sdb5: __________________________________________________________________________

    File system:      swap
    Boot sector type:  -
    Boot sector info:

sdb6: __________________________________________________________________________

    File system:      ext4
    Boot sector type:  Grub2 (v1.97-1.98)
    Boot sector info:  Grub2 (v1.97-1.98) is installed in the boot sector of
                      sdb6 and looks at sector 367287795 of the same hard
                      drive for core.img, but core.img can not be found at
                      this location.
    Operating System:  Ubuntu 10.04.4 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdb7: __________________________________________________________________________

    File system:      ext4
    Boot sector type:  Grub2 (v1.99)
    Boot sector info:  Grub2 (v1.99) is installed in the boot sector of sdb7
                      and looks at sector 416062001 of the same hard drive
                      for core.img, but core.img can not be found at this
                      location.
    Operating System:  Ubuntu 12.04.1 LTS
    Boot files:        /boot/grub/grub.cfg /etc/fstab /boot/grub/core.img

sdb8: __________________________________________________________________________

    File system:      ext2
    Boot sector type:  -
    Boot sector info:
    Operating System: 
    Boot files:       

sdb9: __________________________________________________________________________

    File system:      ext2
    Boot sector type:  -
    Boot sector info:
    Operating System: 
    Boot files:       

sdb10: _________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  According to the info in the boot sector, sdb10
                      starts at sector 63.
    Operating System: 
    Boot files:       

sdc1: __________________________________________________________________________

    File system:      ntfs
    Boot sector type:  Windows Vista/7: NTFS
    Boot sector info:  No errors found in the Boot Parameter Block.
    Operating System: 
    Boot files:       

============================ Drive/Partition Info: =============================

Drive: sda _____________________________________________________________________

Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sda1    *            63  136,316,198  136,316,136  7 NTFS / exFAT / HPFS
/dev/sda2        136,316,928  199,235,583    62,918,656  7 NTFS / exFAT / HPFS
/dev/sda3        199,237,632  356,528,127  157,290,496  7 NTFS / exFAT / HPFS
/dev/sda4        356,530,606  976,773,119  620,242,514  5 Extended
/dev/sda5        356,530,608  358,635,059    2,104,452  82 Linux swap / Solaris
/dev/sda6        358,635,123  390,090,329    31,455,207  83 Linux
/dev/sda7        390,090,393  421,545,599    31,455,207  83 Linux
/dev/sda8        421,545,663  455,098,367    33,552,705  83 Linux
/dev/sda9        455,100,416  486,557,695    31,457,280  83 Linux
/dev/sda10        486,559,744  528,502,783    41,943,040  7 NTFS / exFAT / HPFS
/dev/sda11        528,504,832  976,773,119  448,268,288  7 NTFS / exFAT / HPFS


Drive: sdb _____________________________________________________________________

Disk /dev/sdb: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdb1    *            63  161,356,859  161,356,797  7 NTFS / exFAT / HPFS
/dev/sdb2        161,356,860  235,818,134    74,461,275  7 NTFS / exFAT / HPFS
/dev/sdb3        235,818,135  421,979,354  186,161,220  7 NTFS / exFAT / HPFS
/dev/sdb4        421,979,355  625,153,409  203,174,055  f W95 Extended (LBA)
/dev/sdb5        421,979,418  424,083,869    2,104,452  82 Linux swap / Solaris
/dev/sdb6        424,083,933  461,306,474    37,222,542  83 Linux
/dev/sdb7        461,306,538  498,529,079    37,222,542  83 Linux
/dev/sdb8        498,529,143  538,241,759    39,712,617  83 Linux
/dev/sdb9        538,241,823  575,480,429    37,238,607  83 Linux
/dev/sdb10        575,480,493  625,137,344    49,656,852  7 NTFS / exFAT / HPFS

/dev/sdb4 ends after the last sector of /dev/sdb

Drive: sdc _____________________________________________________________________

Disk /dev/sdc: 120.0 GB, 120034123776 bytes
255 heads, 63 sectors/track, 14593 cylinders, total 234441648 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes

Partition  Boot  Start Sector    End Sector  # of Sectors  Id System

/dev/sdc1              2,048  125,835,263  125,833,216  7 NTFS / exFAT / HPFS


"blkid" output: ________________________________________________________________

Device          UUID                                  TYPE      LABEL

/dev/sda1        FEBCA8E4BCA89923                      ntfs      Vista-64
/dev/sda10      5B81A6E635A82E81                      ntfs     
/dev/sda11      2E0422F630F6BE2A                      ntfs      big-ntfs
/dev/sda2        0C304BFB304BE9F2                      ntfs      XP
/dev/sda3        9CBC1DC4BC1D99BA                      ntfs      Windows 7
/dev/sda5        24960ec2-7042-4ff5-83ed-971ec37d7db1  swap     
/dev/sda6        0d038158-1bce-4602-8d27-55eba42bbd9c  ext4     
/dev/sda7        dbce0e73-9dcc-4924-8d21-a412606ff6bc  ext4     
/dev/sda8        e915031c-9711-4690-9467-90602d3453f5  ext2     
/dev/sda9        8c241979-2e44-4049-9f35-67cd33185ac6  ext2     
/dev/sdb1        CD5CA3F64C5CDEC2                      ntfs      Vista-clone
/dev/sdb10      01FBF2894D18190A                      ntfs      ntfs-clone
/dev/sdb2        E55F3A53A49E7E86                      ntfs      XP-clone
/dev/sdb3        5DFD662B02AF1196                      ntfs      Win7-clone
/dev/sdb5        c757d668-2169-1722-c6cf-4eddfa9df23c  swap     
/dev/sdb6        562ad67b-2bdd-b9b0-b443-05bda0986d0c  ext4      Ubuntu clone
/dev/sdb7        1fd0dd80-3ec2-fc1e-b182-b529cbc174cf  ext4      12.04 clone
/dev/sdb8        940cb0f5-e230-3abd-25e7-c9847aee992d  ext2     
/dev/sdb9        7def511c-f1c4-31b2-3beb-3a43ecab52cc  ext2     
/dev/sdc1        E83AA1DD3AA1A8D0                      ntfs      SSD

================================ Mount points: =================================

Device          Mount_Point              Type      Options

/dev/sda6        /                        ext4      (rw,errors=remount-ro)


============================== sda1/NST/menu.lst: ==============================

--------------------------------------------------------------------------------
# NeoSmart NeoGrub Bootloader Configuration File
#
# This is the NeoGrub configuration file, and should be located at C:\NST\menu.lst
# Please see the EasyBCD Documentation for information on how to create/modify entries:
# http://neosmart.net/wiki/display/EBCD/
default 0
timeout 20

title Ubuntu 10.04
root (hd0,5)
chainloader +1
boot

title Ubuntu 12.04 Linux
root (hd0,6)
chainloader +1
boot

--------------------------------------------------------------------------------

================================ sda1/boot.ini: ================================

--------------------------------------------------------------------------------
; This boot.ini was automatically generated by NeoSmart Technologies' BootGrabber.exe
; Use EasyBCD from http://neosmart.net/dl.php?id=1 to manage your bootloader

[boot loader]
timeout=15
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Windows XP on N:\" /fastdetect
--------------------------------------------------------------------------------

=================== sda1: Location of files loaded by Grub: ====================

          GiB - GB            File                                Fragment(s)

            ?? = ??            NST/menu.lst                                  0

================================ sda2/boot.ini: ================================

--------------------------------------------------------------------------------
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(2)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(2)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect
--------------------------------------------------------------------------------

=========================== sda6/boot/grub/grub.cfg: ===========================

--------------------------------------------------------------------------------
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
#

### BEGIN /etc/grub.d/00_header ###
if [ -s $prefix/grubenv ]; then
  load_env
fi
set default="0"
if [ ${prev_saved_entry} ]; then
  set saved_entry=${prev_saved_entry}
  save_env saved_entry
  set prev_saved_entry=
  save_env prev_saved_entry
  set boot_once=true
fi

function savedefault {
  if [ -z ${boot_once} ]; then
    saved_entry=${chosen}
    save_env saved_entry
  fi
}

function recordfail {
  set recordfail=1
  if [ -n ${have_grubenv} ]; then if [ -z ${boot_once} ]; then save_env recordfail; fi; fi
}
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
if loadfont /usr/share/grub/unicode.pf2 ; then
  set gfxmode=640x480
  insmod gfxterm
  insmod vbe
  if terminal_output gfxterm ; then true ; else
    # For backward compatibility with versions of terminal.mod that don't
    # understand terminal_output
    terminal gfxterm
  fi
fi
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
set locale_dir=($root)/boot/grub/locale
set lang=en
insmod gettext
if [ ${recordfail} = 1 ]; then
  set timeout=-1
else
  set timeout=10
fi
### END /etc/grub.d/00_header ###

### BEGIN /etc/grub.d/05_debian_theme ###
insmod ext2
set root='(hd0,6)'
search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
insmod png
if background_image /boot/grub/moreblue-orbit-grub.png ; then
  set color_normal=black/black
  set color_highlight=magenta/black
else
  set menu_color_normal=white/black
  set menu_color_highlight=black/light-gray
fi
### END /etc/grub.d/05_debian_theme ###

### BEGIN /etc/grub.d/10_linux ###
menuentry 'Ubuntu, with Linux 2.6.32-45-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd0,6)'
        search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
        linux        /boot/vmlinuz-2.6.32-45-generic-pae root=UUID=0d038158-1bce-4602-8d27-55eba42bbd9c ro  quiet splash
        initrd        /boot/initrd.img-2.6.32-45-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.32-45-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd0,6)'
        search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
        echo        'Loading Linux 2.6.32-45-generic-pae ...'
        linux        /boot/vmlinuz-2.6.32-45-generic-pae root=UUID=0d038158-1bce-4602-8d27-55eba42bbd9c ro single
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-2.6.32-45-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.32-44-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd0,6)'
        search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
        linux        /boot/vmlinuz-2.6.32-44-generic-pae root=UUID=0d038158-1bce-4602-8d27-55eba42bbd9c ro  quiet splash
        initrd        /boot/initrd.img-2.6.32-44-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.32-44-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd0,6)'
        search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
        echo        'Loading Linux 2.6.32-44-generic-pae ...'
        linux        /boot/vmlinuz-2.6.32-44-generic-pae root=UUID=0d038158-1bce-4602-8d27-55eba42bbd9c ro single
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-2.6.32-44-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.32-42-generic-pae' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd0,6)'
        search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
        linux        /boot/vmlinuz-2.6.32-42-generic-pae root=UUID=0d038158-1bce-4602-8d27-55eba42bbd9c ro  quiet splash
        initrd        /boot/initrd.img-2.6.32-42-generic-pae
}
menuentry 'Ubuntu, with Linux 2.6.32-42-generic-pae (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os {
        recordfail
        insmod ext2
        set root='(hd0,6)'
        search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
        echo        'Loading Linux 2.6.32-42-generic-pae ...'
        linux        /boot/vmlinuz-2.6.32-42-generic-pae root=UUID=0d038158-1bce-4602-8d27-55eba42bbd9c ro single
        echo        'Loading initial ramdisk ...'
        initrd        /boot/initrd.img-2.6.32-42-generic-pae
}
### END /etc/grub.d/10_linux ###

### BEGIN /etc/grub.d/20_memtest86+ ###
menuentry "Memory test (memtest86+)" {
        insmod ext2
        set root='(hd0,6)'
        search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
        linux16        /boot/memtest86+.bin
}
menuentry "Memory test (memtest86+, serial console 115200)" {
        insmod ext2
        set root='(hd0,6)'
        search --no-floppy --fs-uuid --set 0d038158-1bce-4602-8d27-55eba42bbd9c
        linux16        /boot/memtest86+.bin console=ttyS0,115200n8
}
### END /etc/grub.d/20_memtest86+ ###

### BEGIN /etc/grub.d/30_os-prober ###
menuentry "Windows 7 (loader) (on /dev/sda1)" {
        insmod ntfs
        set root='(hd0,1)'
        search --no-floppy --fs-uuid --set FEBCA8E4BCA89923
        chainloader +1
}
menuentry "Microsoft Windows XP Professional (on /dev/sda2)" {
        insmod ntfs
        set root='(hd0,2)'
        search --no-floppy --fs-uuid --set 0C304BFB304BE9F2
        drivemap -s (hd0) ${root}
        chainloader +1
}
menuentry "Ubuntu, with Linux 3.2.0-35-generic-pae (on /dev/sda7)" {
        insmod ext2
        set root='(hd0,7)'
        search --no-floppy --fs-uuid --set dbce0e73-9dcc-4924-8d21-a412606ff6bc
        linux /boot/vmlinuz-3.2.0-35-generic-pae root=UUID=dbce0e73-9dcc-4924-8d21-a412606ff6bc ro quiet splash $vt_handoff
        initrd /boot/initrd.img-3.2.0-35-generic-pae
}
menuentry "Ubuntu, with Linux 3.2.0-35-generic-pae (recovery mode) (on /dev/sda7)" {
        insmod ext2
        set root='(hd0,7)'
        search --no-floppy --fs-uuid --set dbce0e73-9dcc-4924-8d21-a412606ff6bc
        linux /boot/vmlinuz-3.2.0-35-generic-pae root=UUID=dbce0e73-9dcc-4924-8d21-a412606ff6bc ro recovery nomodeset
        initrd /boot/initrd.img-3.2.0-35-generic-pae
}
menuentry "Ubuntu, with Linux 3.2.0-34-generic-pae (on /dev/sda7)" {
        insmod ext2
        set root='(hd0,7)'
        search --no-floppy --fs-uuid --set dbce0e73-9dcc-4924-8d21-a412606ff6bc
        linux /boot/vmlinuz-3.2.0-34-generic-pae root=UUID=dbce0e73-9dcc-4924-8d21-a412606ff6bc ro quiet splash $vt_handoff
        initrd /boot/initrd.img-3.2.0-34-generic-pae
}
menuentry "Ubuntu, with Linux 3.2.0-34-generic-pae (recovery mode) (on /dev/sda7)" {
        insmod ext2
        set root='(hd0,7)'
        search --no-floppy --fs-uuid --set dbce0e73-9dcc-4924-8d21-a412606ff6bc
        linux /boot/vmlinuz-3.2.0-34-generic-pae root=UUID=dbce0e73-9dcc-4924-8d21-a412606ff6bc ro recovery nomodeset
        initrd /boot/initrd.img-3.2.0-34-generic-pae
}
menuentry "Ubuntu, with Linux 3.2.0-29-generic-pae (on /dev/sda7)" {
        insmod ext2
        set root='(hd0,7)'
        search --no-floppy --fs-uuid --set dbce0e73-9dcc-4924-8d21-a412606ff6bc
        linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=dbce0e73-9dcc-4924-8d21-a412606ff6bc ro quiet splash $vt_handoff
        initrd /boot/initrd.img-3.2.0-29-generic-pae
}
menuentry "Ubuntu, with Linux 3.2.0-29-generic-pae (recovery mode) (on /dev/sda7)" {
        insmod ext2
        set root='(hd0,7)'
        search --no-floppy --fs-uuid --set dbce0e73-9dcc-4924-8d21-a412606ff6bc
        linux /boot/vmlinuz-3.2.0-29-generic-pae root=UUID=dbce0e73-9dcc-4924-8d21-a412606ff6bc ro recovery nomodeset
        initrd /boot/initrd.img-3.2.0-29-generic-pae
}
### END /etc/grub.d/30_os-prober ###

### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries.  Simply type the
# menu entries you want to add after this comment.  Be careful not to change
# the 'exec tail' line above.

menuentry "Ubuntu 12.04 on sda7" {
set root=(hd0,7)
chainloader +1
}

menuentry "external mbr on sdb" {
set root=(hd1)
chainloader +1
}

menuentry "Fedora 15 on sdb1" {
set root=(hd1,1)
chainloader +1
}

menuentry "PCLinux on sdb2" {
set root=(hd1,2)
chainloader +1
}

menuentry "Mint on sdb3" {
set root=(hd1,3)
chainloader +1
}

menuentry "Fedora 14 on sdb5" {
set root=(hd1,5)
chainloader +1
}

menuentry "Kubuntu 10.04 on sdb7" {
set root=(hd1,7)
chainloader +1
}

menuentry "Mandriva on sdb8" {
set root=(hd1,8)
chainloader +1
}
### END /etc/grub.d/40_custom ###
--------------------------------------------------------------------------------

=============================== sda6/etc/fstab: ================================

--------------------------------------------------------------------------------
# /etc/fstab: static file system information.
#
# Use 'blkid -o value -s UUID' to print the universally unique identifier
# for a device; this may be used with UUID= as a more robust way to name
# devices that works even if disks are added and removed. See fstab(5).
#
# <file system> <mount point>  <type>  <options>      <dump>  <pass>
proc            /proc          proc    nodev,noexec,nosuid 0      0
/dev/sda6      /              ext4    errors=remount-ro 0      1
# swap was on /dev/sda5 during installation
UUID=24960ec2-7042-4ff5-83ed-971ec37d7db1 none            swap    sw              0      0
--------------------------------------------------------------------------------

=================== sda6: Location of files loaded by Grub: ====================

          GiB - GB            File                                Fragment(s)

 175.136495113 = 188.051379712  boot/grub/core.img                            1
 173.541955471 = 186.339255808  boot/grub/grub.cfg                            1
 176.404340267 = 189.412718080  boot/initrd.img-2.6.32-42-generic-pae          1
 176.518830776 = 189.535651328  boot/initrd.img-2.6.32-44-generic-pae          1
 176.653874874 = 189.680653824  boot/initrd.img-2.6.32-45-generic-pae          1
 176.350389004 = 189.354788352  boot/vmlinuz-2.6.32-42-generic-pae            1
 174.973435879 = 187.876296192  boot/vmlinuz-2.6.32-44-generic-pae            2
 172.399220943 = 185.112253952  boot/vmlinuz-2.6.32-45-generic-pae            1
 176.653874874 = 189.680653824  initrd.img                                    1
 176.518830776 = 189.535651328  initrd.img.old                                1
 172.399220943 = 185.112253952  vmlinuz                                        1
 174.973435879 = 187.876296192  vmlinuz.old                                    2

=========================== sda7/boot/grub/grub.cfg: ===========================

============================== StdErr Messages: ===============================

lzma: Decoder error



All times are GMT -5. The time now is 09:09 PM.