Hi, I'm a Red Hat Linux beginner.
How should I exit from the system when reaching the point where you type your ID and password when entering. I restart my PC, but I suppose that is wrong because every time I enter Red Hat, the system begins checking because of "Incorrect unmount". And now I have another problem. Now the system is no longer able to finish the ckecking described in the previous paragraph, reporting the following: checking root filesystem /dev /hdc 6 contains a file system with errors, check forced /dev /hdc 6: Unattached inode 313338 /dev /hdc 6: UNEXPECTED INCONSISTENCY; RUN fsck MANUALLY (i.e., without -a or -p options) FAILED *** An error ocurred during the file system check *** Dropping you to a shell; the system will reboot *** when you leave the shell Give root password for maintenance (or type Control-D for normal startup): Thank you very much |
To shutdown your system you should type:
Code:
shutdown -h now 1) Give the root password at the prompt. This should bring you into single user mode. 2) type fsck /dev/hdc6 3) Reboot If you are still having problems let us know. |
How, then, can you run fsck on a mounted AND busy partition?
|
Good catch bjc, I must have been in a hurry when I typed that. Step 1.5 would be to make sure that the filesystem is not mounted. If it it is not possible to unmount the partition (say /sbin or / is on the bad partition) then you would need to boot with a floppy. If you need any more info let us know.
|
I have a similar problem upon bootup. Only sometimes do I have the option to enter root password for maintenance though. The rest of the time, I get a series of errors that preclude "Code: 84 3b...", a kernel panic message, and a sync problem. When I do enter the root password it crashes also. Any recommendations?
ph |
More On Forced Checks
I have a similar problem to that posted above with a Mandrake KDE installation. e2fsck detects errors on boot, reports at length, claims to have fixed the problems with blocks and inodes, but the "fix" doesn't stick. I have compounded my issue by running this install as an img file rather than on an actual partition and haven't quite figured out what to throw on a boot disk. . . I've also looked at debugfs which appears to have better manual tools than e2fsck but. . . has its own complexities.
Thanks for your thoughts! |
All times are GMT -5. The time now is 11:51 PM. |