LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Linux - Enterprise (http://www.linuxquestions.org/questions/linux-enterprise-47/)
-   -   Fatal server error: No Screen found (http://www.linuxquestions.org/questions/linux-enterprise-47/fatal-server-error-no-screen-found-320682/)

prasath 05-06-2005 06:56 AM

Fatal server error: No Screen found
 
Hi,
I'm facing outof frequency while installing the Redhat Entrerprise Linux 4. So I did the installation on text mode, after finishing the installation when i type "startx" its giving the following error. Can anyone help me in this regards pls.

XFree86 Version 4.3.0 (Red Hat Enterprise Linux release: 4.3.0-35.EL)
Release Date: 15 August 2003
X Protocol Version 11, Revision 0, Release 6.6
Build Operating System: Linux 2.4.21-2.ELsmp i686 [ELF]
Build Date: 03 October 2003
Build Host: daffy.perf.redhat.com

Before reporting any problems, please make sure you are using the most
recent XFree86 packages available from Red Hat by checking for updates
at or by using the Red Hat Network up2date
tool. If you still encounter problems, please file bug reports in the
XFree86.org bugzilla
Module Loader present
OS Kernel: Linux version 2.4.21-4.EL (bhcompile@daffy.perf.redhat.com) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-20)) #1 Fri Oct 3 17:52:56 EDT 2003
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/XFree86.0.log", Time: Wed Apr 20 18:47:22 2005
(==) Using config file: "/etc/X11/XF86Config"
(==) ServerLayout "Default Layout"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Videocard0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "XkbRules" "xfree86"
(**) XKB: rules: "xfree86"
(**) Option "XkbModel" "pc105"
(**) XKB: model: "pc105"
(**) Option "XkbLayout" "us"
(**) XKB: layout: "us"
(==) Keyboard: CustomKeycode disabled
(**) |-->Input Device "DevInputMice"
(**) FontPath set to "unix/:7100"
(**) RgbPath set to "/usr/X11R6/lib/X11/rgb"
(==) ModulePath set to "/usr/X11R6/lib/modules"
(--) using VT number 7

(II) Open APM successful
(II) Module ABI versions:
XFree86 ANSI C Emulation: 0.2
XFree86 Video Driver: 0.6
XFree86 XInput driver : 0.4
XFree86 Server Extension : 0.2
XFree86 Font Renderer : 0.4
(II) Loader running on linux
(II) LoadModule: "bitmap"
(II) Loading /usr/X11R6/lib/modules/fonts/libbitmap.a
(II) Module bitmap: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Bitmap
(II) LoadModule: "pcidata"
(II) Loading /usr/X11R6/lib/modules/libpcidata.a
(II) Module pcidata: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) PCI: Probing config type using method 1
(II) PCI: Config type is 1
(II) PCI: stages = 0x03, oldVal1 = 0x8000003c, mode1Res1 = 0x80000000
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 1106,3116 card 1106,3116 rev 00 class 06,00,00 hdr 00
(II) PCI: 00:01:0: chip 1106,b091 card 0000,0000 rev 00 class 06,04,00 hdr 01
(II) PCI: 00:06:0: chip 134d,2189 card 134d,1002 rev 03 class 07,03,00 hdr 00
(II) PCI: 00:10:0: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:1: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:2: chip 1106,3038 card 1106,3038 rev 80 class 0c,03,00 hdr 80
(II) PCI: 00:10:3: chip 1106,3104 card 1462,3901 rev 82 class 0c,03,20 hdr 00
(II) PCI: 00:11:0: chip 1106,3177 card 1106,3177 rev 00 class 06,01,00 hdr 80
(II) PCI: 00:11:1: chip 1106,0571 card 1462,3901 rev 06 class 01,01,8a hdr 00
(II) PCI: 00:11:5: chip 1106,3059 card 1462,3901 rev 50 class 04,01,00 hdr 00
(II) PCI: 01:00:0: chip 5333,8d04 card 1462,3908 rev 00 class 03,00,00 hdr 00
(II) PCI: End of PCI scan
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:0:0), (0,0,1), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
(II) PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:1:0), (0,1,1), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xe0000000 - 0xe1ffffff (0x2000000) MX[B]
(II) Bus 1 prefetchable memory range:
[0] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B]
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(--) PCI:*(1:0:0) S3 Inc. [ProSavageDDR K4M266] rev 0, Mem @ 0xe1000000/19, 0xd8000000/27
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[B]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[B]
(II) OS-reported resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) PCI Memory resource overlap reduced 0xd0000000 from 0xd7ffffff to 0xcfffffff
(II) Active PCI resource ranges:
[0] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[1] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B]
[2] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[3] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[4] -1 0 0xe1000000 - 0xe107ffff (0x80000) MX[B](B)
[5] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[6] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[7] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[8] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[9] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B]
[10] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[1] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B]
[2] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[3] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[4] -1 0 0xe1000000 - 0xe107ffff (0x80000) MX[B](B)
[5] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[6] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[7] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[8] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[9] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B]
[10] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[6] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) All system resource ranges:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[6] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B]
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xe1000000 - 0xe107ffff (0x80000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[13] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[14] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[15] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[16] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B]
[17] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
(II) LoadModule: "dbe"
(II) Loading /usr/X11R6/lib/modules/extensions/libdbe.a
(II) Module dbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "extmod"
(II) Loading /usr/X11R6/lib/modules/extensions/libextmod.a
(II) Module extmod: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension FontCache
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "fbdevhw"
(II) Loading /usr/X11R6/lib/modules/linux/libfbdevhw.a
(II) Module fbdevhw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.0.2
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "glx"
(II) Loading /usr/X11R6/lib/modules/extensions/libglx.a
(II) Module glx: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/X11R6/lib/modules/extensions/libGLcore.a
(II) Module GLcore: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/X11R6/lib/modules/extensions/librecord.a
(II) Module record: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.13.0
Module class: XFree86 Server Extension
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension RECORD
(II) LoadModule: "freetype"
(II) Loading /usr/X11R6/lib/modules/fonts/libfreetype.a
(II) Module freetype: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 2.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font FreeType
(II) LoadModule: "type1"
(II) Loading /usr/X11R6/lib/modules/fonts/libtype1.a
(II) Module type1: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.2
Module class: XFree86 Font Renderer
ABI class: XFree86 Font Renderer, version 0.4
(II) Loading font Type1
(II) Loading font CID
(II) LoadModule: "dri"
(II) Loading /usr/X11R6/lib/modules/extensions/libdri.a
(II) Module dri: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading sub module "drm"
(II) LoadModule: "drm"
(II) Loading /usr/X11R6/lib/modules/linux/libdrm.a
(II) Module drm: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Server Extension, version 0.2
(II) Loading extension XFree86-DRI
(II) LoadModule: "savage"
(II) Loading /usr/X11R6/lib/modules/drivers/savage_drv.o
(II) Module savage: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.27
Module class: XFree86 Video Driver
ABI class: XFree86 Video Driver, version 0.6
(II) LoadModule: "mouse"
(II) Loading /usr/X11R6/lib/modules/input/mouse_drv.o
(II) Module mouse: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
Module class: XFree86 XInput Driver
ABI class: XFree86 XInput driver, version 0.4
(II) SAVAGE: driver (version 1.1.27mh) for S3 Savage chipsets: Savage4,
Savage3D, Savage3D-MV, Savage2000, Savage/MX-MV, Savage/MX,
Savage/IX-MV, Savage/IX, ProSavage PM133, ProSavage KM133,
Twister PN133, Twister KN133, SuperSavage/MX 128, SuperSavage/MX 64,
SuperSavage/MX 64C, SuperSavage/IX 128, SuperSavage/IX 128,
SuperSavage/IX 64, SuperSavage/IX 64, SuperSavage/IXC 64,
SuperSavage/IXC 64, ProSavage DDR, ProSavage DDR-K
(II) Primary Device is: PCI 01:00:0
(--) Assigning device section with no busID to primary device
(--) Chipset ProSavage found
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[6] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B]
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xe1000000 - 0xe107ffff (0x80000) MX[B](B)
[10] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[11] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[12] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[13] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[14] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[15] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[16] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B]
[17] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
(II) resource ranges after probing:
[0] -1 0 0xffe00000 - 0xffffffff (0x200000) MX[B](B)
[1] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
[2] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
[3] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
[4] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
[5] -1 0 0xe2001000 - 0xe20010ff (0x100) MX[B]
[6] -1 0 0xe2000000 - 0xe2000fff (0x1000) MX[B]
[7] -1 0 0xd0000000 - 0xcfffffff (0x0) MX[B]O
[8] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
[9] -1 0 0xe1000000 - 0xe107ffff (0x80000) MX[B](B)
[10] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
[11] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
[12] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
[13] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
[14] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
[15] -1 0 0x0000b400 - 0x0000b4ff (0x100) IX[B]
[16] -1 0 0x0000b000 - 0x0000b00f (0x10) IX[B]
[17] -1 0 0x0000ac00 - 0x0000ac1f (0x20) IX[B]
[18] -1 0 0x0000a800 - 0x0000a81f (0x20) IX[B]
[19] -1 0 0x0000a400 - 0x0000a41f (0x20) IX[B]
[20] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[B]
[21] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
[22] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Setting vga for screen 0.
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/X11R6/lib/modules/libvgahw.a
(II) Module vgahw: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 0.1.0
ABI class: XFree86 Video Driver, version 0.6
(**) SAVAGE(0): Depth 24, (--) framebuffer bpp 32
(==) SAVAGE(0): RGB weight 888
(==) SAVAGE(0): Default visual is TrueColor
(II) SAVAGE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) SAVAGE(0): Using HW cursor
(==) SAVAGE(0): Using video BIOS to set modes
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.6
(II) SAVAGE(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/X11R6/lib/modules/libvbe.a
(II) Module vbe: vendor="The XFree86 Project"
compiled for 4.3.0, module version = 1.1.0
ABI class: XFree86 Video Driver, version 0.6
(II) SAVAGE(0): VESA BIOS detected
(II) SAVAGE(0): VESA VBE Version 3.0
(II) SAVAGE(0): VESA VBE Total Mem: 31680 kB
(II) SAVAGE(0): VESA VBE OEM: S3 Graphics ProSavage DDR Family BIOS
(II) SAVAGE(0): VESA VBE OEM Software Rev: 2.0
(II) SAVAGE(0): VESA VBE OEM Vendor: S3 Garphics Incorporated.
(II) SAVAGE(0): VESA VBE OEM Product: VBE 3.0
(II) SAVAGE(0): VESA VBE OEM Product Rev: Rev 0.0
(--) SAVAGE(0): Chip: id 8d04, "ProSavage DDR-K"
(--) SAVAGE(0): Engine: "ProSavage"
(--) SAVAGE(0): mapping MMIO @ 0xe1000000 with size 0x80000
(==) SAVAGE(0): Using gamma correction (1.0, 1.0, 1.0)
(--) SAVAGE(0): probed videoram: 32768k
(--) SAVAGE(0): Detected current MCLK value of 14.318 MHz
(II) SAVAGE(0): Monitor0: Using hsync range of 20.00-30.00 kHz
(II) SAVAGE(0): Monitor0: Using vrefresh range of 35.00-105.00 Hz
(II) SAVAGE(0): Clock range: 10.00 to 220.00 MHz
(II) SAVAGE(0): Not using default mode "640x350" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x175" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x400" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "720x400" (hsync out of range)
(II) SAVAGE(0): Not using default mode "360x200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x240" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x240" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x240" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "320x240" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "400x300" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "512x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (hsync out of range)
(II) SAVAGE(0): Not using default mode "576x432" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x960" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x480" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1280x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "640x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1200" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "800x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (hsync out of range)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1792x1344" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "896x672" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (hsync out of range)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1856x1392" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "928x696" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "832x624" (hsync out of range)
(II) SAVAGE(0): Not using default mode "416x312" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "576x384" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1152x864" (hsync out of range)
(II) SAVAGE(0): Not using default mode "576x432" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1400x1050" (hsync out of range)
(II) SAVAGE(0): Not using default mode "700x525" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1600x1024" (hsync out of range)
(II) SAVAGE(0): Not using default mode "800x512" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1200" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x600" (hsync out of range)
(II) SAVAGE(0): Not using default mode "1920x1440" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "960x720" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(II) SAVAGE(0): Not using default mode "2048x1536" (bad mode clock/interlace/doublescan)
(II) SAVAGE(0): Not using default mode "1024x768" (hsync out of range)
(WW) SAVAGE(0): Mode pool is empty
(EE) SAVAGE(0): No valid modes found
(II) UnloadModule: "savage"
(II) UnloadModule: "vbe"
(II) Unloading /usr/X11R6/lib/modules/libvbe.a
(II) UnloadModule: "int10"
(II) Unloading /usr/X11R6/lib/modules/linux/libint10.a
(II) UnloadModule: "vgahw"
(II) Unloading /usr/X11R6/lib/modules/libvgahw.a
(EE) Screen(s) found, but none have a usable configuration.

Fatal server error:
no screens found

If you encounter a server crash, please report the problem by filing a bug
report in the XFree86.org bugzilla at and/or Red Hat
bugzilla at When filing your report, it
is very important that you explain your problem in as much detail as possible,
and include a complete description on how to reproduce the problem. After
submitting the bug report, attach the following files as uncompressed
individual file attachments using the bugzilla file attachment feature:
- X server log file: /var/log/XFree86.0.log
- X server config file: /etc/X11/XF86Config
- Kernel log file: /var/log/messages



Thanks
Prasath C

Tuttle 05-06-2005 07:26 AM

Try logging in in text mode as root, then run this:
Code:

X -configure
As you can see it starts (or tries to start) a screen with a fully automatic configuration specifically for your card. After it has finnished, test it using the suggested method (see text on-screen after running command) ie:
Code:

X -config=/root/xorg.conf.new
or similar (can't remember exactly what it says!). Kill the newly started screen with "ctrl+alt+backspace". If all seems ok, copy the new config to /etc/X11 directory as "xorg.conf" then start tweaking it for your own preferences, ie. resolution, refresh rate, mouse and keyboard settings etc.

prasath 05-06-2005 07:53 AM

Tuttly,
I have tried with redhat-config-xfree86,
#redhat-config-Xfree86 I'm able to found something going around in the background, but not able to identify visually. After sometime i'm getting the following error messages.

OUT OF FREQUENCY
HF=23.9 KHZ
VF=38.0 HZ
OPERATING FREQUENCY
HF=30-54.KHZ
VF= 50-120KHZ

I have tried changing the refresh rate and resoluation, but no hope, any help here?

Tuttle 05-06-2005 08:17 AM

I see you are using Xfree86, not Xorg am I right? If so, I haven't been using xf86 for ages now and can't remember how to do the thing I suggested, sorry.
I think you need to find out the vertical and horizontal sync range details of your monitor. Once you have the relevant info, try manually putting the details into your /etc/X11/Xfree86.conf (again, can't remember exact names!) under the "Monitor" section like this:
Code:

Section "Monitor"
...
...
...
...
        HorizSync      27 - 115
        VertRefresh    80 - 160
        Option          "DPMS"
EndSection

or similar.
Please post the contents of your monitor and device section if what I say seems wrong to you.

prasath 05-06-2005 08:35 AM

Pls find my Xfree86 config fille.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection

Section "Files"
# RgbPath is the location of the RGB database. Note, this is the name of the
# file minus the extension (like ".txt" or ".db"). There is normally
# no need to change the default.

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.

RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection

Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection

Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"

# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"

# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults). For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier "DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "DDCPROBED"
DisplaySize 280 210
HorizSync 20.0 - 30.0
VertRefresh 35.0 - 105.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "savage"
VendorName "Videocard vendor"
BoardName "S3 ProSavage KM133"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

Tuttle 05-06-2005 09:17 AM

Quote:

Originally posted by prasath
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "DDCPROBED"
DisplaySize 280 210
HorizSync 20.0 - 30.0
VertRefresh 35.0 - 105.0
Option "dpms"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "savage"
VendorName "Videocard vendor"
BoardName "S3 ProSavage KM133"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "640x480"
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

It seems your horizontal sync range is too low for the graphics card. Try:
Code:

Section "Monitor"
        Identifier  "Monitor0"
        VendorName  "Monitor Vendor"
        ModelName    "DDCPROBED"
        DisplaySize  280        210
        HorizSync    20.0 - 60.0
        VertRefresh  35.0 - 105.0
        Option            "dpms"
EndSection

If that doesn't work, try different values, be careful as damage can result if the monitor is unable to cope (although I have never caused damage myself by doing this). Also, look into what "DisplaySize" does as I am not familiar with that. Your modes are limited too. Try this:
Code:

Section "Screen"
        Identifier "Screen0"
        Device    "Videocard0"
        Monitor    "Monitor0"
        DefaultDepth    24
        SubSection "Display"
                Depth    24
                Modes    "1024x768" "800x600" "640x480"
        EndSubSection
EndSection

assuming the horizontal sync thing gets you running first, and only if your monitor supports it.

prasath 05-06-2005 11:10 AM

Thanks for your reply. I'll try and let you know the status. :-)

joemullins 05-11-2005 12:39 PM

Hi , im having a similar problem.... any joy?


All times are GMT -5. The time now is 10:24 PM.