The NanoPi 2 Fire is a high performance ARM Board developed by FriendlyARM for Hobbysts, Makers and Hackers for IOT projects.
It features Samsung's Cortex-A9 Quad Core S5P4418@1.4GHz SoC and 1G 32bit DDR3 RAM. It has a Gbps Ethernet port. It boots Android and Debian from a TF card. It integrates an HDMI and LCD interface. Its adoption of the Raspberry Pi's GPIO pin header makes it compatible with both Raspberry Pi's external GPIO modules and Arduino's shield boards. Its PCB dimension is 75 x 40 mm.
Features
CPU: S5P4418, 1.4GHz
RAM: 1GB DDR3
Connectivity: Gbps Ethernet port
PMU Power Management: AXP228, support software power-off, sleep and wakeup functions
USB 2.0 Type A x 1
Debug Serial Port/UART0 x 1
microSD Slot x 1
microUSB x 1: for data transmission and power input
LCD Interface: 0.5 mm pitch SMT FPC seat, for full-color LCD (RGB: 8-8-8)
HDMI: HDMI 1.4A, Type-A, 1080P60
DVP Camera Interface: 0.5mm spacing FPC socket. It includes ITU-R BT 601/656 8-bit, I2C and IO
GPIO: 2.54mm spacing 40pin, compatible with Raspberry Pi's GPIO. It includes UART, SPI, I2C, PWM, IO etc
Button: Power Button x 1, Reset Button x 1
LED: LED for Power Indication x 1, System LED x 1
PCB Dimension: 75 x 40mm
Power: DC 5V/2A
OS: Android, Debian
The board support Android and Debian, and you can find hardware documentation on FriendlyARM’s Wiki (in construction), and software on their Github account. The Wiki should eventually get some software documentation and links to firmware images, just like for NanoPi 2 Wiki.
All our 4418 based boards run at relatively high frequency with a 3.3V power supply. This situation often introduces overheat issues, to relieve the issues for
customers who use the boards in industrial applications we strongly recommend mounting a heat sink on these boards.
NanoPi 2 Frie's 3D Printed Housing
FriendlyARM designs 3D printed housing for NanoPi 2 Fire,and you can download the 3D printed file via thingiver:
http://www.thingiverse.com/thing:1592203
NanoPi 2 Fire more OS support
NanoPi 2 Fire supports more OS such as UbuntuCore with Qt 、Android5.1、Debian8.1,and more other OS by enthusiasts.
The other OS include Kali,Ubuntu-Mate,Android-Remixos.
More Course
FriendlyARM has done much more course for NanoPi 2 Fire users,the course introduces how to use NanoPi 2 Fire gpio 、spi、i2c ,et.
There are some course :
* Matrix Modules & Wiki Sites:
** [
http://wiki.friendlyarm.com/wiki/ind...atrix_-_Button Button]
** [
http://wiki.friendlyarm.com/wiki/index.php/Matrix_-_LED LED]
** [
http://wiki.friendlyarm.com/wiki/ind...ital_Converter A/D Converter]
** [
http://wiki.friendlyarm.com/wiki/ind...Matrix_-_Relay Relay]
** [
http://wiki.friendlyarm.com/wiki/ind..._Accelerometer 3-Axis Digital Accelerometer]
** [
http://wiki.friendlyarm.com/wiki/ind...igital_Compass 3-Axis Digital Compass]
** [
http://wiki.friendlyarm.com/wiki/ind...erature_Sensor Temperature Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...umidity_Sensor Temperature & Humidity Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...atrix_-_Buzzer Buzzer]
** [
http://wiki.friendlyarm.com/wiki/ind...rix_-_Joystick Joystick]
** [
http://wiki.friendlyarm.com/wiki/ind...LCD1602_Keypad I2C(PCF8574)+LCD1602]
** [
http://wiki.friendlyarm.com/wiki/ind...-_Sound_Sensor Sound Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...rasonic_Ranger Ultrasonic Ranger]
** [
http://wiki.friendlyarm.com/wiki/index.php/Matrix_-_GPS GPS]
** [
http://wiki.friendlyarm.com/wiki/ind..._-_Compact_Kit Matrix - Compact Kit]
** [
http://wiki.friendlyarm.com/wiki/ind..._-_Fire_Sensor Fire Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...trix_-_CAM500A CAM500A Camera]
** [
http://wiki.friendlyarm.com/wiki/ind...Rolling_Switch BAll Rolling Switch]
** [
http://wiki.friendlyarm.com/wiki/ind...78_SPI_Key_TFT 2'8 SPI Key TFT 2.8" SPI LCD]
** [
http://wiki.friendlyarm.com/wiki/ind...x_-_IR_Counter IR Counter]
** [
http://wiki.friendlyarm.com/wiki/ind..._-_IR_Receiver IR Receiver]
** [
http://wiki.friendlyarm.com/wiki/ind...N_Motor_Driver L298N Motor Driver]
** [
http://wiki.friendlyarm.com/wiki/ind...Q-2_Gas_Sensor MQ-2 Gas Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...Q-3_Gas_Sensor MQ-3 Gas Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...e_Touch_Sensor One_Touch_Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind..._Photoresistor _Photoresistor]
** [
http://wiki.friendlyarm.com/wiki/ind..._Potentiometer _Potentiometer]
** [
http://wiki.friendlyarm.com/wiki/ind...erature_Sensor Pressure & Temperature Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...trix_-_RGB_LED RGB LED]
** [
http://wiki.friendlyarm.com/wiki/index.php/Matrix_-_RTC RTC]
** [
http://wiki.friendlyarm.com/wiki/ind...Rotary_Encoder Rotary Encoder]
** [
http://wiki.friendlyarm.com/wiki/ind...oisture_Sensor Soil Moisture Sensor]
** [
http://wiki.friendlyarm.com/wiki/ind...x_-_Thermistor Thermistor]
** [
http://wiki.friendlyarm.com/wiki/ind...rix_-_USB_WiFi USB WiFi]
** [
http://wiki.friendlyarm.com/wiki/ind...-_Water_Sensor Water Sensor]
==Source Code and Image Files Download Links==
* Image File: [
https://www.mediafire.com/folder/ilk.../NanoPi2Board]
* Source Code: [
https://github.com/friendlyarm]
==Resources==
* Schematic ([
http://wiki.friendlyarm.com/wiki/ima..._Schematic.pdf NanoPi2_Fire_1512B_Schematic.pdf])
* Dimensions ([
http://wiki.friendlyarm.com/wiki/ima...s%28dxf%29.zip NanoPi2_Fire_1512B_Dimensions(dxf).zip])
* S5P4418 Datasheet ([
http://wiki.friendlyarm.com/wiki/ima...SOC_DS_0.1.pdf S5P4418_Datasheet_0.1.pdf])