LinuxQuestions.org
Register a domain and help support LQ
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Hardware > Linux - Embedded & Single-board computer
User Name
Password
Linux - Embedded & Single-board computer This forum is for the discussion of Linux on both embedded devices and single-board computers (such as the Raspberry Pi, BeagleBoard and PandaBoard). Discussions involving Arduino, plug computers and other micro-controller like devices are also welcome.

Notices

Reply
 
Search this Thread
Old 10-29-2010, 02:09 PM   #1
toredo
Member
 
Registered: Feb 2009
Posts: 83

Rep: Reputation: 25
Netgear WN111v2 on SAM9-L9260


Hello,

I have a wireless-stick, which i wanna use with my linux-system. the hardware is based on a olimex sam9-l9260. there runs a debian 5.0.

I searched a compatible usb-wireless-stick. so i bought Netgear WN111v2 which uses the ar9170 driver.

i compiled the module for my system. and i installed the firmware to /lib/firmware. but it dont really works. a few weeks ago i already asked somethign about a wireless-stick... but here's another problem.

if i connect the stick to the system, i see this messages:
Code:
usb 1-1.2: new full speed USB device using at91_ohci and address 5
usb 1-1.2: New USB device found, idVendor=0846, idProduct=9001
usb 1-1.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-1.2: Product: USB2.0 WLAN
usb 1-1.2: Manufacturer: ATHER
usb 1-1.2: SerialNumber: 12345
usb 1-1.2: reset full speed USB device using at91_ohci and address 5
usb 1-1.2: firmware: requesting ar9170.fw
usb 1-1.2: USB setup failed (-32).
USB setup failed? i searched and searched and searched... but i didn't find an answer to this error-message...

has anyone an idea what's wrong? or is there somewhere a log, which contains a better message?

thanks,

best regards
toredo

-edit-

So i tried something new. i think it's stupid and it didn't work...

here is the code, which generates the error:
http://lxr.free-electrons.com/source...b.c?a=arm#L663

i defined error as 0, so i forced it... but it didn't work. i think it's a stupid idea...

need help;-)

-edit2-
i solved the problem:
i used a clean 2.6.34.7-kernel. i changed to the patched 2.6.31-rc3-kernel from olimex. now it works.

thanks.

Last edited by toredo; 10-30-2010 at 05:48 AM. Reason: solved
 
Old 11-04-2010, 10:38 AM   #2
archtoad6
Senior Member
 
Registered: Oct 2004
Location: Houston, TX (usa)
Distribution: MEPIS, Debian, Knoppix,
Posts: 4,727
Blog Entries: 15

Rep: Reputation: 231Reputation: 231Reputation: 231
Thanks for posting the solution. That's the LQ spirit.

A suggestion for the future: If you answer your own question, put the solution in a separate post; this does 2 good things:
  • It generates e-mail to anyone who subscribed to either the thread or the forum.
  • It avoids the creation of oxymoronic 0-reply solved threads.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Replacing Kernel on SAM9-L9260 toredo Linux - Kernel 2 05-30-2010 11:47 PM
Problems installing Netgear WN111v2 (AR9100ap chip) on Fedora 12 web server SeraphimNL Linux - Networking 4 04-19-2010 04:50 PM
Sam9-l9260 toredo Linux - Embedded & Single-board computer 0 08-26-2009 04:59 PM
SAM9-L9260 TCP over USB toredo Linux - Embedded & Single-board computer 2 05-09-2009 11:05 AM
Olimex SAM9-L9260 building kernel problem oldreith Linux - Kernel 1 04-12-2009 02:45 PM


All times are GMT -5. The time now is 02:16 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration