Galileo Gen 1 firmware upgrade
Hi,
I see a strange error message on the serial terminal when trying to upgrade firmware from version 742 to 1.0.4. on the Galileo Gen 1
irq 40: nobody cared
Basically, I run the firmware upgrade tool from Linux, then I see some files being copied. Then this IRQ occurs, and the firmware upgrade on the host hangs. When I reboot the board, I see again version 742.
Here is the screen log:
6 BPS:[ 134.14978omm: clloade 3.8.7-yoc150096] Cal6] [<c107edrt_bad_irq+096] [<e077e_udc_isr+0x15d/0x1028 [40>] note_i60/0x1a0
55/0x130
[6] [<c107d6ercpu+0x70/34.150096] irq_event+0x 134.150096irq_event+06] [<c107f2q+0x70/0x70
e8bf1>] ? co6 ? do_IRQace_hardirq0x9a/0x170
[ 134.r_del+0xb/0xc1035ed5>] rq+0x55/0x130
[ 134.150096] [<c134.150096] <IRQ> [<c10360f5>] ? irq_exit+0RQ+0x43/0xb050096] [<c1trace_hardirqs_on_calle50096] [<c1x36
[ 134>] pch_udc_i]
[ 134.1bling IRQ #40
Byte 9] irq 40: nobody cared (try booting with the "irqpoll" option)
[ 134.150096] Pid: 875, cr Tainted: G W to-standard #1
[ 134.l Trace:
[ 134.1500974>] __repox24/0xc0
[ 134.15004ad>] ? pchpch_udc]
Anyone has an idea what goes wrong?
Is there another way to do the firmware upgrade?
|