LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions
User Name
Password
Linux - Distributions This forum is for Distribution specific questions.
Red Hat, Slackware, Debian, Novell, LFS, Mandriva, Ubuntu, Fedora - the list goes on and on... Note: An (*) indicates there is no official participation from that distribution here at LQ.

Notices

Reply
 
Search this Thread
Old 09-14-2004, 11:15 AM   #1
os2
Member
 
Registered: Dec 2003
Location: Canada
Distribution: Suse 10
Posts: 206

Rep: Reputation: 30
many errors in var/log...


hi

i use suse 9.1 i have many warning and error when i boot...
i can see it in /var/log/message


WARNING in Function ACPI_Interface; line 26: could not set battery alarm, you may need to force polling mode.

linux [powersaved][2331]: resmgr: server response code 200
linux [powersave_proxy][2407]: WARNING: hdparm returned error 5

linux kernel: Symbols match kernel version 2.6.5.
linux kernel: No module symbols loaded - kernel modules not enabled.

linux kernel: hda: drive_cmd: status=0x51 { DriveReady SeekComplete Error }
linux kernel: hda: drive_cmd: error=0x04 { DriveStatusError }

via_ircc: unsupported module, tainting kernel.

linux ifup: No configuration found for sit0

linux kernel: sym0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
linux kernel: Non-volatile memory driver v1.2
linux kernel: end_request: I/O error, dev fd0, sector 0
linux kernel: end_request: I/O error, dev fd0, sector 0
linux kernel: sym0: SCSI parity error detected: SCR1=132 DBC=2440a04 SBCL=0

linux /etc/hotplug/block.agent[3357]: grep: /sys/class/scsi_host/ide1/proc_name: No such file or directory
linux /etc/hotplug/block.agent[3357]: grep: /sys/class/scsi_host/ide1/proc_name: No such file or directory

linux /etc/hotplug/block.agent[3357]: new block device /block/hdc
linux kernel: sym0: SCSI parity error detected: SCR1=132 DBC=2440a04 SBCL=0
linux kernel: eth0: no IPv6 routers present
linux kernel: sym0: SCSI parity error detected: SCR1=132 DBC=2440a04 SBCL=0
linux kernel: sym0:0: ERROR (81:0) (a-0-0) (f/9d/0) @ (mem d136a328:ffffffff).
linux kernel: sym0: regdump: da 00 40 9d 47 0f 00 0e 00 0a 80 00 80 00 0f 0a 30 30 71 1f 02 ff ff ff.
linux kernel: sym0: SCSI BUS reset detected.
linux kernel: sym0: SCSI BUS has been reset.
linux kernel: st: Version 20040318, fixed bufsize 32768, s/g segs 256
linux kernel: sym0:4: FAST-20 SCSI 20.0 MB/s ST (50.0 ns, offset 16)
linux kernel: sr0: scsi-1 drive
linux kernel: Attached scsi CD-ROM sr0 at scsi0, channel 0, id 4, lun 0
linux kernel: sym0:6: FAST-10 SCSI 10.0 MB/s ST (100.0 ns, offset 15)
linux kernel: sr1: scsi-1 drive
linux kernel: Attached scsi CD-ROM sr1 at scsi0, channel 0, id 6, lun 0
linux kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0,type 0
linux kernel: Attached scsi generic sg1 at scsi0, channel 0, id 4, lun 0,type 5
linux kernel: Attached scsi generic sg2 at scsi0, channel 0, id 6, lun 0,type 5
linux kernel: BIOS EDD facility v0.13 2004-Mar-09, 2 devices found
linux /etc/hotplug/block.agent[3498]: 0:0:4:0: sg_io failed status 0x0 0x0 0x0 0x2

linux /etc/hotplug/block.agent[3498]: 0:0:4:0: sense key 0x5 ASC 0x24 ASCQ 0x0
linux /etc/hotplug/scsi_generic.agent[3587]: 0:0:4:0: sg_io failed status 0x0 0x0 0x0 0x2
linux /etc/hotplug/scsi_generic.agent[3587]: 0:0:4:0: sense key 0x5 ASC 0x24 ASCQ 0x0
linux /etc/hotplug/block.agent[3498]: new block device /block/sr0
linux kernel: sym0: SCSI parity error detected: SCR1=132 DBC=50000000 SBCL=0
linux kernel: sym0:4:0: ABORT operation started.
linux kernel: sym0:4:0: ABORT operation timed-out.
linux kernel: sym0:6:0: ABORT operation started.
linux kernel: sym0:6:0: ABORT operation timed-out.
linux kernel: sym0:4:0: DEVICE RESET operation started.
linux kernel: sym0:4:0: DEVICE RESET operation timed-out.
linux kernel: sym0:6:0: DEVICE RESET operation started.
linux kernel: sym0:6:0: DEVICE RESET operation timed-out.
linux kernel: sym0:4:0: BUS RESET operation started.
linux kernel: sym0: SCSI BUS reset detected.
linux kernel: sym0: SCSI BUS has been reset.
linux kernel: sym0:4:0: BUS RESET operation complete.

any idea to resolve any of theses problem?

thanks
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Plug-in usb hard drive gives errors in /var/log/messeges and dmesg jasone Linux - Hardware 12 11-18-2005 12:19 AM
STARTTLS errors in /var/log/maillog joe.biz Linux - Software 1 10-26-2005 04:18 PM
error: stat of /var/log/ppp/connect-errors failed: No such file or directory Niceman2005 Linux - Newbie 0 01-20-2005 12:29 AM
YUM causing strange /var/log/security errors???? zepplin611 Linux - Security 4 07-20-2004 06:10 PM
eth0 will not restart. Errors in /var/log/messages soren625 Linux - Networking 8 06-05-2004 12:43 PM


All times are GMT -5. The time now is 05:44 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration