Iam using two USB dongles in my desktop. I used to dial these dongles from ifcfg-ppp0 and ifcfg-ppp1.
Both are working fine but when we reboot the machine the USB port mapping modified for both dongles so that i got Authentication failure. But it is keep trying dial and not terminating...
How terminate the dialing if it got Authentication failure.
My ifcfg-ppp0 file
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Modem Type = Analog Modem
Phone = #777
ISDN = 0
Init1 = ATZ
Stupid Mode = 1
Username = email@example.com
Password = password
Modem = /dev/ttyUSB0
Baud = 9600
So can we define the dial attempts to 3 and can we terminate if it got authentication failure