Hello,

My usb tv tuner card gets recognised when cat /proc/bus/usb/devices
as,


T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=6000 ProdID=0001 Rev= 0.01
S: Manufacturer=Trident
S: Product=TVBOX
S: SerialNumber=2004090820040908
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS= 0 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS=3072 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I: If#= 0 Alt= 2 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=ff Driver=(none)
E: Ad=81(I) Atr=01(Isoc) MxPS=3072 Ivl=125us
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms


also I get messages in /var/lock/messages as,


Jun 8 16:02:04 c1 kernel: usb 1-4: new high speed USB device using ehci_hcd and address 7
Jun 8 16:02:04 c1 kernel: usb 1-4: New USB device found, idVendor=6000, idProduct=0001
Jun 8 16:02:04 c1 kernel: usb 1-4: New USB device strings: Mfr=16, Product=32, SerialNumber=64
Jun 8 16:02:04 c1 kernel: usb 1-4: Product: TVBOX
Jun 8 16:02:04 c1 kernel: usb 1-4: Manufacturer: Trident
Jun 8 16:02:04 c1 kernel: usb 1-4: SerialNumber: 2004090820040908
Jun 8 16:02:04 c1 kernel: usb 1-4: configuration #1 chosen from 1 choice


So, what should be my next step to get it work?

Thank you.

I believe this is the Linux TV wiki page for your card's chipset: http://www.linuxtv.org/wiki/index.php/Trident_TM6000

1 members found this post helpful.

rjwilmsi, thanks a lot.

no luck I tried many things but still not getting tv device in /dev