LinuxQuestions.org
Review your favorite Linux distribution.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Desktop
User Name
Password
Linux - Desktop This forum is for the discussion of all Linux Software used in a desktop context.

Notices

Reply
 
LinkBack Search this Thread
Old 10-27-2008, 04:38 PM   #1
Gralgrathor
LQ Newbie
 
Registered: Oct 2008
Posts: 7

Rep: Reputation: 0
No sound with Hauppauge WinTV-HVR1110 DVB-T/Hybrid


Hi!

I have recently installed a
Code:
Hauppauge WinTV-HVR1110 DVB-T/Hybrid
in my system. I'm not getting any sound.

It has only a line-in connector, no audio out, unless I splice it out of the s-video output. There's no internal connector either: it's supposed to work by just plugging it into the PCI slot.

I've downloaded and compiled the latest drivers from IVTV.


It's a Debian box,
Code:
Linux lnhouse 2.6.26-1-686 #1 SMP Thu Oct 9 15:18:09 UTC 2008 i686 GNU/Linux
At startup, it goes:
Code:
[   11.653367] saa7130/34: v4l2 driver version 0.2.14 loaded
[   11.653367] saa7133[0]: found at 0000:04:00.0, rev: 209, irq: 16, latency: 64, mmio: 0xfebff800
[   11.653367] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
[   11.653367] saa7133[0]: board init: gpio is 6400000
[   11.789807] ir-kbd-i2c: HVR 1110 detected at i2c-1/1-0071/ir0 [saa7133[0]]
[   11.844837] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[   11.844847] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
[   11.844855] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
[   11.844864] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[   11.844872] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
[   11.844880] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.844888] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.844896] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.844904] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 ac e3 38 f0 73 05 29 00
[   11.844912] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
[   11.844920] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
[   11.844928] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 77 00 00 00 00 00 00 00 00 00
[   11.844936] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.844944] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.844952] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   11.844960] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[   12.039499] tuner' 1-004b: chip found @ 0x96 (saa7133[0])
[   12.051497] tveeprom 1-0050: Hauppauge model 67019, rev B4B4, serial# 3728300
[   12.051497] tveeprom 1-0050: MAC address is 00-0D-FE-38-E3-AC
[   12.051497] tveeprom 1-0050: tuner model is Philips 8275A (idx 114, type 4)
[   12.051497] tveeprom 1-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
[   12.051497] tveeprom 1-0050: audio processor is SAA7131 (idx 41)
[   12.051497] tveeprom 1-0050: decoder processor is SAA7131 (idx 35)
[   12.051497] tveeprom 1-0050: has radio, has IR receiver, has IR transmitter
[   12.051497] saa7133[0]: hauppauge eeprom: model=67019
[   12.136369] tda829x 1-004b: setting tuner address to 61
[   12.220643] tda829x 1-004b: type set to tda8290+75a
[   16.215455] saa7133[0]: registered device video0 [v4l2]
[   16.215455] saa7133[0]: registered device vbi0
[   16.215455] saa7133[0]: registered device radio0
[   16.441508] DVB: registering new adapter (saa7133[0])
[   16.441514] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[   16.517435] tda1004x: setting up plls for 48MHz sampling clock
[   18.863774] tda1004x: timeout waiting for DSP ready
[   18.910683] tda1004x: found firmware revision 0 -- invalid
[   18.910683] tda1004x: trying to boot from eeprom
[   21.412985] tda1004x: timeout waiting for DSP ready
[   21.463661] tda1004x: found firmware revision 0 -- invalid
[   21.463663] tda1004x: waiting for firmware upload...
[   21.463666] firmware: requesting dvb-fe-tda10046.fw
[   34.609512] tda1004x: found firmware revision 20 -- ok
I'm pretty new at this, and above checks and actions have exhausted my limited expertise.

Does anybody here know what else I can try to get some sound out of this card?

Thank you.
 
Old 10-29-2008, 09:06 PM   #2
newtovanilla
Member
 
Registered: Apr 2008
Posts: 267

Rep: Reputation: 30
My sister keeps watching television while I am trying to do my art homework! I wish that I could figure out how to keep the sound like your debian system!

Isn't the card supposed to work with your soundcard? Does sound work on your system? I have not used debian. Check your sound mixer and see what is enabled. Can you play sounds on your computer?
 
Old 10-30-2008, 04:38 AM   #3
Gralgrathor
LQ Newbie
 
Registered: Oct 2008
Posts: 7

Original Poster
Rep: Reputation: 0
Quote:
Originally Posted by newtovanilla View Post
Isn't the card supposed to work with your soundcard?
It is. It's supposed to do everything after I plug it in and install the drivers. I suppose either there's something wrong with the driver modules or their configuration, or I'm somehow missing something needed to enable sound on the card.

Quote:
Originally Posted by newtovanilla View Post
Does sound work on your system?
Sound works just fine; I use the system as a media center, for watching video and listening to music. It's just the tv-card that doesn't produce any sound.

Quote:
Originally Posted by newtovanilla View Post
Check your sound mixer and see what is enabled.
All inputs are enabled, all outputs as well. I've got all volumes amped up to the max. Not a peep out of the tv-card, though.
 
Old 01-23-2009, 05:16 AM   #4
dolphans1
Senior Member
 
Registered: Jun 2003
Location: LoneStar
Distribution: Mandriva & Ubuntu
Posts: 1,025

Rep: Reputation: 34
Have you resolved this issue.....?

I was having one heck of a time configuring my Hauppauge Wintv HVR 1600 TVTunner, only to find out that this model uses the cx18 which is what kdetv uses, however kdetv cannot capture mpeg2 signal, so I have to use xine or Mplayer to view a picture, but I get no sound off my line-in cable coaxial cable that is set to channel 3, however a do get sound off the over the air analog channels that somehow I still pick up through that same coaxial wire, however, the picture is grainy.

I am told TV-Time uses the cx88 module, and that is why Hauppage will not work on it.

Did you ever resolve your sound issue, I noticed you posted in October of 2008 and received no reply..?

My OS is Mandriva-2009.

d-1
 
Old 04-28-2009, 04:35 PM   #5
Zoutmax
LQ Newbie
 
Registered: Apr 2009
Posts: 5
Blog Entries: 1

Rep: Reputation: 0
Unhappy No sound Hauppauge WinTV-HVR1110 DVB-T/Hybrid on Ubuntu 9.0.4

Hi,

I am posting here because desperate to make working my :

Code:
Hauppauge WinTV-HVR1110 DVB-T/Hybrid
From lspci output :

Code:
Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1)
I am running Ubuntu 9.0.4 jaunty:

Code:
Ubuntu 9.0.4 Linux 2.6.28-11-generic
I tried with the build in drivers from the Ubuntu 9.0.4 install disk,
and with the drivers that i compiled from Linux TV org (V4L-DVB).

Both give me the same result : No TV or radio tuner sound output

The sound is working fine on this system only this TV card does not produce any...

I checked the volume parameters tried with different sound servers (alsa, oss, etc..) no results.

I assume that the sound card i am using is OK, details from lspci :

Code:
Multimedia audio controller: Intel Corporation 82801AA AC'97 Audio Controller (rev 02)
Working on the TV card tested with TV Time and K Radio :

Video (the video output is ok, i can watch TV on the different channels)
Video Channel Seeking (the card detect all my TV channels but no sound)
Radio Channel Seeking (the card detect all my Radio channels but no sound)
Remote Control Lirc (Infrared remote control plugged in the TV card working fine)

The only problem is that i can't get any sound output from this TV card, i checked the modules :

Code:
lsmod
Module                  Size  Used by
binfmt_misc            16776  1
radeon                342816  2
drm                    96296  3 radeon
bridge                 56340  0
stp                    10500  1 bridge
bnep                   20224  2
ivtv                  150436  0
i2c_algo_bit           14084  1 ivtv
cx2341x                22020  1 ivtv
lirc_dev               19892  0
input_polldev          11912  0
video                  25360  0
output                 11008  1 video
lp                     17156  0
tda1004x               24068  1
saa7134_dvb            30476  0
videobuf_dvb           15108  1 saa7134_dvb
dvb_core               93312  1 videobuf_dvb
saa7134_alsa           20000  0
ir_kbd_i2c             16272  0
tda827x                18052  2
ppdev                  15620  0
snd_intel8x0           37532  3
snd_ac97_codec        112292  1 snd_intel8x0
ac97_bus                9856  1 snd_ac97_codec
snd_pcm_oss            46336  0
snd_mixer_oss          22656  1 snd_pcm_oss
snd_pcm                82948  4 saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
tda8290                21000  1
snd_seq_dummy          10756  0
snd_seq_oss            37760  0
tuner                  30984  1
snd_seq_midi           14336  0
snd_rawmidi            29696  1 snd_seq_midi
snd_seq_midi_event     15104  2 snd_seq_oss,snd_seq_midi
snd_seq                56880  6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer              29704  2 snd_pcm,snd_seq
snd_seq_device         14988  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
saa7134               160716  2 saa7134_dvb,saa7134_alsa
ir_common              56068  2 ir_kbd_i2c,saa7134
v4l2_common            23808  4 ivtv,cx2341x,tuner,saa7134
snd                    62628  17 saa7134_alsa,snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
videodev               44832  4 ivtv,tuner,saa7134,v4l2_common
v4l1_compat            21764  1 videodev
iTCO_wdt               19108  0
iTCO_vendor_support    11652  1 iTCO_wdt
psmouse                61972  0
videobuf_dma_sg        20484  3 saa7134_dvb,saa7134_alsa,saa7134
pcspkr                 10496  0
soundcore              15200  1 snd
snd_page_alloc         16904  2 snd_intel8x0,snd_pcm
serio_raw              13316  0
intel_agp              34108  1
videobuf_core          26244  3 videobuf_dvb,saa7134,videobuf_dma_sg
tveeprom               20228  2 ivtv,saa7134
agpgart                42696  2 drm,intel_agp
shpchp                 40212  0
parport_pc             40100  1
parport                42220  3 lp,ppdev,parport_pc
usbhid                 42336  0
3c59x                  49192  0
mii                    13312  1 3c59x
floppy                 64324  0
fbcon                  46112  0
tileblit               10752  1 fbcon
font                   16384  1 fbcon
bitblit                13824  1 fbcon
softcursor              9984  1 bitblit


They look loaded,then i tried to reroute the sound to alsa by using sox:

Code:
sox -q -c 2 -s -r 32000 -t alsa hw:1 -t alsa -r 32000 hw:0
This is the only way i can get the sound but it implicate starting sox every time i want to use TV or Radio...........

The /var/messages does not show any problems :

Code:
Apr 29 00:53:27 Ubuntu kernel: [   13.200361] Linux video capture interface: v2.00
Apr 29 00:53:27 Ubuntu kernel: [   13.446769] saa7130/34: v4l2 driver version 0.2.15 loaded
Apr 29 00:53:27 Ubuntu kernel: [   13.447106] saa7134 0000:02:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
Apr 29 00:53:27 Ubuntu kernel: [   13.447119] saa7133[0]: found at 0000:02:09.0, rev: 209, irq: 17, latency: 66, mmio: 0x40000000
Apr 29 00:53:27 Ubuntu kernel: [   13.447133] saa7133[0]: subsystem: 0070:6701, board: Hauppauge WinTV-HVR1110 DVB-T/Hybrid [card=104,autodetected]
Apr 29 00:53:27 Ubuntu kernel: [   13.447248] saa7133[0]: board init: gpio is 6400000
Apr 29 00:53:27 Ubuntu kernel: [   13.605809] saa7133[0]: i2c eeprom 00: 70 00 01 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
Apr 29 00:53:27 Ubuntu kernel: [   13.605832] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff
Apr 29 00:53:27 Ubuntu kernel: [   13.605851] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 aa ff ff ff ff
Apr 29 00:53:27 Ubuntu kernel: [   13.605871] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
Apr 29 00:53:27 Ubuntu kernel: [   13.605889] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 32 15 60 ff ff ff ff ff ff
Apr 29 00:53:27 Ubuntu kernel: [   13.605908] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [   13.605927] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [   13.605945] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [   13.605963] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 e0 f1 4f f0 73 05 29 00
Apr 29 00:53:27 Ubuntu kernel: [   13.605983] saa7133[0]: i2c eeprom 90: 84 08 00 06 cb 05 01 00 94 48 89 72 07 70 73 09
Apr 29 00:53:27 Ubuntu kernel: [   13.606002] saa7133[0]: i2c eeprom a0: 23 5f 73 0a fc 72 72 0b 2f 72 0e 01 72 0f 03 72
Apr 29 00:53:27 Ubuntu kernel: [   13.606021] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 79 1e 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [   13.606040] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [   13.606058] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [   13.606076] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [   13.606095] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
Apr 29 00:53:27 Ubuntu kernel: [   13.606123] tveeprom 0-0050: Hauppauge model 67019, rev B4B4, serial# 5239264
Apr 29 00:53:27 Ubuntu kernel: [   13.606131] tveeprom 0-0050: MAC address is 00-0D-FE-4F-F1-E0
Apr 29 00:53:27 Ubuntu kernel: [   13.606137] tveeprom 0-0050: tuner model is Philips 8275A (idx 114, type 4)
Apr 29 00:53:27 Ubuntu kernel: [   13.606145] tveeprom 0-0050: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xfc)
Apr 29 00:53:27 Ubuntu kernel: [   13.606152] tveeprom 0-0050: audio processor is SAA7131 (idx 41)
Apr 29 00:53:27 Ubuntu kernel: [   13.606159] tveeprom 0-0050: decoder processor is SAA7131 (idx 35)
Apr 29 00:53:27 Ubuntu kernel: [   13.606164] tveeprom 0-0050: has radio, has IR receiver, has IR transmitter
Apr 29 00:53:27 Ubuntu kernel: [   13.606170] saa7133[0]: hauppauge eeprom: model=67019
Apr 29 00:53:27 Ubuntu kernel: [   13.885196] tuner 0-004b: chip found @ 0x96 (saa7133[0])
Apr 29 00:53:27 Ubuntu kernel: [   13.964088] tda829x 0-004b: setting tuner address to 61
Apr 29 00:53:27 Ubuntu kernel: [   14.022981] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Apr 29 00:53:27 Ubuntu kernel: [   14.045005] ppdev: user-space parallel port driver
Apr 29 00:53:27 Ubuntu kernel: [   14.096084] tda829x 0-004b: type set to tda8290+75a
Apr 29 00:53:27 Ubuntu kernel: [   14.644024] intel8x0_measure_ac97_clock: measured 55969 usecs
Apr 29 00:53:27 Ubuntu kernel: [   14.644033] intel8x0: clocking to 41146
Apr 29 00:53:27 Ubuntu kernel: [   17.988392] input: HVR 1110 as /devices/virtual/input/input6
Apr 29 00:53:27 Ubuntu kernel: [   17.994320] ir-kbd-i2c: HVR 1110 detected at i2c-0/0-0071/ir0 [saa7133[0]]
Apr 29 00:53:27 Ubuntu kernel: [   18.056323] saa7133[0]: registered device video0 [v4l2]
Apr 29 00:53:27 Ubuntu kernel: [   18.056442] saa7133[0]: registered device vbi0
Apr 29 00:53:27 Ubuntu kernel: [   18.056560] saa7133[0]: registered device radio0
Apr 29 00:53:27 Ubuntu kernel: [   18.086624] saa7134 ALSA driver for DMA sound loaded
Apr 29 00:53:27 Ubuntu kernel: [   18.086695] saa7133[0]/alsa: saa7133[0] at 0x40000000 irq 17 registered as card -2
Apr 29 00:53:27 Ubuntu kernel: [   18.214944] dvb_init() allocating 1 frontend
Apr 29 00:53:27 Ubuntu kernel: [   18.256592] DVB: registering new adapter (saa7133[0])
Apr 29 00:53:27 Ubuntu kernel: [   18.256610] DVB: registering adapter 0 frontend -858993460 (Philips TDA10046H DVB-T)...
Apr 29 00:53:27 Ubuntu kernel: [   18.331451] tda1004x: setting up plls for 48MHz sampling clock
Apr 29 00:53:27 Ubuntu kernel: [   18.497660] lp0: using parport0 (interrupt-driven).
Apr 29 00:53:27 Ubuntu kernel: [   18.621371] tda1004x: found firmware revision 20 -- ok
Apr 29 00:53:28 Ubuntu kernel: [   24.071387] lirc_dev: IR Remote Control driver registered, major 61 
Apr 29 00:53:28 Ubuntu kernel: [   24.183952] ivtv: Start initialization, version 1.4.1
Apr 29 00:53:28 Ubuntu kernel: [   24.186600] ivtv: End initialization

Everything look fine to me but no TV / Radio sound output without using sox.

The Card is not broken because this system has dual boot and when i run windows everything is fine :O)

I believe that the drivers are not able to route the sound from the pci port to the Alsa server.

This TV card does not have any jack sound output, no wire possible between TV card and sound card, sound goes over PCI no choice,which make a latency when using sox with Linux or under Windows i still have the sound not properly synchronized (really minimal but noticeable if you pay attention).

The Wire (Double jack 3.5) connection between TV sound out and the sound card Line In was a better concept as this work fine on my other Pinnacle TV Tuner with no latency but just fine...

Please doe anyone has any idea for get the TV sound from my HVR1110 over pci without using any service like sox ? (not working, big latency)

or maybe working HVR1110 drivers on Ubuntu 9.0.4, or a "wire Patch" who send the TV pci sound output to the sound server will help me...

Thx

Last edited by Zoutmax; 04-29-2009 at 02:36 PM.
 
Old 04-28-2009, 04:45 PM   #6
Zoutmax
LQ Newbie
 
Registered: Apr 2009
Posts: 5
Blog Entries: 1

Rep: Reputation: 0
Not same module HVR 1110 and HVR 1600

Quote:
Originally Posted by dolphans1 View Post
Have you resolved this issue.....?

I was having one heck of a time configuring my Hauppauge Wintv HVR 1600 TVTunner, only to find out that this model uses the cx18 which is what kdetv uses, however kdetv cannot capture mpeg2 signal, so I have to use xine or Mplayer to view a picture, but I get no sound off my line-in cable coaxial cable that is set to channel 3, however a do get sound off the over the air analog channels that somehow I still pick up through that same coaxial wire, however, the picture is grainy.

I am told TV-Time uses the cx88 module, and that is why Hauppage will not work on it.

Did you ever resolve your sound issue, I noticed you posted in October of 2008 and received no reply..?

My OS is Mandriva-2009.

d-1
the post is about hauppauge wintvhvr1110 pci triangular card you are talking wintvhvr1600 square model I believe hvr1110 do not use the module cx88 but instead saa7134.

Last edited by Zoutmax; 04-29-2009 at 02:02 PM.
 
  


Reply

Tags
do, hauppauge, instead, model, module, pci, post, saa7134, sound, square


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Linux and DVB with AverTV Cardbus Hybrid jaws_tas Linux - Hardware 1 01-07-2006 01:44 PM
Hauppauge WinTV Go with Suse 9.2? qwerty Linux - Hardware 4 08-16-2005 03:36 PM
No sound! on: WinTV Hauppauge NTSC 45231 Rev B423 philverb Linux - Hardware 0 08-17-2004 02:39 PM
Hauppauge WinTV - No Sound in Mandrake 9.2 Mankind75 Linux - Hardware 5 06-19-2004 10:32 PM
Hauppauge WinTV won't work?? Yatta Linux - Newbie 2 10-12-2003 10:52 AM


All times are GMT -5. The time now is 05:54 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration