unassailable |
11-25-2012 11:20 AM |
Update #3
Code:
[ 1.164769] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.164775] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.164850] [drm] Driver supports precise vblank timestamp query.
[ 1.165894] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 1.165986] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 1.166091] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 1.258256] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 1.258376] ACPI: Battery Slot [BAT1] (battery present)
[ 1.490211] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
[ 1.726874] fbcon: inteldrmfb (fb0) is primary device
[ 2.040953] Refined TSC clocksource calibration: 2394.560 MHz.
[ 2.040961] Switching to clocksource tsc
[ 2.154885] Console: switching to colour frame buffer device 170x48
[ 2.157347] fb0: inteldrmfb frame buffer device
[ 2.157348] drm: registered panic notifier
[ 2.157508] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 2.183834] acpi device:1c: registered as cooling_device4
[ 2.184020] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1a/LNXVIDEO:00/input/input4
[ 2.184062] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 2.205782] acpi device:4f: registered as cooling_device5
[ 2.205985] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5
[ 2.206022] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.206073] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.207441] brd: module loaded
[ 2.208149] loop: module loaded
[ 2.208320] ahci 0000:00:1f.2: version 3.0
[ 2.208373] ahci 0000:00:1f.2: irq 45 for MSI/MSI-X
[ 2.218676] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x12 impl SATA mode
[ 2.218781] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst
[ 2.218814] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.221247] scsi0 : ahci
[ 2.221334] scsi1 : ahci
[ 2.221411] scsi2 : ahci
[ 2.221490] scsi3 : ahci
[ 2.221568] scsi4 : ahci
[ 2.221646] scsi5 : ahci
[ 2.221812] ata1: DUMMY
[ 2.222714] ata2: SATA max UDMA/133 abar m2048@0xf7a06000 port 0xf7a06180 irq 45
[ 2.223630] ata3: DUMMY
[ 2.224529] ata4: DUMMY
[ 2.225424] ata5: SATA max UDMA/133 abar m2048@0xf7a06000 port 0xf7a06300 irq 45
[ 2.226359] ata6: DUMMY
[ 2.227477] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 2.228421] Copyright(c) 2003-2012 Intel Corporation
[ 2.229458] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 2.230421] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900057a8000
[ 2.231357] iwlwifi 0000:03:00.0: HW Revision ID = 0x34
[ 2.232358] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X
[ 2.232542] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.233460] ehci_hcd: block sizes: qh 112 qtd 96 itd 192 sitd 96
[ 2.233484] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 2.233488] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 2.234425] drivers/usb/core/inode.c: creating file 'devices'
[ 2.234432] drivers/usb/core/inode.c: creating file '001'
[ 2.234473] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 2.235406] ehci_hcd 0000:00:1a.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 2.235410] ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 2.235422] ehci_hcd 0000:00:1a.0: support lpm
[ 2.235432] ehci_hcd 0000:00:1a.0: debug port 2
[ 2.236345] ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.240221] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 2.240223] ehci_hcd 0000:00:1a.0: supports USB remote wakeup
[ 2.240237] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7a08000
[ 2.241145] ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.246613] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 2.247616] usb usb1: default language 0x0409
[ 2.247620] usb usb1: udev 1, busnum 1, minor = 0
[ 2.247622] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.248522] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.249417] usb usb1: Product: EHCI Host Controller
[ 2.250293] usb usb1: Manufacturer: Linux 3.4.9-gentoo ehci_hcd
[ 2.251167] usb usb1: SerialNumber: 0000:00:1a.0
[ 2.252096] usb usb1: usb_probe_device
[ 2.252099] usb usb1: configuration #1 chosen from 1 choice
[ 2.252104] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 2.252135] hub 1-0:1.0: usb_probe_interface
[ 2.252137] hub 1-0:1.0: usb_probe_interface - got id
[ 2.252139] hub 1-0:1.0: USB hub found
[ 2.253001] hub 1-0:1.0: 2 ports detected
[ 2.253856] hub 1-0:1.0: standalone hub
[ 2.253857] hub 1-0:1.0: no power switching (usb 1.0)
[ 2.253858] hub 1-0:1.0: individual port over-current protection
[ 2.253860] hub 1-0:1.0: power on to power good time: 20ms
[ 2.253863] hub 1-0:1.0: local power source is good
[ 2.253865] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 2.253913] drivers/usb/core/inode.c: creating file '001'
[ 2.253951] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 2.253954] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 2.254806] drivers/usb/core/inode.c: creating file '002'
[ 2.254845] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 2.255709] ehci_hcd 0000:00:1d.0: reset hcs_params 0x200002 dbg=2 cc=0 pcc=0 ordered !ppc ports=2
[ 2.255713] ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr
[ 2.255722] ehci_hcd 0000:00:1d.0: support lpm
[ 2.255732] ehci_hcd 0000:00:1d.0: debug port 2
[ 2.256572] ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT
[ 2.260455] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 2.260457] ehci_hcd 0000:00:1d.0: supports USB remote wakeup
[ 2.260470] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7a07000
[ 2.261312] ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN
[ 2.266579] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 2.267520] usb usb2: default language 0x0409
[ 2.267524] usb usb2: udev 1, busnum 2, minor = 128
[ 2.267526] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.268373] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.269222] usb usb2: Product: EHCI Host Controller
[ 2.270048] usb usb2: Manufacturer: Linux 3.4.9-gentoo ehci_hcd
[ 2.270864] usb usb2: SerialNumber: 0000:00:1d.0
[ 2.271727] usb usb2: usb_probe_device
[ 2.271729] usb usb2: configuration #1 chosen from 1 choice
[ 2.271734] usb usb2: adding 2-0:1.0 (config #1, interface 0)
[ 2.271763] hub 2-0:1.0: usb_probe_interface
[ 2.271765] hub 2-0:1.0: usb_probe_interface - got id
[ 2.271766] hub 2-0:1.0: USB hub found
[ 2.272559] hub 2-0:1.0: 2 ports detected
[ 2.273329] hub 2-0:1.0: standalone hub
[ 2.273330] hub 2-0:1.0: no power switching (usb 1.0)
[ 2.273331] hub 2-0:1.0: individual port over-current protection
[ 2.273333] hub 2-0:1.0: power on to power good time: 20ms
[ 2.273336] hub 2-0:1.0: local power source is good
[ 2.273337] hub 2-0:1.0: trying to enable port power on non-switchable hub
[ 2.273383] drivers/usb/core/inode.c: creating file '001'
[ 2.273423] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.274199] ohci_hcd: block sizes: ed 80 td 96
[ 2.274229] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.275058] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.275840] drivers/usb/core/inode.c: creating file '003'
[ 2.275878] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[ 2.382312] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.382317] hub 1-0:1.0: port 1: status 0501 change 0001
[ 2.382332] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT
[ 2.382336] hub 2-0:1.0: port 1: status 0501 change 0001
[ 2.382354] xhci_hcd 0000:04:00.0: supports USB remote wakeup
[ 2.382369] xhci_hcd 0000:04:00.0: irq 19, io mem 0xf7800000
[ 2.383194] xhci_hcd 0000:04:00.0: irq 47 for MSI/MSI-X
[ 2.383199] xhci_hcd 0000:04:00.0: irq 48 for MSI/MSI-X
[ 2.383203] xhci_hcd 0000:04:00.0: irq 49 for MSI/MSI-X
[ 2.383207] xhci_hcd 0000:04:00.0: irq 50 for MSI/MSI-X
[ 2.383211] xhci_hcd 0000:04:00.0: irq 51 for MSI/MSI-X
[ 2.383308] usb usb3: default language 0x0409
[ 2.383312] usb usb3: udev 1, busnum 3, minor = 256
[ 2.383314] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 2.384079] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.384866] usb usb3: Product: xHCI Host Controller
[ 2.385648] usb usb3: Manufacturer: Linux 3.4.9-gentoo xhci_hcd
[ 2.386440] usb usb3: SerialNumber: 0000:04:00.0
[ 2.387300] usb usb3: usb_probe_device
[ 2.387302] usb usb3: configuration #1 chosen from 1 choice
[ 2.387305] xHCI xhci_add_endpoint called for root hub
[ 2.387307] xHCI xhci_check_bandwidth called for root hub
[ 2.387311] usb usb3: adding 3-0:1.0 (config #1, interface 0)
[ 2.387344] hub 3-0:1.0: usb_probe_interface
[ 2.387346] hub 3-0:1.0: usb_probe_interface - got id
[ 2.387347] hub 3-0:1.0: USB hub found
[ 2.388172] hub 3-0:1.0: 2 ports detected
[ 2.388983] hub 3-0:1.0: standalone hub
[ 2.388984] hub 3-0:1.0: individual port power switching
[ 2.388986] hub 3-0:1.0: individual port over-current protection
[ 2.388987] hub 3-0:1.0: Single TT
[ 2.388989] hub 3-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.388990] hub 3-0:1.0: power on to power good time: 20ms
[ 2.388993] hub 3-0:1.0: local power source is good
[ 2.388995] hub 3-0:1.0: enabling power on all ports
[ 2.389050] drivers/usb/core/inode.c: creating file '001'
[ 2.389070] xhci_hcd 0000:04:00.0: xHCI Host Controller
[ 2.389881] drivers/usb/core/inode.c: creating file '004'
[ 2.389921] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 4
[ 2.390735] xhci_hcd 0000:04:00.0: supports USB remote wakeup
[ 2.390750] usb usb4: skipped 1 descriptor after endpoint
[ 2.390752] usb usb4: default language 0x0409
[ 2.390756] usb usb4: udev 1, busnum 4, minor = 384
[ 2.390758] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 2.391579] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 2.392390] usb usb4: Product: xHCI Host Controller
[ 2.393183] usb usb4: Manufacturer: Linux 3.4.9-gentoo xhci_hcd
[ 2.393977] usb usb4: SerialNumber: 0000:04:00.0
[ 2.394817] usb usb4: usb_probe_device
[ 2.394820] usb usb4: configuration #1 chosen from 1 choice
[ 2.394821] xHCI xhci_add_endpoint called for root hub
[ 2.394823] xHCI xhci_check_bandwidth called for root hub
[ 2.394827] usb usb4: adding 4-0:1.0 (config #1, interface 0)
[ 2.394856] hub 4-0:1.0: usb_probe_interface
[ 2.394858] hub 4-0:1.0: usb_probe_interface - got id
[ 2.394859] hub 4-0:1.0: USB hub found
[ 2.395640] hub 4-0:1.0: 2 ports detected
[ 2.396417] hub 4-0:1.0: standalone hub
[ 2.396419] hub 4-0:1.0: individual port power switching
[ 2.396420] hub 4-0:1.0: individual port over-current protection
[ 2.396422] hub 4-0:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.396424] hub 4-0:1.0: power on to power good time: 20ms
[ 2.396426] hub 4-0:1.0: local power source is good
[ 2.396428] hub 4-0:1.0: enabling power on all ports
[ 2.396482] drivers/usb/core/inode.c: creating file '001'
[ 2.405512] usbcore: registered new interface driver usblp
[ 2.406321] usbcore: registered new interface driver cdc_wdm
[ 2.407095] Initializing USB Mass Storage driver...
[ 2.407892] usbcore: registered new interface driver usb-storage
[ 2.408667] USB Mass Storage support registered.
[ 2.409467] usbcore: registered new interface driver libusual
[ 2.410299] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 2.436410] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.437203] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.438077] mousedev: PS/2 mouse device common for all mice
[ 2.439135] rtc_cmos 00:05: RTC can wake from S4
[ 2.440039] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 2.440854] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 2.441680] ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 2.442530] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 2.443503] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 2.444479] usbcore: registered new interface driver btusb
[ 2.445410] cpuidle: using governor ladder
[ 2.446337] cpuidle: using governor menu
[ 2.447218] EFI Variables Facility v0.08 2004-May-17
[ 2.448655] usbcore: registered new interface driver usbhid
[ 2.449516] usbhid: USB HID core driver
[ 2.450899] Netfilter messages via NETLINK v0.30.
[ 2.451767] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 2.452871] ctnetlink v0.93: registering with nfnetlink.
[ 2.453887] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 2.454784] TCP: cubic registered
[ 2.455654] Initializing XFRM netlink socket
[ 2.456883] NET: Registered protocol family 10
[ 2.457899] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 2.458783] IPv6 over IPv4 tunneling driver
[ 2.459725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input6
[ 2.459896] NET: Registered protocol family 17
[ 2.459949] Bluetooth: RFCOMM socket layer initialized
[ 2.459951] Bluetooth: RFCOMM ver 1.11
[ 2.459953] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 2.459955] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 2.460021] Registering the dns_resolver key type
[ 2.460195] PM: Hibernation image not present or could not be loaded.
[ 2.460206] registered taskstats version 1
[ 2.460677] Magic number: 4:327:288
[ 2.460714] tty ttyz2: hash matches
[ 2.460765] tty tty21: hash matches
[ 2.469453] console [netcon0] enabled
[ 2.470333] netconsole: network logging started
[ 2.482333] hub 1-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 2.482341] hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.496259] hub 4-0:1.0: port 1: status 0203 change 0001
[ 2.533273] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.533484] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 2.533488] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.534191] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.539569] ata2.00: ATA-8: WDC WD6400BPVT-80HXZT3, 01.01A01, max UDMA/133
[ 2.540495] ata2.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.541354] ata5.00: ATA-8: WDC WD7500BPVT-22HXZT1, 01.01A01, max UDMA/133
[ 2.542215] ata5.00: 1465149168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.548080] ata5.00: configured for UDMA/133
[ 2.549174] ata2.00: configured for UDMA/133
[ 2.550248] scsi 1:0:0:0: Direct-Access ATA WDC WD6400BPVT-8 01.0 PQ: 0 ANSI: 5
[ 2.551475] sd 1:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[ 2.552340] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 2.552456] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 2.552654] scsi 4:0:0:0: Direct-Access ATA WDC WD7500BPVT-2 01.0 PQ: 0 ANSI: 5
[ 2.552805] sd 4:0:0:0: [sdb] 1465149168 512-byte logical blocks: (750 GB/698 GiB)
[ 2.552807] sd 4:0:0:0: [sdb] 4096-byte physical blocks
[ 2.552856] sd 4:0:0:0: [sdb] Write Protect is off
[ 2.552859] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.552876] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 2.552886] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.559235] sd 1:0:0:0: [sda] Write Protect is off
[ 2.560072] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.560085] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.584169] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.591618] sdb: sdb1
[ 2.592764] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 2.606262] sda: sda1 sda2 sda3
[ 2.607552] sd 1:0:0:0: [sda] Attached SCSI disk
[ 2.609189] Freeing unused kernel memory: 556k freed
[ 2.610219] Write protecting the kernel read-only data: 12288k
[ 2.612858] Freeing unused kernel memory: 652k freed
[ 2.618303] Freeing unused kernel memory: 1744k freed
[ 2.621204] exe used greatest stack depth: 5520 bytes left
[ 2.636332] ehci_hcd 0000:00:1a.0: port 1 high speed
[ 2.636338] ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.699191] ehci_hcd 0000:00:1a.0: set dev address 2 for port 1
[ 2.699203] ehci_hcd 0000:00:1a.0: LPM: no device attached
[ 2.699563] usb 1-1: udev 2, busnum 1, minor = 1
[ 2.699572] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.700477] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.701460] usb 1-1: usb_probe_device
[ 2.701464] usb 1-1: configuration #1 chosen from 1 choice
[ 2.701657] usb 1-1: adding 1-1:1.0 (config #1, interface 0)
[ 2.701885] hub 1-1:1.0: usb_probe_interface
[ 2.701888] hub 1-1:1.0: usb_probe_interface - got id
[ 2.701890] hub 1-1:1.0: USB hub found
[ 2.702891] hub 1-1:1.0: 6 ports detected
[ 2.703755] hub 1-1:1.0: standalone hub
[ 2.703756] hub 1-1:1.0: individual port power switching
[ 2.703758] hub 1-1:1.0: individual port over-current protection
[ 2.703759] hub 1-1:1.0: Single TT
[ 2.703761] hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.703762] hub 1-1:1.0: power on to power good time: 100ms
[ 2.703993] hub 1-1:1.0: local power source is good
[ 2.703999] hub 1-1:1.0: enabling power on all ports
[ 2.704924] drivers/usb/core/inode.c: creating file '002'
[ 2.704938] hub 2-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 2.704943] hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s
[ 2.756153] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 2.756158] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.804036] hub 1-1:1.0: port 1: status 0101 change 0001
[ 2.804277] hub 1-1:1.0: port 2: status 0101 change 0001
[ 2.806858] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.859000] ehci_hcd 0000:00:1d.0: port 1 high speed
[ 2.859006] ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT
[ 2.904728] usb 1-1: link qh256-0001/ffff8801a8354a80 start 1 [1/0 us]
[ 2.921859] ehci_hcd 0000:00:1d.0: set dev address 2 for port 1
[ 2.921870] ehci_hcd 0000:00:1d.0: LPM: no device attached
[ 2.922231] usb 2-1: udev 2, busnum 2, minor = 129
[ 2.922240] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 2.923135] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.924199] usb 2-1: usb_probe_device
[ 2.924203] usb 2-1: configuration #1 chosen from 1 choice
[ 2.924372] usb 2-1: adding 2-1:1.0 (config #1, interface 0)
[ 2.924570] hub 2-1:1.0: usb_probe_interface
[ 2.924573] hub 2-1:1.0: usb_probe_interface - got id
[ 2.924575] hub 2-1:1.0: USB hub found
[ 2.925547] hub 2-1:1.0: 6 ports detected
[ 2.926418] hub 2-1:1.0: standalone hub
[ 2.926419] hub 2-1:1.0: individual port power switching
[ 2.926421] hub 2-1:1.0: individual port over-current protection
[ 2.926422] hub 2-1:1.0: Single TT
[ 2.926424] hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 2.926425] hub 2-1:1.0: power on to power good time: 100ms
[ 2.926675] hub 2-1:1.0: local power source is good
[ 2.926684] hub 2-1:1.0: enabling power on all ports
[ 2.927618] drivers/usb/core/inode.c: creating file '002'
[ 2.927634] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 2.927636] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0000
[ 2.927644] hub 4-0:1.0: port 1, status 0203, change 0000, 5.0 Gb/s
[ 3.026946] hub 2-1:1.0: port 3: status 0101 change 0001
[ 3.027316] hub 2-1:1.0: port 5: status 0101 change 0001
[ 3.029721] usb 4-1: new SuperSpeed USB device number 2 using xhci_hcd
[ 3.043995] usb 4-1: skipped 1 descriptor after endpoint
[ 3.044006] usb 4-1: udev 2, busnum 4, minor = 385
[ 3.044011] usb 4-1: New USB device found, idVendor=0451, idProduct=8040
[ 3.044929] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.046016] usb 4-1: usb_probe_device
[ 3.046020] usb 4-1: configuration #1 chosen from 1 choice
[ 3.046422] usb 4-1: Successful Endpoint Configure command
[ 3.046769] usb 4-1: adding 4-1:1.0 (config #1, interface 0)
[ 3.047020] hub 4-1:1.0: usb_probe_interface
[ 3.047023] hub 4-1:1.0: usb_probe_interface - got id
[ 3.047025] hub 4-1:1.0: USB hub found
[ 3.048352] hub 4-1:1.0: 4 ports detected
[ 3.049290] hub 4-1:1.0: standalone hub
[ 3.049292] hub 4-1:1.0: ganged power switching
[ 3.049294] hub 4-1:1.0: global over-current protection
[ 3.049295] hub 4-1:1.0: TT requires at most 8 FS bit times (666 ns)
[ 3.049297] hub 4-1:1.0: power on to power good time: 100ms
[ 3.049955] usb 4-1: Successful Endpoint Configure command
[ 3.050309] hub 4-1:1.0: local power source is good
[ 3.050314] hub 4-1:1.0: no over-current condition exists
[ 3.050556] hub 4-1:1.0: enabling power on all ports
[ 3.051762] drivers/usb/core/inode.c: creating file '002'
[ 3.051778] hub 1-1:1.0: state 7 ports 6 chg 0006 evt 0000
[ 3.051884] hub 1-1:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 3.062475] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
[ 3.124567] usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
[ 3.127310] usb 2-1: link qh256-0001/ffff8801a8354480 start 1 [1/0 us]
[ 3.136539] hub 1-1:1.0: port 1 not reset yet, waiting 10ms
[ 3.151744] hub 4-1:1.0: port 1: status 0203 change 0031
[ 3.152823] hub 4-1:1.0: port 2: status 0203 change 0031
[ 3.214467] usb 1-1.1: udev 3, busnum 1, minor = 2
[ 3.214477] usb 1-1.1: New USB device found, idVendor=8086, idProduct=0189
[ 3.215424] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.216486] usb 1-1.1: usb_probe_device
[ 3.216489] usb 1-1.1: configuration #1 chosen from 1 choice
[ 3.217005] usb 1-1.1: adding 1-1.1:1.0 (config #1, interface 0)
[ 3.217161] btusb 1-1.1:1.0: usb_probe_interface
[ 3.217164] btusb 1-1.1:1.0: usb_probe_interface - got id
[ 3.217419] usb 1-1.1: adding 1-1.1:1.1 (config #1, interface 1)
[ 3.217514] usb 1-1.1: link qh1-0e01/ffff8801a8354000 start 0 [1/2 us]
[ 3.217588] drivers/usb/core/inode.c: creating file '003'
[ 3.217739] hub 1-1:1.0: port 2, status 0101, change 0000, 12 Mb/s
[ 3.228401] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
[ 3.290313] usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
[ 3.302288] hub 1-1:1.0: port 2 not reset yet, waiting 10ms
[ 3.376676] usb 1-1.2: default language 0x0409
[ 3.377136] usb 1-1.2: udev 4, busnum 1, minor = 3
[ 3.377145] usb 1-1.2: New USB device found, idVendor=0bda, idProduct=0139
[ 3.378119] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.379008] usb 1-1.2: Product: USB2.0-CRW
[ 3.379880] usb 1-1.2: Manufacturer: Generic
[ 3.380746] usb 1-1.2: SerialNumber: 20100201396000000
[ 3.381705] usb 1-1.2: usb_probe_device
[ 3.381708] usb 1-1.2: configuration #1 chosen from 1 choice
[ 3.382090] usb 1-1.2: adding 1-1.2:1.0 (config #1, interface 0)
[ 3.382538] drivers/usb/core/inode.c: creating file '004'
[ 3.382554] hub 2-1:1.0: state 7 ports 6 chg 0028 evt 0000
[ 3.382642] hub 2-1:1.0: port 3, status 0101, change 0000, 12 Mb/s
[ 3.392979] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
[ 3.455073] usb 2-1.3: new high-speed USB device number 3 using ehci_hcd
[ 3.457381] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input7
[ 3.467047] hub 2-1:1.0: port 3 not reset yet, waiting 10ms
[ 3.541432] usb 2-1.3: udev 3, busnum 2, minor = 130
[ 3.541441] usb 2-1.3: New USB device found, idVendor=0451, idProduct=8042
[ 3.542378] usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.543411] usb 2-1.3: usb_probe_device
[ 3.543414] usb 2-1.3: configuration #1 chosen from 1 choice
[ 3.543509] usb 2-1.3: adding 2-1.3:1.0 (config #1, interface 0)
[ 3.543597] hub 2-1.3:1.0: usb_probe_interface
No issues here.
|