Cisco 2950 Series switch with no ios or permisions
 

C2950 Boot Loader (C2950-HBOOT-M) Version 12.1(11r)EA1, RELEASE SOFTWARE (fc1)
Compiled Mon 22-Jul-02 17:18 by antonino
WS-C2950-24 starting...
Base ethernet MAC Address: 00:0b:46:38:4b:00
Xmodem file system is available.

The system has been interrupted prior to initializing the
flash filesystem. The following commands will initialize
the flash filesystem, and finish loading the operating
system software:

flash_init
load_helper
boot

switch: flash_init
Initializing Flash...
flashfs[0]: 2 files, 1 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 7741440
flashfs[0]: Bytes used: 3072
flashfs[0]: Bytes available: 7738368
flashfs[0]: flashfs fsck took 5 seconds.
...done initializing flash.
Boot Sector Filesystem (bs:) installed, fsid: 3
Parameter Block Filesystem (pb:) installed, fsid: 4



I make it that far and the switch freezes. I know that there isn't an image on the the switch i've tried tftp and xmodem. I can't find a way to get the image on the switch. Anyone that has any advice it would be highly valued and appreciated.

unrelated to Linux. moved to General.