The NCTUns 6.0 Network Simulator Installation Script Program
*
*    Notes: 1. You must be the root user to successfully run this program.
*           2. Normally, you can simply answer "y" or "yes" to all questions.
*           3. The related files of NCTUns will be installed in /usr/local/nctuns by default.
*
*
*
* In the following, this script will begin to install NCTUns. If you want
* to abort this installation, you should press "control+C" NOW!
*
* Otherwise, you can press the "Enter" key to begin.
*

**                                                            
**        Install the NCTUns Kernel                           
**                                                            
   STATE: skip... install the NCTUns kernel
  REPORT: install the NCTUns kernel ... skip

**                                                            
**        Install System Libraries                            
**                                                            
   STATE: skip... install library
  REPORT: install libstdc++.so.6 ... .skip
  REPORT: install libtcl8.5 ... skip
  REPORT: install libpcap.so.0.9 ... skip

**                                                            
**        Build the simulation engine and libraries           
**                                                            
   STATE: skip... build nctuns and libawp.so
  REPORT: build and install nctuns ... skip
  REPORT: build and install advanced wireless phy library ... skip
**                                                            
**        Build coordinator & dispatcher                      
**                                                            
   STATE: skip... build coordinator and dispatcher
  REPORT: build and install coordinator ... skip
  REPORT: install coordinator configuration file ... skip
  REPORT: build and install dispatcher ... skip
  REPORT: install dispatcher configuration file ... skip
**                                                            
**        Create Tunnels                                      
**                                                            
   STATE: skip... create rules of udev for nctuns tunnel
  REPORT: create rules of udev for nctuns tunnel ... skip
**                                                            
**        Install and enable rsh-server for command console       
**                                                            
   STATE: skip install and enable rsh-server for command console
  REPORT: install Xinetd Internet services daemon ... skip
  REPORT: install rsh server ... skip
  REPORT: enable rlogin and rsh ... skip
  REPORT: skip rlogin authentication for pam.d ... skip
  REPORT: install xterm ... skip
  REPORT: build and install nctuns-tcsh ... skip
  REPORT: build and install shell ... skip
**                                                            
**        Build Traffic Generator                             
**                                                            
   STATE: skip... build traffic generator
  REPORT: build and install stcp and rtcp ... skip
  REPORT: build and install ttcp ... skip
  REPORT: build and install stg and rtg ... skip
  REPORT: build and install rtp library ... skip
  REPORT: build and install rtp example tools ... skip
**                                                            
**        Build Tactic Network Agent                          
**                                                            
   STATE: skip... build tactic network agent
  REPORT: build tactic network agent ... skip
  REPORT: install ITS profile ... fail
**                                                            
**        Build Miscellaneous Tools                           
**                                                            
   STATE: skip... build misc tools
 REPORT: build and install printPtr ... skip
  REPORT: copy package trace format file ... skip
  REPORT: build and install ripd ... skip
  REPORT: build and install ospfd ... skip
  REPORT: build and install agent of mipd... skip
  REPORT: build and install mnd of mipd... skip
  REPORT: build and install rod of mipd... skip
**                                                            
**        Install the Programs of System Utility Commands (e.g., route, ping, etc.)       
**                                                            
   STATE: skip... install binary
  REPORT: install nctuns.csh and nctuns.bash ... skip
  REPORT: install route command ... skip
  REPORT: install tcpdump command ... skip
  REPORT: install ping command ... skip
  REPORT: install ifconfig command ... skip
**                                                            
**        Install GUI And Related Files                       
**                                                            
   STATE: skip... install GUI and related files
 REPORT: install nctunsclient.bin ... skip
  REPORT: install nctunsclient ... skip
  REPORT: install BMP for gui ... skip
  REPORT: install app.xml for gui ... skip
  REPORT: install ps.cfg for gui ... skip
  REPORT: install mdf for gui ... skip
  REPORT: install agp for gui ... skip
**                                                            
**        Modify the SELinux Configuration                    
**                                                            
   STATE: modify the SELinux configuration

*
* By default, the SELinux option is enabled in Fedora. However, 
* if SELinux option is enabled, it will decline to execute the NCTUns engine or the
* NCTUns client program. To run NCTUns correctly, you should disable SELinux.
*
 
** Would you want to disable SELinux? [yes/no](No)
> 
  REPORT: modify the SELinux configuration ... skip
**                                                           
**        Append NCTUns Environment Varables to the Shell Profile       
**                                                            
   STATE: append NCTUns environment variables to profile

* To run up NCTUns programs correctly, some NCTUns-related environment variables
* must be set up first in each xterm. If you answer "yes" to the following
* question, this installation program will append these environment variables
* to the shell profile of the account of the installing user. Doing so can save
* you much time in the future because you need not set up these environment
* variables manually each time when you open a xterm.
* 

** Would you want this installation program to automatically append some
** NCTUns-related environment variables to the shell profile
** of the account that you use to install NCTUns? [yes/no](No)
> 
REPORT: append NCTUns environment variables to the profile of the installing user's account ... skip

**                                                            
**        Create the Default Simulation User Account          
**                                                            
   STATE: create a new user account (nctuns) as the default simulation user account

*  The initial account name/password of this newly created account is nctuns/nctuns.
*  The GUI program will use this account/password as the default simulation user account/password.
*  Creating this account here is for a lazy user's convenience because he (she) does not need to
*  create an account and then use the account/password in the GUI program to run up a simulation.
*  A prudent user should change the initial password of this account to a new one and then use the
*  new password in the GUI program to run up a simulation."

** Would you want to create a new user account (nctuns) as the default simulation user account [yes/no](No)
> 
  REPORT: create a new user account (ncutns) ... skip



**                                                            
**        Install Modified qtrc File                          
**                                                            
   STATE: install modified qtrc file for better looking in the GUI program

* For the best display quality of the GUI program, NCTUns has to modify the QT 
* library configuration file (the qtrc file) to force the desktop manager, e.g.,
* KDE and GNOME, to use 10-size font for display. If the original qtrc file
* is used, the font size used by the GUI program may be incorrect, resulting in
* low display quality. (It is recommended to use the KDE desktop manager with 
* the version 4.0.5 or higher and our provided qtrc file to achieve the best
* GUI display quality. If you answer "yes" to the following question, the modified 
* qtrc file will be copied to the home directory of the installing user's account, 
* which is "root."

** Would you want to install the modified qtrc? [yes/no](No)
> 
 REPORT: install modified qtrc file for better looking in the GUI program ... skip



**                                                            
**        Final Check                                         
**                                                            
** Results:
**

**   install the NCTUns kernel ... skip
**   install libstdc++.so.6 ... .skip
**   install libtcl8.5 ... skip
**   install libpcap.so.0.9 ... skip
**   build and install nctuns ... skip
**   build and install advanced wireless phy library ... skip
**   build and install coordinator ... skip
**   install coordinator configuration file ... skip
**   build and install dispatcher ... skip
**   install dispatcher configuration file ... skip
**   create rules of udev for nctuns tunnel ... skip
**   install Xinetd Internet services daemon ... skip
**   install rsh server ... skip
**   enable rlogin and rsh ... skip
**   skip rlogin authentication for pam.d ... skip
**   install xterm ... skip
**   build and install nctuns-tcsh ... skip
**   build and install shell ... skip
**   build and install stcp and rtcp ... skip
**   build and install ttcp ... skip
**   build and install stg and rtg ... skip
**   build and install rtp library ... skip
**   build and install rtp example tools ... skip
**   build tactic network agent ... skip
**   install ITS profile ... fail
**   build and install printPtr ... skip
**   copy package trace format file ... skip
**   build and install ripd ... skip
**   build and install ospfd ... skip
**   build and install agent of mipd... skip
**   build and install mnd of mipd... skip
**   build and install rod of mipd... skip
**   install nctuns.csh and nctuns.bash ... skip
**   install route command ... skip
**   install tcpdump command ... skip
**   install ping command ... skip
**   install ifconfig command ... skip
**   install nctunsclient.bin ... skip
**   install nctunsclient ... skip
**   install BMP for gui ... skip
**   install app.xml for gui ... skip
**   install ps.cfg for gui ... skip
**   install mdf for gui ... skip
**   install agp for gui ... skip
**   modify the SELinux configuration ... skip
**   append NCTUns environment variables to the profile of the installing user's account ... skip
**   create a new user account (ncutns) ... skip
**   install modified qtrc file for better looking in the GUI program ... skip
**
** Please press the "Enter" key to continue


=====================================================================
** Before you start using NCTUns, please check whether you have done
** all of these steps. According to our technical support experiences,
** most problems are caused by not performing all of these steps.
=====================================================================
**
**     0. The NCTUns programs have been successfully compiled and installed.
**     1. You have rebooted your system and is using the newly-built kernel.  
**     2. The rlogin and rsh services in /etc/xinetd.d/rlogin and 
**        /etc/xinetd.d/rsh have been enabled.
**     3. The NCTUNSHOME, NCTUNS_TOOLS, and NCTUNS_BIN environment variables
**        have been set properly.  
**        You can use the following command to do this job:
**        [csh/tcsh] # source /usr/local/nctuns/etc/nctuns.csh
**        [bash]     # source /usr/local/nctuns/etc/nctuns.bash
**     4. You have stopped the iptables service by executing
**        "service iptables stop".
**     5. You have set "SELINUX=disabled" in /etc/sysconfig/selinux
**
=====================================================================
**
**  If you would like to seek helps or exchange your ideas/questions 
**  with other NCTUns users, you may check and use the following services:
**
**   (1) NCTUns mailing list: http://nsl10.csie.nctu.edu.tw/pipermail/nctuns/
**   (2) NCTUns forum: http://nsl10.csie.nctu.edu.tw/phpBB/
**
**  Thank you.

 Important Notice!

 If your X-window system adopts KDE as the default desktop manager program, 
 please BE SURE to upgrade your KDE version to 4.0.5 or higher. It is found 
 that KDE 4.0.3 is likely to trigger unexpected signals to the NCTUns
 simulation engine, which may cause the simulation engine to run abnormally.

 Besides, we suggest to upgrade the OpenGL library into the newest version
 because of the display of the GUI. If you have a video card equipped on your
 machine, please find the latest driver for your video card.

 To upgrade KDE and OpenGL libraries, you can use the following command:

   yum update

 Although this command will update all programs contained in Fedora 11
 (including KDE, OpenGL libraries) and thus may take a long time, it is the
 easiest way to upgrade KDE. If you just upgrade KDE, some dependency problems
 may result.

 [root@localhost ~]# uname -m
x86_64
[root@localhost ~]#

[fedora11]
name=Fedora11-i386
baseurl=http://archives.fedoraproject.org/pub/archive/fedora/linux/releases/11/Everything/i386/os/
enabled=1
gpgcheck=0

[fc11-updates]
name=Fedora11-updates-i386
baseurl=http://archives.fedoraproject.org/pub/archive/fedora/linux/updates/11/i386/
enabled=1
gpgcheck=0