LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Fedora > Fedora - Installation
User Name
Password
Fedora - Installation This forum is for the discussion of installation issues with Fedora.

Notices

Reply
 
Search this Thread
Old 03-28-2006, 05:16 AM   #1
Paltrude
LQ Newbie
 
Registered: Aug 2004
Location: Sweden, northern parts.
Distribution: GNU-Linux
Posts: 24

Rep: Reputation: 15
"Linux Image" missing in Fedora Core 5 - WTF?


Sha1sum showed the numbers just fine after downloading the Fedora Core 5 DVD and the burning went fine but upon boot, when asked which install to do, i chose enter, the installer claims no Linux image present? I then chose linux text, same thing.

I then downloaded the cd:s and the same thing all over.

Is the Fedora Core 5 boot image something different from the other Cores? Maybe my dvd-rom has problems reading it? What's your theory?

Hardware: Zepto Znote 4040 – Chipset Intel 855 GM
BIOS: 2160
CPU: 1.5 GHz Intel Celeron M 1MB Cache
RAM: 1*512MB - PC3200
GPU - MB-Integrated: Intel - Extreme Graphics 2 - 16<64MB Shared with RAM
APU - MB-Integrated: ‎Intel - ICH4 AC97 with Realteks [ALC202 - v2.2] Codec
LAN - MB-Integrated: Realtek - RTL 8101 - 10/100Mbit
MODEM - MB-Integrated: Smart Link - 56K
WLAN - Built in: Intel - PRO/Wireless - 2915ABG - 54Mbit
LCD: 15" XGA+ 1024x768
HDD: Hitachi - 40GB, UDMA/UATA 5, 5400 Rpm, Cache: 8 MB
ODD: Compal TSB24H1, UDMA/UATA 2, Firmware C012 - Combo “DVD-Reader and CD-Writer/Rewriter”
 
Old 03-28-2006, 09:44 AM   #2
kilgoretrout
Senior Member
 
Registered: Oct 2003
Posts: 2,294

Rep: Reputation: 138Reputation: 138
I assume that's a laptop; please correct me if I'm wrong. Your specs look like typical laptop specs although I'm not familiar with Zepto. Certain laptop manufacturers hook up the optical drive in ways other than through the standard ide interface and that can cause problems with linux; older sony vaios are known to have this problem. Basically, what happens is as soon as the install program loads the linux kernel, it can't find the optical drive any longer.
There is a workaround that works sometimes. Install in text mode and pass the following boot options:

linux nopcmcia ide2=0x180,0x386
 
Old 03-28-2006, 09:55 AM   #3
Paltrude
LQ Newbie
 
Registered: Aug 2004
Location: Sweden, northern parts.
Distribution: GNU-Linux
Posts: 24

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by kilgoretrout
I assume that's a laptop; please correct me if I'm wrong.
Yes it's a laptop. Quite nice actually in a "small bang for small buck" way. More bang than buck though hehe.

Although FC4, Mandriva 2006 and Ubuntu 5.10 didn't have this problem, I will try out your suggestion some time later this week. I'll post the results here.
Thanks!
 
Old 04-15-2006, 06:35 AM   #4
Paltrude
LQ Newbie
 
Registered: Aug 2004
Location: Sweden, northern parts.
Distribution: GNU-Linux
Posts: 24

Original Poster
Rep: Reputation: 15
Quote:
Originally Posted by kilgoretrout
linux nopcmcia ide2=0x180,0x386
I'm sad to say that this line wasn't accepted by the boot prompt.

Fedora Core 5 is the first distro that has this problem with my laptop so I wonder where the problem lies, if not where you pointed I mean?
 
Old 05-09-2006, 01:12 AM   #5
Paltrude
LQ Newbie
 
Registered: Aug 2004
Location: Sweden, northern parts.
Distribution: GNU-Linux
Posts: 24

Original Poster
Rep: Reputation: 15
Unhappy *bump*

Anyone else have any idea about this problem?
Please help.
 
Old 05-19-2006, 04:18 PM   #6
Emeriz
LQ Newbie
 
Registered: Jan 2006
Location: Seattle, WA
Distribution: Linux Mint 8
Posts: 2

Rep: Reputation: 0
Question

Quote:
Originally Posted by Paltrude
Sha1sum showed the numbers just fine after downloading the Fedora Core 5 DVD and the burning went fine but upon boot, when asked which install to do, i chose enter, the installer claims no Linux image present? I then chose linux text, same thing.

I then downloaded the cd:s and the same thing all over.

Is the Fedora Core 5 boot image something different from the other Cores? Maybe my dvd-rom has problems reading it? What's your theory?

Hardware: Zepto Znote 4040 – Chipset Intel 855 GM
BIOS: 2160
CPU: 1.5 GHz Intel Celeron M 1MB Cache
RAM: 1*512MB - PC3200
GPU - MB-Integrated: Intel - Extreme Graphics 2 - 16<64MB Shared with RAM
APU - MB-Integrated: ‎Intel - ICH4 AC97 with Realteks [ALC202 - v2.2] Codec
LAN - MB-Integrated: Realtek - RTL 8101 - 10/100Mbit
MODEM - MB-Integrated: Smart Link - 56K
WLAN - Built in: Intel - PRO/Wireless - 2915ABG - 54Mbit
LCD: 15" XGA+ 1024x768
HDD: Hitachi - 40GB, UDMA/UATA 5, 5400 Rpm, Cache: 8 MB
ODD: Compal TSB24H1, UDMA/UATA 2, Firmware C012 - Combo “DVD-Reader and CD-Writer/Rewriter”

I am seeing the exact same errors with both the DVD and CD Iso's. I have checked the SHA1SUM on them and they look fine. I have tried burning from 2 different computers using two differnt pieces of software with the same results. I had Knoppix (well Knoppmyth) loaded on this same machine and I simply had to set the SATA drives to Legacy mode to get it to install. With FC5's suport of SATA I wouldn't think I would have to do that.

One wierd thing I see every single time is some garbled text (i.e. lots of special characters) on top of the "English" option when it asks you to Choose a Language. Then I choose English/us/CD-ROM and it pauses for almost a minute and pops the DVD Burner open (the DVD is in the other drive) and pops up the message to enter the Fedora CD. Even moving the DVD or CD to that drive or putting the DVD in one and the CD in the other do not seem to help any.

The machine is as follows:

MSI 865PE Neo2-V motherboard
P4 3.0 Ghz
1 GB RAM
NVidia 5950 Ultra
80GB SATA drive
120GB SATA Drive
IDE DVD-ROM 16X
DVD Burner - Pioneer DVR-106D
Sound Blaster Live

Any help would be appreciated.
 
Old 05-19-2006, 04:56 PM   #7
Emeriz
LQ Newbie
 
Registered: Jan 2006
Location: Seattle, WA
Distribution: Linux Mint 8
Posts: 2

Rep: Reputation: 0
Lightbulb Success....hopefully

Well, Legacy mode in the BIOS seems to be fixing the issue, I am getting much farther than I was before, I'll keep you updated.

What I think is happning, at least in my case, is that the ata_piix driver is loading after the DVD has booted up and that is causing the IDE Drives to no longer be recognized. But its just a guess, I am still fairly new to Linux.

The downside is I lose a lot of the performance boosts of SATA this way. But its better than buying a new system I gues.

Em
 
Old 05-20-2006, 07:19 AM   #8
Paltrude
LQ Newbie
 
Registered: Aug 2004
Location: Sweden, northern parts.
Distribution: GNU-Linux
Posts: 24

Original Poster
Rep: Reputation: 15
Bugger... I don't have any way of moving forward myself since I don't have any legacy settings in the BIOS to configure.
I wonder if there is another "work around" as the one that was mentioned earlier: linux nopcmcia ide2=0x180,0x386

Anyone with any ideas?

Quote:
Originally Posted by Emeriz
Well, Legacy mode in the BIOS seems to be fixing the issue, I am getting much farther than I was before, I'll keep you updated.

What I think is happning, at least in my case, is that the ata_piix driver is loading after the DVD has booted up and that is causing the IDE Drives to no longer be recognized. But its just a guess, I am still fairly new to Linux.

The downside is I lose a lot of the performance boosts of SATA this way. But its better than buying a new system I gues.

Em
 
Old 05-30-2006, 06:33 AM   #9
lebabyg
Member
 
Registered: Mar 2006
Location: UK
Distribution: Ubuntu Feisty
Posts: 272

Rep: Reputation: 30
try this

vmlinuz initrd = initrd.img
or
/isolinux/vmlinuz initrd = /isolinux/initrd.img

Should get you a little further!!
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fedora Core 2: Screen Resolution can not change from "800X600" to "1024X 768" suhaimi_sj Fedora - Installation 18 12-17-2009 03:29 AM
"Xlib: extension "XFree86-DRI" missing on display ":0.0"." zaps Linux - Games 9 05-14-2007 03:07 PM
Cannot install fedora core 1 or core 2: Initial setup crashes: "Unable to mount root" ovelasco Linux - Newbie 10 07-15-2004 07:19 PM
suse ati driver "Xlib: extension "XiG-SUNDRY-NONSTANDARD" missing" madcow007 Linux - Hardware 0 03-06-2004 02:53 PM


All times are GMT -5. The time now is 06:15 PM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration