X800 Dual Head Fedora Core 3
I am up and running with Fedora Core 3 and everything is functioning properly even my ati x800 pro card. My only problem is that right now the card is mirroring the same desktop on both monitors. So I went into the System Settings > Display program to configure the Display. I then select dual head and then configure all of the options and then click "OK", but nothing happens and the chnages I make are not saved.
Any ideas? |
This time I ran system-config-display from the terminal this time to see if it dumped any errors and it does. After clicking ok it dumps ValueError: too many values to unpack
Any idea why I would be getting this? |
after loading the fglx drivers and such I thought I had it licked. Now my config file looks right but it is still only cloning my monitors
# Xorg configuration created by system-config-display Section "ServerLayout" Identifier "Multihead layout" Screen 0 "Screen0" LeftOf "Screen1" Screen 1 "Screen1" 0 0 InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" Option "Xinerama" "on" Option "Clone" "off" EndSection Section "Files" # RgbPath is the location of the RGB database. Note, this is the name of the # file minus the extension (like ".txt" or ".db"). There is normally # no need to change the default. # Multiple FontPath entries are allowed (they are concatenated together) # By default, Red Hat 6.0 and later now use a font server independent of # the X server to render fonts. RgbPath "/usr/X11R6/lib/X11/rgb" FontPath "unix/:7100" EndSection Section "Module" Load "dbe" Load "extmod" Load "fbdevhw" Load "glx" Load "record" Load "freetype" Load "type1" Load "dri" EndSection Section "InputDevice" # Specify which keyboard LEDs can be user-controlled (eg, with xset(1)) # Option "Xleds" "1 2 3" # To disable the XKEYBOARD extension, uncomment XkbDisable. # Option "XkbDisable" # To customise the XKB settings to suit your keyboard, modify the # lines below (which are the defaults). For example, for a non-U.S. # keyboard, you will probably want to use: # Option "XkbModel" "pc102" # If you have a US Microsoft Natural keyboard, you can use: # Option "XkbModel" "microsoft" # # Then to change the language, change the Layout setting. # For example, a german layout can be obtained with: # Option "XkbLayout" "de" # or: # Option "XkbLayout" "de" # Option "XkbVariant" "nodeadkeys" # # If you'd like to switch the positions of your capslock and # control keys, use: # Option "XkbOptions" "ctrl:swapcaps" # Or if you just want both to be control, use: # Option "XkbOptions" "ctrl:nocaps" # Identifier "Keyboard0" Driver "kbd" Option "XkbModel" "pc105" Option "XkbLayout" "us" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "IMPS/2" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5" Option "Emulate3Buttons" "yes" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "LCD Panel 1280x1024" DisplaySize 340 270 HorizSync 31.5 - 67.0 VertRefresh 50.0 - 75.0 Option "dpms" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "LCD Panel 1280x1024" HorizSync 31.5 - 67.0 VertRefresh 50.0 - 75.0 Option "dpms" EndSection Section "Device" Identifier "Videocard0" Driver "fglrx" VendorName "Videocard vendor" BoardName "ATI Radeon X800PRO" Option "VideoOverlay" "on" EndSection Section "Device" Identifier "Videocard1" Driver "radeon" VendorName "Videocard Vendor" BoardName "ATI Radeon X800PRO" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Videocard0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 16 Modes "800x600" "640x480" EndSubSection SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" "1280x960" "1152x864" "1024x768" "800x600" "640x480" EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Videocard1" Monitor "Monitor1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 Modes "1280x1024" EndSubSection EndSection Section "DRI" Group 0 Mode 0666 EndSection |
Hi there
I am in exactly the same boat as you with this i get desktop cloning but when i scroll the mouse the second monitor will scroll from right to left and display whats been cut off the sreen buts all distorted wondered if anyone had any solution to this so i can get dual monitors working? when i run system-config-display from terminal i get this Code:
[adam@localhost ~]$ system-config-display :D and my system specs 2.4ghz lga775 p4 700mb ram 80gb ide / 80gb sata ati x800xt pci-e 256mb 2x benq fp783 |
All times are GMT -5. The time now is 03:18 AM. |