I'm trying to get my Agfa Snapscan 1212u working with FC2. There are a lot of HOWTOs on the net, but unfortunatly nothing works. There is every where something written about it, but not one is like a systematic procedure for this configuration. $ sane-find-scanner shows the snapscan on libusb:002:003 and the first time (only the first time) I enter $ scanimage -L the scanner seems to be detected but if I start xsane the message is allways: NO DEVICE FOUND. Can anybody tell me what's wrong there or give me a systematic describtion how to make this thing working?

Thanks, Martin

Martin,

Did you manage to get it to work.
The behaviour of my snapscan 1212U is exactly the same.

* sane-find-scanner always detects the scanner

* After plugging the scanner to the machine, scanimage -L detects the scanner exactly ONCE.

* A second execution of scanimage -L reports no scanners found.

* Plugging the scanner and immediately starting xsane reports an I/O error.

The scanner worked perfectly with RH9 ... any ideas ??


Any help/directions very welcome !

Koen

the scanner is plugged in ...

[root@xiii root]# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 009: ID 06bd:0001 AGFA-Gevaert NV SnapScan 1212U
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

unplugging and plugging back gives me a new and higher device number ... is this normal ?
[root@xiii root]# lsusb
Bus 005 Device 001: ID 0000:0000
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 010: ID 06bd:0001 AGFA-Gevaert NV SnapScan 1212U
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000

so i uncomented the device number in /etc/sane.d/snapscan.conf.
I took the firmware binary from the windows distribution has found from snapscan.sourceforge.net

here's my snapscan.conf file :
firmware /etc/sane.d/SnapScan_1212U_2.bin
# Agfa 1212U
usb 0x06bd 0x0001
#/dev/usb/scanner0 bus=usb
#libusb:002:009 bus=usb

the other tool "sane-troubleshoot" give me this in the log :

[snapscan] usb_read Only 0 bytes read
[snapscan] usb_read: reading: 0x32 0x00 0x00 0x00 0xff 0x00 0x00 0x00
[snapscan] mini_inquiry: snapscan_cmd command failed: Error during device I/O
[snapscan] snapscani_check_device: mini_inquiry failed with Error during device I/O.

[root@xiii root]# sane-find-scanner

# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a SCSI driver for your SCSI adapter.

found USB scanner (vendor=0x06bd [AGFA], product=0x0001 [SNAPSCAN 1212U]) at libusb:002:009
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.

# Scanners connected to the parallel port or other proprietary ports can't be
# detected by this program.


[root@xiii root]# rpm -qa | grep sane
libsane-hpoj-0.91-7
sane-backends-1.0.13-7
xsane-0.92-10
sane-frontends-1.0.11-4
xsane-gimp-0.92-10
sane-backends-devel-1.0.13-7

this is what the output of scanimage gives me. it hangs always on the backend snapscan, so somehow it knows it's there ... ???

[root@xiii root]# scanimage -L
[sanei_debug] Setting debug level of dll to 255.
[dll] sane_init: SANE dll backend version 1.0.10 from sane-backends 1.0.13
[dll] sane_init: reading dll.conf
[dll] add_backend: adding backend `net'
[dll] add_backend: adding backend `abaton'
[dll] add_backend: adding backend `agfafocus'
[dll] add_backend: adding backend `apple'
[dll] add_backend: adding backend `avision'
[dll] add_backend: adding backend `artec'
[dll] add_backend: adding backend `artec_eplus48u'
[dll] add_backend: adding backend `as6e'
[dll] add_backend: adding backend `bh'
[dll] add_backend: adding backend `canon'
[dll] add_backend: adding backend `canon630u'
[dll] add_backend: adding backend `coolscan'
[dll] add_backend: adding backend `coolscan2'
[dll] add_backend: adding backend `dmc'
[dll] add_backend: adding backend `epson'
[dll] add_backend: adding backend `fujitsu'
[dll] add_backend: adding backend `gt68xx'
[dll] add_backend: adding backend `hp'
[dll] add_backend: adding backend `hpsj5s'
[dll] add_backend: adding backend `hp5400'
[dll] add_backend: adding backend `ibm'
[dll] add_backend: adding backend `leo'
[dll] add_backend: adding backend `ma1509'
[dll] add_backend: adding backend `matsushita'
[dll] add_backend: adding backend `microtek'
[dll] add_backend: adding backend `microtek2'
[dll] add_backend: adding backend `mustek'
[dll] add_backend: adding backend `mustek_usb'
[dll] add_backend: adding backend `nec'
[dll] add_backend: adding backend `pie'
[dll] add_backend: adding backend `pint'
[dll] add_backend: adding backend `plustek'
[dll] add_backend: adding backend `qcam'
[dll] add_backend: adding backend `ricoh'
[dll] add_backend: adding backend `s9036'
[dll] add_backend: adding backend `sceptre'
[dll] add_backend: adding backend `sharp'
[dll] add_backend: adding backend `sm3600'
[dll] add_backend: adding backend `snapscan'
[dll] add_backend: adding backend `sp15c'
[dll] add_backend: adding backend `tamarack'
[dll] add_backend: adding backend `teco1'
[dll] add_backend: adding backend `teco2'
[dll] add_backend: adding backend `teco3'
[dll] add_backend: adding backend `umax'
[dll] add_backend: adding backend `umax1220u'
[dll] add_backend: adding backend `v4l'
[dll] add_backend: adding backend `hpoj'
[dll] sane_get_devices
[dll] load: searching backend `hpoj' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpoj.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpoj.so.1'
[dll] init: initializing backend `hpoj'
[dll] init: backend `hpoj' is version 1.0.6
[dll] load: searching backend `v4l' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-v4l.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-v4l.so.1'
[dll] init: initializing backend `v4l'
[dll] init: backend `v4l' is version 1.0.2
[dll] load: searching backend `umax1220u' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-umax1220u.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-umax1220u.so.1'
[dll] init: initializing backend `umax1220u'
[dll] init: backend `umax1220u' is version 1.0.1
[dll] load: searching backend `umax' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-umax.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-umax.so.1'
[dll] init: initializing backend `umax'
[dll] init: backend `umax' is version 1.0.40
[dll] load: searching backend `teco3' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-teco3.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-teco3.so.1'
[dll] init: initializing backend `teco3'
[dll] init: backend `teco3' is version 1.0.1
[dll] load: searching backend `teco2' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-teco2.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-teco2.so.1'
[dll] init: initializing backend `teco2'
[dll] init: backend `teco2' is version 1.0.5
[dll] load: searching backend `teco1' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-teco1.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-teco1.so.1'
[dll] init: initializing backend `teco1'
[dll] init: backend `teco1' is version 1.0.9
[dll] load: searching backend `tamarack' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-tamarack.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-tamarack.so.1'
[dll] init: initializing backend `tamarack'
[dll] init: backend `tamarack' is version 1.0.0
[dll] load: searching backend `sp15c' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-sp15c.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-sp15c.so.1'
[dll] init: initializing backend `sp15c'
[dll] init: backend `sp15c' is version 1.0.0
[dll] load: searching backend `snapscan' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-snapscan.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-snapscan.so.1'
[dll] init: initializing backend `snapscan'
[dll] init: backend `snapscan' is version 1.4.35
[dll] load: searching backend `sm3600' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-sm3600.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-sm3600.so.1'
[dll] init: initializing backend `sm3600'
[dll] init: backend `sm3600' is version 1.0.5
[dll] load: searching backend `sharp' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-sharp.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-sharp.so.1'
[dll] init: initializing backend `sharp'
[dll] init: backend `sharp' is version 1.0.0
[dll] load: searching backend `sceptre' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-sceptre.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-sceptre.so.1'
[dll] init: initializing backend `sceptre'
[dll] init: backend `sceptre' is version 1.0.10
[dll] load: searching backend `s9036' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-s9036.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-s9036.so.1'
[dll] init: initializing backend `s9036'
[dll] init: backend `s9036' is version 1.0.0
[dll] load: searching backend `ricoh' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-ricoh.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-ricoh.so.1'
[dll] init: initializing backend `ricoh'
[dll] init: backend `ricoh' is version 1.0.0
[dll] load: searching backend `qcam' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-qcam.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-qcam.so.1'
[dll] init: initializing backend `qcam'
[dll] init: backend `qcam' is version 1.0.0
[dll] load: searching backend `plustek' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-plustek.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-plustek.so.1'
[dll] init: initializing backend `plustek'
[dll] init: backend `plustek' is version 1.0.0
[dll] load: searching backend `pint' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-pint.so.1'
[dll] load: couldn't open `/usr/lib/sane/libsane-pint.so.1' (No such file or directory)
[dll] load: couldn't find backend `pint' (No such file or directory)
[dll] load: searching backend `pie' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-pie.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-pie.so.1'
[dll] init: initializing backend `pie'
[dll] init: backend `pie' is version 1.0.9
[dll] load: searching backend `nec' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-nec.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-nec.so.1'
[dll] init: initializing backend `nec'
[dll] init: backend `nec' is version 1.0.0
[dll] load: searching backend `mustek_usb' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-mustek_usb.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek_usb.so.1'
[dll] init: initializing backend `mustek_usb'
[dll] init: backend `mustek_usb' is version 1.0.17
[dll] load: searching backend `mustek' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-mustek.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-mustek.so.1'
[dll] init: initializing backend `mustek'
[dll] init: backend `mustek' is version 1.0.134
[dll] load: searching backend `microtek2' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-microtek2.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek2.so.1'
[dll] init: initializing backend `microtek2'
[dll] init: backend `microtek2' is version 1.0.0
[dll] load: searching backend `microtek' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-microtek.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-microtek.so.1'
[dll] init: initializing backend `microtek'
[dll] init: backend `microtek' is version 1.0.0
[dll] load: searching backend `matsushita' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-matsushita.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-matsushita.so.1'
[dll] init: initializing backend `matsushita'
[dll] init: backend `matsushita' is version 1.0.6
[dll] load: searching backend `ma1509' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-ma1509.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-ma1509.so.1'
[dll] init: initializing backend `ma1509'
[dll] init: backend `ma1509' is version 1.0.3
[dll] load: searching backend `leo' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-leo.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-leo.so.1'
[dll] init: initializing backend `leo'
[dll] init: backend `leo' is version 1.0.10
[dll] load: searching backend `ibm' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-ibm.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-ibm.so.1'
[dll] init: initializing backend `ibm'
[dll] init: backend `ibm' is version 1.0.0
[dll] load: searching backend `hp5400' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hp5400.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hp5400.so.1'
[dll] init: initializing backend `hp5400'
[dll] init: backend `hp5400' is version 1.0.3
[dll] load: searching backend `hpsj5s' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hpsj5s.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hpsj5s.so.1'
[dll] init: initializing backend `hpsj5s'
[dll] init: backend `hpsj5s' is version 1.0.3
[dll] load: searching backend `hp' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-hp.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-hp.so.1'
[dll] init: initializing backend `hp'
[dll] init: backend `hp' is version 1.0.8
[dll] load: searching backend `gt68xx' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-gt68xx.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-gt68xx.so.1'
[dll] init: initializing backend `gt68xx'
[dll] init: backend `gt68xx' is version 1.0.49
[dll] load: searching backend `fujitsu' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-fujitsu.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-fujitsu.so.1'
[dll] init: initializing backend `fujitsu'
[dll] init: backend `fujitsu' is version 1.0.0
[dll] load: searching backend `epson' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-epson.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-epson.so.1'
[dll] init: initializing backend `epson'
[dll] init: backend `epson' is version 1.0.240
[dll] load: searching backend `dmc' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-dmc.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-dmc.so.1'
[dll] init: initializing backend `dmc'
[dll] init: backend `dmc' is version 1.0.0
[dll] load: searching backend `coolscan2' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-coolscan2.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan2.so.1'
[dll] init: initializing backend `coolscan2'
[dll] init: backend `coolscan2' is version 1.0.0
[dll] load: searching backend `coolscan' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-coolscan.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-coolscan.so.1'
[dll] init: initializing backend `coolscan'
[dll] init: backend `coolscan' is version 1.0.0
[dll] load: searching backend `canon630u' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-canon630u.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-canon630u.so.1'
[dll] init: initializing backend `canon630u'
[dll] init: backend `canon630u' is version 1.0.1
[dll] load: searching backend `canon' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-canon.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-canon.so.1'
[dll] init: initializing backend `canon'
[dll] init: backend `canon' is version 1.0.0
[dll] load: searching backend `bh' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-bh.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-bh.so.1'
[dll] init: initializing backend `bh'
[dll] init: backend `bh' is version 1.0.4
[dll] load: searching backend `as6e' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-as6e.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-as6e.so.1'
[dll] init: initializing backend `as6e'
[dll] load: searching backend `artec_eplus48u' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-artec_eplus48u.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-artec_eplus48u.so.1'
[dll] init: initializing backend `artec_eplus48u'
[dll] init: backend `artec_eplus48u' is version 1.0.0
[dll] load: searching backend `artec' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-artec.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-artec.so.1'
[dll] init: initializing backend `artec'
[dll] init: backend `artec' is version 1.0.0
[dll] load: searching backend `avision' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-avision.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-avision.so.1'
[dll] init: initializing backend `avision'
[dll] init: backend `avision' is version 1.0.80
[dll] load: searching backend `apple' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-apple.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-apple.so.1'
[dll] init: initializing backend `apple'
[dll] init: backend `apple' is version 1.0.0
[dll] load: searching backend `agfafocus' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-agfafocus.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-agfafocus.so.1'
[dll] init: initializing backend `agfafocus'
[dll] init: backend `agfafocus' is version 1.0.0
[dll] load: searching backend `abaton' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-abaton.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-abaton.so.1'
[dll] init: initializing backend `abaton'
[dll] init: backend `abaton' is version 1.0.0
[dll] load: searching backend `net' in `/usr/lib/sane'
[dll] load: trying to load `/usr/lib/sane/libsane-net.so.1'
[dll] load: dlopen()ing `/usr/lib/sane/libsane-net.so.1'
[dll] init: initializing backend `net'
[dll] init: backend `net' is version 1.0.13
[dll] sane_get_devices: found 0 devices

No scanners were identified. If you were expecting something different,
check that the scanner is plugged in, turned on and detected by the
sane-find-scanner tool (if appropriate). Please read the documentation
which came with this software (README, FAQ, manpages).
[dll] sane_exit: exiting
[dll] sane_exit: calling backend `hpoj's exit function
[dll] sane_exit: calling backend `v4l's exit function
[dll] sane_exit: calling backend `umax1220u's exit function
[dll] sane_exit: calling backend `umax's exit function
[dll] sane_exit: calling backend `teco3's exit function
[dll] sane_exit: calling backend `teco2's exit function
[dll] sane_exit: calling backend `teco1's exit function
[dll] sane_exit: calling backend `tamarack's exit function
[dll] sane_exit: calling backend `sp15c's exit function
[dll] sane_exit: calling backend `snapscan's exit function
[dll] sane_exit: calling backend `sm3600's exit function
[dll] sane_exit: calling backend `sharp's exit function
[dll] sane_exit: calling backend `sceptre's exit function
[dll] sane_exit: calling backend `s9036's exit function
[dll] sane_exit: calling backend `ricoh's exit function
[dll] sane_exit: calling backend `qcam's exit function
[dll] sane_exit: calling backend `plustek's exit function
[dll] sane_exit: calling backend `pie's exit function
[dll] sane_exit: calling backend `nec's exit function
[dll] sane_exit: calling backend `mustek_usb's exit function
[dll] sane_exit: calling backend `mustek's exit function
[dll] sane_exit: calling backend `microtek2's exit function
[dll] sane_exit: calling backend `microtek's exit function
[dll] sane_exit: calling backend `matsushita's exit function
[dll] sane_exit: calling backend `ma1509's exit function
[dll] sane_exit: calling backend `leo's exit function
[dll] sane_exit: calling backend `ibm's exit function
[dll] sane_exit: calling backend `hp5400's exit function
[dll] sane_exit: calling backend `hpsj5s's exit function
[dll] sane_exit: calling backend `hp's exit function
[dll] sane_exit: calling backend `gt68xx's exit function
[dll] sane_exit: calling backend `fujitsu's exit function
[dll] sane_exit: calling backend `epson's exit function
[dll] sane_exit: calling backend `dmc's exit function
[dll] sane_exit: calling backend `coolscan2's exit function
[dll] sane_exit: calling backend `coolscan's exit function
[dll] sane_exit: calling backend `canon630u's exit function
[dll] sane_exit: calling backend `canon's exit function
[dll] sane_exit: calling backend `bh's exit function
[dll] sane_exit: calling backend `artec_eplus48u's exit function
[dll] sane_exit: calling backend `artec's exit function
[dll] sane_exit: calling backend `avision's exit function
[dll] sane_exit: calling backend `apple's exit function
[dll] sane_exit: calling backend `agfafocus's exit function
[dll] sane_exit: calling backend `abaton's exit function
[dll] sane_exit: calling backend `net's exit function
[dll] sane_exit: finished

Hello Koen,

I still didn't manage t get it working. Do you have any news?

Martin

got the tar.gz for version 1.0.15, configure/make/make install
One small change to /etc/ld.so.conf to include /usr/local/lib/sane
and ... it works :-))

I can scan as root now. Next on the agenda: scanning as ordinary user in FC2.