Getting Error "fsck.ext3 Unable to resolve 'LABEL=boot'" during Booting...
On Booting FC4 just after successful initializaton of Hardware 'fsck' is launched which detects no errors but suddenly I see an ERROR being reflected after that...
"fsck.ext3 Unable to resolve 'LABEL=boot'"
I have created a Dual Booting system between Windows XP and Fedora Core 4 on my Laptop (HP dv2000-SATA based HDD); such that NTLDR is launched first and Displays its OS Selection Menu (b/w Windows XP and FC4) and then on selecting FC4 GRUB Menu is launched.
Partitioning done is as follows-
sda1- Windows XP
sda6-/boot (ext3)~200 Mb
Windows XP was installed first on "sda1" partition sector therefore NTLDR was already there on the MBR. I have installed GRUB on my Boot sector (sda6) rather than MBR.
Initialy, I had created a copy of my boot sector as "linux.bin" using command
"dd if=/dev/sda6 of=linux.bin bs=512 count=1"
Then copied linux.bin in my c: drive i.e sda1 and updated configuration file of NTLDR i.e boot.ini as follows-
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
c:\linux.bin="Fedora Core 4"
Below is my menu.lst/grub.conf file-
# grub.conf generated by anaconda
# Note that you do not have to rerun grub after making changes to this file
# NOTICE: You have a /boot partition. This means that
# all kernel and initrd paths are relative to /boot/, eg.
# root (hd0,5)
# kernel /vmlinuz-version ro root=/dev/sda8
# initrd /initrd-version.img
title Fedora Core 4 (2.6.11-1.1369_FC4)
kernel /vmlinuz-2.6.11-1.1369_FC4 ro root=LABEL=/ rhgb quiet
title Windows XP
NOTE: I needed above style of booting so that my Windows XP is always in bootable condition and i could independently do programming of Linux Kernel
I am new to compilation of Linux Kernel and Kernel programming, this is to avoid messing up with Windows XP which is freaquently required for other for other purposes,
Please extend your helping hands...it is really urgent for me to solve this problem.
Thanks In Anticipation
This means that there's some kind of filesystem corruption on your Linux partitions.If its LABEL=boot then I think it means your boot partition namely
sda6-/boot (ext3)~200 Mb
is corrupted or has some bad sectors. What you probably need to do is to pop in the Linux CD...go into Rescue mode and manually run an fsck on /boot which should clean up whatever problems there are.
Reboot into Linux and see what happens....If this doesnt work just put in your /etc/fstab file contents here....along with what other error messages you get.
It really came out to be a Trivial problem....I was able to solve it. Actually during installation I had given wrong LABEL=\boot to boot partition; it should have been LABEL=/boot.
This caused a mess up when "fsck" ran initially during startup; actually it was not able to recognize the boot partition by the LABEL name present within "fstab",since partition with LABEL=\boot never existed; what was existing LABEL=/boot.
I simply corrected LABEL name with "e2label" utility by going in "linux rescue" mode....and bing it worked....
Thanks for the help extended...
Good stuff .. hmm e2label ... new one there .. and the learning continues... :)
|All times are GMT -5. The time now is 02:48 AM.|