Fedora Core 3 Post Install Issues
Alright, I've recently added a Seagate SATA 160 Gig drive to my system and did a total rebuild from scratch of my Win2k and Linux installs. What I discovered in doing this is that FC2 didn't like the SATA drive, but that wasn't a major issue as FC3 was available.
FC3 installed with no problems, I had no issues with the crappy Disk Druid partitioning tool to set up the drives as they should be to make sure Win2k will boot through grub. But when I reboot and try to start linux it gets to the point where the Red Hat nash Version 4.1.whatever is starting and just sits there.
I'm a little baffled that there's not any kind of error message provided at all.
Any idea's what might be wrong?
Athlon XP 2800+
Soyo Dragon Platinum Ultra KT600
512 MB Kingston Hyper X PC2700
Western Digital 40 Gig IDE Drive
Seagate 160 Gig SATA drive
nVidia GeForce FX 5700LE
if you get a grub menu screen then the kernel boots....or tries to U have a sata kernel or sata initrd issue.
lsmod gives me sata_via libata and I use a WD sata on a gigabyte board that uses via chipset
If your kernel has it compiled in U can still see it load via /var/log/dmesg and to be sure check /boot/config-kernel file search for via or your chipset
in the worse scenario U made need to start your system off in rescue mode then compile a kernel after chroot
How would I do a safemode boot in order to make fixes?
|All times are GMT -5. The time now is 07:50 AM.|