FC6 properly installed but, GRUB_ error on boot.
I am new to linux/fedora core, i was introduced to it at school and decided to install it on my computer.
BUT... Graphical Installation for FC6 will not work on my computer. Linux Text worked Says properly Installed but, GRUB_ on boot. nothing else. flahing _ I cannot access anything on my computer, i cannot even re-install windows because it says no harddrive found. |
Quote:
Most common error with Fedora installs, is Grub Error 17. I don't know why, but Fedora never has installed Grub right for me... If thats your error, do a search here, and/or Google Grub Error 17, and there should be a solution found.. IGF |
Well, first the Windows "no hd found" message is, most likely, because M$ is automatically ignoring partitions it doesn't understand. And, of course, M$ doesn't understand Linux. (On several different levels, eh?)
To fix you problem, boot from your Fedora installation medium, and use the "linux rescue" option at the first prompt. (Actually, if you're using the 4 CD set, I think you just boot the fourth CD.) That should locate your installed system, log you in as "root," and suggest that you use the command chroot /mnt/sysimage to switch to your installed system. Do that. First, to fix you boot problem, try re-installing GRUB. Just enter the command Code:
grub-install /dev/hda Code:
grub-install hd0 From your problem description, it seems to me that Fedora does not have a good driver for your video card. This is usually because the driver software has not been released under a GPL, and, by policy, Fedora will not distribute anything not under GPL. So, let's first see if we can get the correct video drivers installed. If your card is from nVida (e.g., GForce, etc.) or Raedon(e.g., ATI, FG, etc.), then the correct driver should be found in the livna repository. Note: The following asumes that you have a live, working, internet access. To add the linva repository to the YUM repository search, enter the following command: Code:
rpm -ivh http://rpm.livna.org/livna-release-6.rpm The most common video drivers are nVidia and Raedon (ATI). If you have an nVidia card, enter the command: Code:
yum install kmod-nvidia Code:
yum install kmod-fglrx Hope this helps. |
when i try and do
grub-install /dev/hda it wont work i tried sda1 both times comes up with /dev/sda1 does not have any corresponding BIOS drive?? i'm guessing that cant be good.. yum install-kmod nvidia worked fine, but startx still presented me with the same screen..which is basically nothing. any other suggestions for this :newbie: ?? |
How about #grub-install /dev/sda ??
|
Ok, so, i managed to get fedora to boot now, but to text mode. so i edited the inittab file to 5 instead of 3.
NOW MORE PROBLEMS it loads into graphics mode, but all that shows up on scree are vertical lines. i'm running a nvidia geforce 6800. anything special i need to do for this card? |
NEVERMIND, i guess i just had to wait for a long time ??
its working now. i'm never going to turn it off haha |
All times are GMT -5. The time now is 04:59 AM. |