Hi,
I need some help. I wish to setup a FC4 (64bit) installation which can be used as a firewall, router, webserver, and NAS. i will connect my cable modem thru a 100mb nix (red), and connect my personal lan thur a 1 gb nix (green). I've installed FC4 to the 40gb drive as hda, setup the four 400gb hard drives in software raid 5.
what i have got:
Aopen i945Pa-PLF
Intel Celeron D 351 Prescott 533MHz FSB 256KB L2 Cache LGA 775 EM64T Processor
4x
Seagate Barracuda 7200.9 ST3400633AS 400GB SATA2 7200RPM Hard Drive w/16MB Buffer
CORSAIR VALUE SELECT 1GB DDR2 667MHz
100mb nix and 40Gb hard drive out of storage.
i found this
http://www.fedoranews.org/ghenry/gateway/
but it is for a modem and a nix, i got two nix. i currently can get a ip address from a puter connected to the green nix, but no internet access.
my ifcfg-eth0:
DEVICE=eth0
BOOTPROTO=static
BROADCAST=192.168.1.255
HWADDR=00:01:80:62:7A:5A
IPADDR=192.168.1.2
NETMASK=255.255.255.0
NETWORK=192.168.1.0
ONBOOT=yes
TYPE=Ethernet
setup firewall/customize has a trusted device which is eth0, and masquerade deveces which is set to ?