LinuxQuestions.org

LinuxQuestions.org (/questions/)
-   Fedora (http://www.linuxquestions.org/questions/fedora-35/)
-   -   Dreaded "oh no! something went wrong" Message. I cant find the source of the problem (http://www.linuxquestions.org/questions/fedora-35/dreaded-oh-no-something-went-wrong-message-i-cant-find-the-source-of-the-problem-4175484471/)

KroniK 11-13-2013 01:12 PM

Dreaded "oh no! something went wrong" Message. I cant find the source of the problem
 
Hello,

Its been several days since I touched my fedora install and now it seems to be giving me this "Oh No! Something has gone wrong" message that is utterly useless.

If I use Ctrl+Alt+f2 I can get to a command prompt and log in. If I try to simply run "startx" it gives me the error again, only this time, I cant drop back to a shell, and instead have to reboot.

I have looked at /var/log/messages and the only things of any significance are as follows:

Code:

Nov 13 09:50:59 Daniel-PC systemd[1]: Starting GNOME Display Manager...
Nov 13 09:50:59 Daniel-PC systemd[1]: Started GNOME Display Manager.
Nov 13 09:50:59 Daniel-PC dbus[512]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.20" (uid=0 pid=1240 comm="/usr/sbin/gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.21" (uid=0 pid=1243 comm="/usr/libexec/gdm-simple-slave --display-id /org/gn")
Nov 13 09:50:59 Daniel-PC dbus-daemon[512]: dbus[512]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.20" (uid=0 pid=1240 comm="/usr/sbin/gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.21" (uid=0 pid=1243 comm="/usr/libexec/gdm-simple-slave --display-id /org/gn")
Nov 13 09:51:00 Daniel-PC systemd[1]: Started Wait for Plymouth Boot Screen to Quit.
Nov 13 09:51:00 Daniel-PC systemd[1]: Starting Multi-User System.
Nov 13 09:51:00 Daniel-PC systemd[1]: Reached target Multi-User System.
Nov 13 09:51:00 Daniel-PC systemd[1]: Starting Graphical Interface.
Nov 13 09:51:00 Daniel-PC systemd[1]: Reached target Graphical Interface.
Nov 13 09:51:00 Daniel-PC systemd[1]: Starting Update UTMP about System Runlevel Changes...
Nov 13 09:51:00 Daniel-PC systemd[1]: Starting Stop Read-Ahead Data Collection 10s After Completed Startup.
Nov 13 09:51:00 Daniel-PC systemd[1]: Started Stop Read-Ahead Data Collection 10s After Completed Startup.
Nov 13 09:51:00 Daniel-PC systemd[1]: Started Update UTMP about System Runlevel Changes.
Nov 13 09:51:00 Daniel-PC systemd[1]: Startup finished in 1.323s (kernel) + 2.438s (initrd) + 31.669s (userspace) = 35.432s.
Nov 13 09:51:00 Daniel-PC systemd-logind[493]: New session c1 of user gdm.
Nov 13 09:51:00 Daniel-PC systemd-logind[493]: Linked /tmp/.X11-unix/X0 to /run/user/42/X11-display.
Nov 13 09:51:01 Daniel-PC /usr/bin/dbus-launch[1275]: X Error of failed request:  BadWindow (invalid Window parameter)
Nov 13 09:51:01 Daniel-PC /usr/bin/dbus-launch[1275]: Major opcode of failed request:  153 (NV-GLX)
Nov 13 09:51:01 Daniel-PC /usr/bin/dbus-launch[1275]: Minor opcode of failed request:  4 ()
Nov 13 09:51:01 Daniel-PC /usr/bin/dbus-launch[1275]: Resource id in failed request:  0xc00003
Nov 13 09:51:01 Daniel-PC /usr/bin/dbus-launch[1275]: Serial number of failed request:  36
Nov 13 09:51:01 Daniel-PC /usr/bin/dbus-launch[1275]: Current serial number in output stream:  36
Nov 13 09:51:01 Daniel-PC /usr/bin/dbus-launch[1275]: gnome-session-check-accelerated: Helper exited with code 256
Nov 13 09:51:02 Daniel-PC NetworkManager[594]: <info> (p10p1): IP6 addrconf timed out or failed.
Nov 13 09:51:02 Daniel-PC NetworkManager[594]: <info> Activation (p10p1) Stage 4 of 5 (IPv6 Configure Timeout) scheduled...
Nov 13 09:51:02 Daniel-PC NetworkManager[594]: <info> Activation (p10p1) Stage 4 of 5 (IPv6 Configure Timeout) started...
Nov 13 09:51:02 Daniel-PC NetworkManager[594]: <info> Activation (p10p1) Stage 4 of 5 (IPv6 Configure Timeout) complete.
Nov 13 09:51:06 Daniel-PC /usr/bin/dbus-launch[1275]: X Error of failed request:  BadWindow (invalid Window parameter)
Nov 13 09:51:06 Daniel-PC /usr/bin/dbus-launch[1275]: Major opcode of failed request:  153 (NV-GLX)
Nov 13 09:51:06 Daniel-PC /usr/bin/dbus-launch[1275]: Minor opcode of failed request:  4 ()
Nov 13 09:51:06 Daniel-PC /usr/bin/dbus-launch[1275]: Resource id in failed request:  0xc00003
Nov 13 09:51:06 Daniel-PC /usr/bin/dbus-launch[1275]: Serial number of failed request:  36
Nov 13 09:51:06 Daniel-PC /usr/bin/dbus-launch[1275]: Current serial number in output stream:  36
Nov 13 09:51:06 Daniel-PC /usr/bin/dbus-launch[1275]: gnome-session-check-accelerated: Helper exited with code 256
Nov 13 09:51:06 Daniel-PC /usr/bin/dbus-launch[1275]: ** (process:1275): WARNING **: software acceleration check failed: Child process exited with code 1
Nov 13 09:51:30 Daniel-PC systemd[1]: Starting Stop Read-Ahead Data Collection...
Nov 13 09:51:30 Daniel-PC systemd[1]: Started Stop Read-Ahead Data Collection.
Nov 13 09:51:37 Daniel-PC systemd[1]: Starting Getty on tty2...
Nov 13 09:51:37 Daniel-PC systemd[1]: Started Getty on tty2.
Nov 13 09:51:54 Daniel-PC chronyd[483]: Selected source 198.58.100.237
Nov 13 09:54:06 Daniel-PC chronyd[483]: Selected source 206.209.110.2
Nov 13 09:54:26 Daniel-PC dbus-daemon[512]: dbus[512]: [system] Activating via systemd: service name='net.reactivated.Fprint' unit='fprintd.service'
Nov 13 09:54:26 Daniel-PC dbus[512]: [system] Activating via systemd: service name='net.reactivated.Fprint' unit='fprintd.service'
Nov 13 09:54:26 Daniel-PC systemd[1]: Starting Fingerprint Authentication Daemon...
Nov 13 09:54:26 Daniel-PC dbus-daemon[512]: dbus[512]: [system] Successfully activated service 'net.reactivated.Fprint'
Nov 13 09:54:26 Daniel-PC dbus[512]: [system] Successfully activated service 'net.reactivated.Fprint'
Nov 13 09:54:26 Daniel-PC systemd[1]: Started Fingerprint Authentication Daemon.
Nov 13 09:54:26 Daniel-PC fprintd[1302]: Launching FprintObject
Nov 13 09:54:26 Daniel-PC fprintd[1302]: ** Message: D-Bus service launched with name: net.reactivated.Fprint
Nov 13 09:54:26 Daniel-PC fprintd[1302]: ** Message: entering main loop

Being a newb at troubleshoting items like this, I have no idea which of those errors is causing the problem. I have googled all of them and it seems that the X failed at BadWindow is very common and seems to not actually cause any harm, and same thing with the dbus error at the top. The one that is a little more strange is the "software acceleration check failed: Child process exited with code 1." I Havent done much research on that one yet.

Also, here is my Xorg.conf

Code:

# RPM Fusion - nvidia-xorg.conf
#
Section "Device"
        Identifier  "Videocard0"
        Driver      "nvidia"
EndSection

# R.A.T 7 mouse

Section "InputClass"
        Identifier "R.A.T.7 Mouse Remap"
        MatchProduct "R.A.T.7 Mouse"
        MatchDevicePath "/dev/input/event*"
        Option "ButtonMapping" "1 2 3 4 5 0 0 8 9 7 6 12 0 0 0 16 17"
        Option "ZAxisMapping" "4 5 6 7"
        Option "AutoReleaseButtons" "13 14 15"
EndSection


KroniK 11-13-2013 01:12 PM

And here is my Xorg.0.log

Code:

[    33.606]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[    33.606] X Protocol Version 11, Revision 0
[    33.606] Build Operating System:  3.10.9-200.fc19.x86_64
[    33.606] Current Operating System: Linux Daniel-PC.NUSalaska.com 3.11.7-200.fc19.x86_64 #1 SMP Mon Nov 4 14:09:03 UTC 2013 x86_64
[    33.606] Kernel command line: BOOT_IMAGE=/vmlinuz-3.11.7-200.fc19.x86_64 root=/dev/mapper/fedora_daniel--pc-root ro rd.md=0 rd.dm=0 vconsole.keymap=us rd.lvm.lv=fedora_daniel-pc/root rd.luks=0 rd.lvm.lv=fedora_daniel-pc/swap vconsole.font=latarcyrheb-sun16 rhgb quiet LANG=en_US.UTF-8
[    33.606] Build Date: 23 October 2013  06:12:49AM
[    33.606] Build ID: xorg-x11-server 1.14.3-2.fc19
[    33.606] Current version of pixman: 0.30.0
[    33.606]        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    33.606] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    33.607] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Nov 13 09:50:58 2013
[    33.607] (==) Using config file: "/etc/X11/xorg.conf"
[    33.607] (==) Using config directory: "/etc/X11/xorg.conf.d"
[    33.607] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[    33.619] (==) No Layout section.  Using the first Screen section.
[    33.619] (==) No screen section available. Using defaults.
[    33.619] (**) |-->Screen "Default Screen Section" (0)
[    33.619] (**) |  |-->Monitor "<default monitor>"
[    33.620] (==) No device specified for screen "Default Screen Section".
        Using the first device section listed.
[    33.620] (**) |  |-->Device "Videocard0"
[    33.620] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    33.620] (==) Automatically adding devices
[    33.620] (==) Automatically enabling devices
[    33.620] (==) Automatically adding GPU devices
[    33.620] (**) FontPath set to:
        /usr/share/fonts/msttcore,
        catalogue:/etc/X11/fontpath.d,
        built-ins
[    33.620] (==) ModulePath set to "/usr/lib64/xorg/modules"
[    33.620] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
[    33.620] (II) Loader magic: 0x800d00
[    33.620] (II) Module ABI versions:
[    33.620]        X.Org ANSI C Emulation: 0.4
[    33.620]        X.Org Video Driver: 14.1
[    33.620]        X.Org XInput driver : 19.2
[    33.620]        X.Org Server Extension : 7.0
[    33.620] (II) xfree86: Adding drm device (/dev/dri/card0)
[    33.623] (--) PCI:*(0:1:0:0) 10de:0dc4:1462:2360 rev 161, Mem @ 0xf8000000/16777216, 0xd0000000/134217728, 0xdc000000/33554432, I/O @ 0x0000ef00/128, BIOS @ 0x????????/524288
[    33.623] Initializing built-in extension Generic Event Extension
[    33.623] Initializing built-in extension SHAPE
[    33.623] Initializing built-in extension MIT-SHM
[    33.623] Initializing built-in extension XInputExtension
[    33.623] Initializing built-in extension XTEST
[    33.623] Initializing built-in extension BIG-REQUESTS
[    33.623] Initializing built-in extension SYNC
[    33.623] Initializing built-in extension XKEYBOARD
[    33.624] Initializing built-in extension XC-MISC
[    33.624] Initializing built-in extension XINERAMA
[    33.624] Initializing built-in extension XFIXES
[    33.624] Initializing built-in extension RENDER
[    33.624] Initializing built-in extension RANDR
[    33.624] Initializing built-in extension COMPOSITE
[    33.624] Initializing built-in extension DAMAGE
[    33.624] Initializing built-in extension MIT-SCREEN-SAVER
[    33.624] Initializing built-in extension DOUBLE-BUFFER
[    33.624] Initializing built-in extension RECORD
[    33.624] Initializing built-in extension DPMS
[    33.624] Initializing built-in extension X-Resource
[    33.624] Initializing built-in extension XVideo
[    33.624] Initializing built-in extension XVideo-MotionCompensation
[    33.624] Initializing built-in extension SELinux
[    33.624] Initializing built-in extension XFree86-VidModeExtension
[    33.624] Initializing built-in extension XFree86-DGA
[    33.624] Initializing built-in extension XFree86-DRI
[    33.624] Initializing built-in extension DRI2
[    33.624] (II) "glx" will be loaded by default.
[    33.624] (II) LoadModule: "dri2"
[    33.624] (II) Module "dri2" already built-in
[    33.624] (II) LoadModule: "glamoregl"
[    33.636] (II) Loading /usr/lib64/xorg/modules/libglamoregl.so
[    33.851] (II) Module glamoregl: vendor="X.Org Foundation"
[    33.851]        compiled for 1.14.0, module version = 0.5.0
[    33.851]        ABI class: X.Org ANSI C Emulation, version 0.4
[    33.851] (II) LoadModule: "glx"
[    33.851] (II) Loading /usr/lib64/xorg/modules/extensions/libglx.so
[    33.853] (II) Module glx: vendor="X.Org Foundation"
[    33.853]        compiled for 1.14.3, module version = 1.0.0
[    33.853]        ABI class: X.Org Server Extension, version 7.0
[    33.853] (==) AIGLX enabled
[    33.853] Loading extension GLX
[    33.853] (II) LoadModule: "nvidia"
[    33.854] (II) Loading /usr/lib64/xorg/modules/drivers/nvidia_drv.so
[    33.931] (II) Module nvidia: vendor="NVIDIA Corporation"
[    33.931]        compiled for 4.0.2, module version = 1.0.0
[    33.931]        Module class: X.Org Video Driver
[    33.936] (II) NVIDIA dlloader X Driver  325.15  Wed Jul 31 17:50:57 PDT 2013
[    33.936] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[    33.936] (++) using VT number 1

[    33.941] (II) Loading sub module "fb"
[    33.941] (II) LoadModule: "fb"
[    33.941] (II) Loading /usr/lib64/xorg/modules/libfb.so
[    33.945] (II) Module fb: vendor="X.Org Foundation"
[    33.945]        compiled for 1.14.3, module version = 1.0.0
[    33.945]        ABI class: X.Org ANSI C Emulation, version 0.4
[    33.945] (WW) Unresolved symbol: fbGetGCPrivateKey
[    33.945] (II) Loading sub module "wfb"
[    33.945] (II) LoadModule: "wfb"
[    33.946] (II) Loading /usr/lib64/xorg/modules/libwfb.so
[    33.954] (II) Module wfb: vendor="X.Org Foundation"
[    33.954]        compiled for 1.14.3, module version = 1.0.0
[    33.954]        ABI class: X.Org ANSI C Emulation, version 0.4
[    33.954] (II) Loading sub module "shadow"
[    33.954] (II) LoadModule: "shadow"
[    33.955] (II) Loading /usr/lib64/xorg/modules/libshadow.so
[    33.958] (II) Module shadow: vendor="X.Org Foundation"
[    33.958]        compiled for 1.14.3, module version = 1.1.0
[    33.958]        ABI class: X.Org ANSI C Emulation, version 0.4
[    33.958] (II) Loading sub module "ramdac"
[    33.958] (II) LoadModule: "ramdac"
[    33.958] (II) Module "ramdac" already built-in
[    33.963] (II) NVIDIA(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    33.963] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[    33.963] (==) NVIDIA(0): RGB weight 888
[    33.963] (==) NVIDIA(0): Default visual is TrueColor
[    33.963] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[    33.964] (**) NVIDIA(0): Enabling 2D acceleration
[    33.964] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[    33.964] (EE) NVIDIA(0):    log file that the GLX module has been loaded in your X
[    33.964] (EE) NVIDIA(0):    server, and that the module is the NVIDIA GLX module.  If
[    33.964] (EE) NVIDIA(0):    you continue to encounter problems, Please try
[    33.964] (EE) NVIDIA(0):    reinstalling the NVIDIA driver.
[    34.592] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[    34.662] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-0)) does not support NVIDIA
[    34.662] (II) NVIDIA(GPU-0):    3D Vision stereo.
[    34.692] (II) NVIDIA(GPU-0): Display (SAMSUNG (DFP-1)) does not support NVIDIA 3D Vision
[    34.692] (II) NVIDIA(GPU-0):    stereo.
[    34.693] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 450 (GF106) at PCI:1:0:0 (GPU-0)
[    34.693] (--) NVIDIA(0): Memory: 1048576 kBytes
[    34.693] (--) NVIDIA(0): VideoBIOS: 70.06.1f.00.00
[    34.693] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[    34.700] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 450 at PCI:1:0:0
[    34.700] (--) NVIDIA(0):    CRT-0
[    34.700] (--) NVIDIA(0):    CRT-1
[    34.700] (--) NVIDIA(0):    Samsung SyncMaster (DFP-0) (boot, connected)
[    34.700] (--) NVIDIA(0):    SAMSUNG (DFP-1) (connected)
[    34.700] (--) NVIDIA(0):    DFP-2
[    34.700] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
[    34.700] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
[    34.700] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): 330.0 MHz maximum pixel clock
[    34.700] (--) NVIDIA(0): Samsung SyncMaster (DFP-0): Internal Dual Link TMDS
[    34.700] (--) NVIDIA(0): SAMSUNG (DFP-1): 165.0 MHz maximum pixel clock
[    34.700] (--) NVIDIA(0): SAMSUNG (DFP-1): Internal Single Link TMDS
[    34.700] (--) NVIDIA(0): DFP-2: 330.0 MHz maximum pixel clock
[    34.700] (--) NVIDIA(0): DFP-2: Internal Single Link TMDS
[    34.701] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    34.701] (**) NVIDIA(0):    device Samsung SyncMaster (DFP-0) (Using EDID frequencies
[    34.701] (**) NVIDIA(0):    has been enabled on all display devices.)
[    34.703] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[    34.703] (**) NVIDIA(0):    device SAMSUNG (DFP-1) (Using EDID frequencies has been
[    34.703] (**) NVIDIA(0):    enabled on all display devices.)
[    34.705] (==) NVIDIA(0):
[    34.705] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[    34.705] (==) NVIDIA(0):    will be used as the requested mode.
[    34.705] (==) NVIDIA(0):
[    34.705] (II) NVIDIA(0): Validated MetaModes:
[    34.705] (II) NVIDIA(0):    "DFP-0:nvidia-auto-select{},DFP-1:nvidia-auto-select{}"
[    34.705] (II) NVIDIA(0): Virtual screen size determined to be 2800 x 900
[    34.735] (--) NVIDIA(0): DPI set to (89, 87); computed from "UseEdidDpi" X config
[    34.735] (--) NVIDIA(0):    option
[    34.735] (--) Depth 24 pixmap format is 32 bpp
[    34.735] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[    34.736] (II) NVIDIA:    access.
[    34.745] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[    34.745] (II) NVIDIA(0):    may not be running or the "AcpidSocketPath" X
[    34.745] (II) NVIDIA(0):    configuration option may not be set correctly.  When the
[    34.745] (II) NVIDIA(0):    ACPI event daemon is available, the NVIDIA X driver will
[    34.745] (II) NVIDIA(0):    try to use it to receive ACPI event notifications.  For
[    34.745] (II) NVIDIA(0):    details, please see the "ConnectToAcpid" and
[    34.745] (II) NVIDIA(0):    "AcpidSocketPath" X configuration options in Appendix B: X
[    34.745] (II) NVIDIA(0):    Config Options in the README.
[    34.750] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{},DFP-1:nvidia-auto-select{}"
[    34.843] Loading extension NV-GLX
[    34.938] (==) NVIDIA(0): Disabling shared memory pixmaps
[    34.938] (==) NVIDIA(0): Backing store disabled
[    34.938] (==) NVIDIA(0): Silken mouse enabled
[    34.938] (==) NVIDIA(0): DPMS enabled
[    34.938] Loading extension NV-CONTROL
[    34.938] Loading extension XINERAMA
[    34.938] (II) Loading sub module "dri2"
[    34.938] (II) LoadModule: "dri2"
[    34.938] (II) Module "dri2" already built-in
[    34.938] (II) NVIDIA(0): [DRI2] Setup complete
[    34.938] (II) NVIDIA(0): [DRI2]  VDPAU driver: nvidia
[    34.938] (--) RandR disabled
[    34.943] (II) SELinux: Disabled by boolean
[    34.943] (II) AIGLX: Screen 0 is not DRI2 capable
[    34.943] (II) AIGLX: Screen 0 is not DRI capable
[    35.217] (II) AIGLX: Loaded and initialized swrast
[    35.217] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[    35.218] [dix] Could not init font path element /usr/share/fonts/msttcore, removing from list!
[    35.298] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[    35.298] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    35.298] (**) Power Button: Applying InputClass "system-keyboard"
[    35.298] (II) LoadModule: "evdev"
[    35.298] (II) Loading /usr/lib64/xorg/modules/input/evdev_drv.so
[    35.299] (II) Module evdev: vendor="X.Org Foundation"
[    35.299]        compiled for 1.14.2, module version = 2.8.1
[    35.299]        Module class: X.Org XInput Driver
[    35.299]        ABI class: X.Org XInput driver, version 19.1
[    35.299] (II) Using input driver 'evdev' for 'Power Button'
[    35.299] (**) Power Button: always reports core events
[    35.299] (**) evdev: Power Button: Device: "/dev/input/event1"
[    35.299] (--) evdev: Power Button: Vendor 0 Product 0x1
[    35.299] (--) evdev: Power Button: Found keys
[    35.299] (II) evdev: Power Button: Configuring as keyboard
[    35.299] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[    35.299] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[    35.299] (**) Option "xkb_rules" "evdev"
[    35.299] (**) Option "xkb_model" "pc104"
[    35.299] (**) Option "xkb_layout" "us"
[    35.340] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[    35.341] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[    35.341] (**) Power Button: Applying InputClass "system-keyboard"
[    35.341] (II) Using input driver 'evdev' for 'Power Button'
[    35.341] (**) Power Button: always reports core events
[    35.341] (**) evdev: Power Button: Device: "/dev/input/event0"
[    35.341] (--) evdev: Power Button: Vendor 0 Product 0x1
[    35.341] (--) evdev: Power Button: Found keys
[    35.341] (II) evdev: Power Button: Configuring as keyboard
[    35.341] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[    35.341] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[    35.341] (**) Option "xkb_rules" "evdev"
[    35.341] (**) Option "xkb_model" "pc104"
[    35.341] (**) Option "xkb_layout" "us"
[    35.342] (II) config/udev: Adding drm device (/dev/dri/card0)
[    35.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[    35.343] (II) No input driver specified, ignoring this device.
[    35.343] (II) This device may have been added with another device file.
[    35.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[    35.343] (II) No input driver specified, ignoring this device.
[    35.343] (II) This device may have been added with another device file.
[    35.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[    35.343] (II) No input driver specified, ignoring this device.
[    35.343] (II) This device may have been added with another device file.
[    35.343] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[    35.343] (II) No input driver specified, ignoring this device.
[    35.343] (II) This device may have been added with another device file.
[    35.343] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event2)
[    35.343] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[    35.343] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[    35.343] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[    35.343] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[    35.343] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event2"
[    35.343] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[    35.343] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[    35.343] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[    35.344] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.0/input/input2/event2"
[    35.344] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 8)
[    35.344] (**) Option "xkb_rules" "evdev"
[    35.344] (**) Option "xkb_model" "pc104"
[    35.344] (**) Option "xkb_layout" "us"
[    35.344] (II) config/udev: Adding input device Logitech Logitech Illuminated Keyboard (/dev/input/event3)
[    35.344] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "evdev keyboard catchall"
[    35.344] (**) Logitech Logitech Illuminated Keyboard: Applying InputClass "system-keyboard"
[    35.344] (II) Using input driver 'evdev' for 'Logitech Logitech Illuminated Keyboard'
[    35.344] (**) Logitech Logitech Illuminated Keyboard: always reports core events
[    35.344] (**) evdev: Logitech Logitech Illuminated Keyboard: Device: "/dev/input/event3"
[    35.344] (--) evdev: Logitech Logitech Illuminated Keyboard: Vendor 0x46d Product 0xc318
[    35.344] (--) evdev: Logitech Logitech Illuminated Keyboard: Found 1 mouse buttons
[    35.344] (--) evdev: Logitech Logitech Illuminated Keyboard: Found scroll wheel(s)
[    35.344] (--) evdev: Logitech Logitech Illuminated Keyboard: Found relative axes
[    35.344] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing relative x/y axes to exist.
[    35.344] (--) evdev: Logitech Logitech Illuminated Keyboard: Found absolute axes
[    35.344] (II) evdev: Logitech Logitech Illuminated Keyboard: Forcing absolute x/y axes to exist.
[    35.344] (--) evdev: Logitech Logitech Illuminated Keyboard: Found keys
[    35.344] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as mouse
[    35.344] (II) evdev: Logitech Logitech Illuminated Keyboard: Configuring as keyboard
[    35.344] (II) evdev: Logitech Logitech Illuminated Keyboard: Adding scrollwheel support
[    35.344] (**) evdev: Logitech Logitech Illuminated Keyboard: YAxisMapping: buttons 4 and 5
[    35.344] (**) evdev: Logitech Logitech Illuminated Keyboard: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    35.344] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-1/3-1:1.1/input/input3/event3"
[    35.344] (II) XINPUT: Adding extended input device "Logitech Logitech Illuminated Keyboard" (type: KEYBOARD, id 9)
[    35.344] (**) Option "xkb_rules" "evdev"
[    35.344] (**) Option "xkb_model" "pc104"
[    35.344] (**) Option "xkb_layout" "us"
[    35.344] (II) evdev: Logitech Logitech Illuminated Keyboard: initialized for relative axes.
[    35.344] (WW) evdev: Logitech Logitech Illuminated Keyboard: ignoring absolute axes.
[    35.345] (**) Logitech Logitech Illuminated Keyboard: (accel) keeping acceleration scheme 1
[    35.345] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration profile 0
[    35.345] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration factor: 2.000
[    35.345] (**) Logitech Logitech Illuminated Keyboard: (accel) acceleration threshold: 4
[    35.345] (II) config/udev: Adding input device Saitek Cyborg R.A.T.7 Mouse (/dev/input/event4)
[    35.345] (**) Saitek Cyborg R.A.T.7 Mouse: Applying InputClass "evdev pointer catchall"
[    35.345] (**) Saitek Cyborg R.A.T.7 Mouse: Applying InputClass "R.A.T.7 Mouse Remap"
[    35.345] (II) Using input driver 'evdev' for 'Saitek Cyborg R.A.T.7 Mouse'
[    35.345] (**) Saitek Cyborg R.A.T.7 Mouse: always reports core events
[    35.345] (**) evdev: Saitek Cyborg R.A.T.7 Mouse: Device: "/dev/input/event4"
[    35.345] (**) evdev: Saitek Cyborg R.A.T.7 Mouse: ButtonMapping '1 2 3 4 5 0 0 8 9 7 6 12 0 0 0 16 17'
[    35.345] (--) evdev: Saitek Cyborg R.A.T.7 Mouse: Vendor 0x6a3 Product 0xccb
[    35.345] (--) evdev: Saitek Cyborg R.A.T.7 Mouse: Found 17 mouse buttons
[    35.345] (--) evdev: Saitek Cyborg R.A.T.7 Mouse: Found scroll wheel(s)
[    35.345] (--) evdev: Saitek Cyborg R.A.T.7 Mouse: Found relative axes
[    35.345] (--) evdev: Saitek Cyborg R.A.T.7 Mouse: Found x and y relative axes
[    35.345] (II) evdev: Saitek Cyborg R.A.T.7 Mouse: Configuring as mouse
[    35.345] (II) evdev: Saitek Cyborg R.A.T.7 Mouse: Adding scrollwheel support
[    35.345] (**) evdev: Saitek Cyborg R.A.T.7 Mouse: YAxisMapping: buttons 4 and 5
[    35.345] (**) evdev: Saitek Cyborg R.A.T.7 Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[    35.345] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input4/event4"
[    35.345] (II) XINPUT: Adding extended input device "Saitek Cyborg R.A.T.7 Mouse" (type: MOUSE, id 10)
[    35.345] (II) evdev: Saitek Cyborg R.A.T.7 Mouse: initialized for relative axes.
[    35.345] (**) Saitek Cyborg R.A.T.7 Mouse: (accel) keeping acceleration scheme 1
[    35.345] (**) Saitek Cyborg R.A.T.7 Mouse: (accel) acceleration profile 0
[    35.345] (**) Saitek Cyborg R.A.T.7 Mouse: (accel) acceleration factor: 2.000
[    35.345] (**) Saitek Cyborg R.A.T.7 Mouse: (accel) acceleration threshold: 4
[    35.345] (II) config/udev: Adding input device Saitek Cyborg R.A.T.7 Mouse (/dev/input/mouse0)
[    35.345] (II) No input driver specified, ignoring this device.
[    35.345] (II) This device may have been added with another device file.
[    35.346] (II) config/udev: Adding input device HDA ATI SB Line (/dev/input/event10)
[    35.346] (II) No input driver specified, ignoring this device.
[    35.346] (II) This device may have been added with another device file.
[    35.346] (II) config/udev: Adding input device HDA ATI SB Rear Mic (/dev/input/event11)
[    35.346] (II) No input driver specified, ignoring this device.
[    35.346] (II) This device may have been added with another device file.
[    35.346] (II) config/udev: Adding input device HDA ATI SB Front Mic (/dev/input/event12)
[    35.346] (II) No input driver specified, ignoring this device.
[    35.346] (II) This device may have been added with another device file.
[    35.346] (II) config/udev: Adding input device HDA ATI SB Front Headphone (/dev/input/event5)
[    35.346] (II) No input driver specified, ignoring this device.
[    35.346] (II) This device may have been added with another device file.
[    35.346] (II) config/udev: Adding input device HDA ATI SB Line Out Side (/dev/input/event6)
[    35.346] (II) No input driver specified, ignoring this device.
[    35.346] (II) This device may have been added with another device file.
[    35.347] (II) config/udev: Adding input device HDA ATI SB Line Out CLFE (/dev/input/event7)
[    35.347] (II) No input driver specified, ignoring this device.
[    35.347] (II) This device may have been added with another device file.
[    35.347] (II) config/udev: Adding input device HDA ATI SB Line Out Surround (/dev/input/event8)
[    35.347] (II) No input driver specified, ignoring this device.
[    35.347] (II) This device may have been added with another device file.
[    35.347] (II) config/udev: Adding input device HDA ATI SB Line Out Front (/dev/input/event9)
[    35.347] (II) No input driver specified, ignoring this device.
[    35.347] (II) This device may have been added with another device file.

To Clarify, I have done alot of looking into this problem. I seem to be of the variaty that gets this "oh no" message before ever being able to login so anything to do with a user seems to be out of the question. Anyway, anones help would be appreciated.

Also, I have no Idea what I might have done to cause this problem (and part of why its so dificult to figure out what might have caused this).

KroniK 11-13-2013 01:40 PM

Another Update. I have tried completely reinstalling Gnome using "yum install @gnome-desktop" and that has not helped. Im abou to try reinstalling X the same way.

wmakowski 11-29-2013 09:05 AM

Quote:

[ 33.964] (EE) NVIDIA(0): Failed to initialize the GLX module; please check in your X
[ 33.964] (EE) NVIDIA(0): log file that the GLX module has been loaded in your X
[ 33.964] (EE) NVIDIA(0): server, and that the module is the NVIDIA GLX module. If
[ 33.964] (EE) NVIDIA(0): you continue to encounter problems, Please try
[ 33.964] (EE) NVIDIA(0): reinstalling the NVIDIA driver.
This looks to be the source of your issues. Most likely a problem with how you installed the nvidia packages.

Bill


All times are GMT -5. The time now is 11:06 AM.