LinuxQuestions.org
Welcome to the most active Linux Forum on the web.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Fedora
User Name
Password
Fedora This forum is for the discussion of the Fedora Project.

Notices

Reply
 
Search this Thread
Old 12-15-2003, 08:35 PM   #1
pk108
Member
 
Registered: Nov 2003
Location: Shelton, WA
Distribution: Fedora 10
Posts: 31

Rep: Reputation: 15
Can't setup Printer--CUPS


I just installed Fedora 1 including my Lexmark 1020 inkjet. The printer installation seems fine except that I can't print a test page. I set the cups error log to debug2 and the part of the results are below. There are some I/O errors mentioned but as a linux newbie I can't really figure any of this out. Can someone tell me what the problem might be by looking at this output?



Quote:
D [15/Dec/2003:21:05:00 -0500] [Job 6] ================================================
D [15/Dec/2003:21:05:00 -0500] [Job 6]
D [15/Dec/2003:21:05:00 -0500] [Job 6] Reading PostScript input ...
D [15/Dec/2003:21:05:00 -0500] [Job 6] --> This document is DSC-conforming!
D [15/Dec/2003:21:05:00 -0500] [Job 6]
D [15/Dec/2003:21:05:00 -0500] [Job 6] -----------
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found: %%BeginProlog
D [15/Dec/2003:21:05:00 -0500] [Job 6] 0 %%EOF
D [15/Dec/2003:21:05:00 -0500] [Job 6] Saw EOF!
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found: %%EndProlog
D [15/Dec/2003:21:05:00 -0500] [Job 6]
D [15/Dec/2003:21:05:00 -0500] [Job 6] -----------
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found: %%BeginSetup
D [15/Dec/2003:21:05:00 -0500] [Job 6] Inserting PostScript code for CUPS' page accounting
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found: %%BeginFeature: *InkType Color
D [15/Dec/2003:21:05:00 -0500] [Job 6] Option: InkType=Color --> Setting option
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found: %% FoomaticRIPOptionSetting: InkType=Color
D [15/Dec/2003:21:05:00 -0500] [Job 6] Option: InkType=Color --> Setting option
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found: %%BeginFeature: *PageSize Letter
D [15/Dec/2003:21:05:00 -0500] [Job 6] Option: PageSize=Letter --> Option will be set by PostScript interpreter
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found: %%BeginFeature: *Brightness 100
D [15/Dec/2003:21:05:00 -0500] [Job 6] Option: Brightness=100 --> Setting option
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found: %% FoomaticRIPOptionSetting: Brightness=100
D [15/Dec/2003:21:05:00 -0500] [Job 6] Option: Brightness=100 --> Setting option
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found: %%EndSetup
D [15/Dec/2003:21:05:00 -0500] [Job 6]
D [15/Dec/2003:21:05:00 -0500] [Job 6] -----------
D [15/Dec/2003:21:05:00 -0500] [Job 6] New page: 1 1
D [15/Dec/2003:21:05:00 -0500] [Job 6] Inserting option code into "PageSetup" section.
D [15/Dec/2003:21:05:00 -0500] [Job 6] No page header or page header not DSC-conforming
d [15/Dec/2003:21:05:00 -0500] PID 2499 exited with no errors.
D [15/Dec/2003:21:05:00 -0500] [Job 6] Stopping search for page header options
D [15/Dec/2003:21:05:00 -0500] [Job 6] Found:
D [15/Dec/2003:21:05:00 -0500] [Job 6] pageHeight sub % Move down...
D [15/Dec/2003:21:05:00 -0500] [Job 6] --> Output goes directly to the renderer now.
D [15/Dec/2003:21:05:00 -0500] [Job 6]
D [15/Dec/2003:21:05:00 -0500] [Job 6]
D [15/Dec/2003:21:05:00 -0500] [Job 6] Starting renderer
D [15/Dec/2003:21:05:00 -0500] [Job 6] JCL: <job data>
D [15/Dec/2003:21:05:00 -0500] [Job 6]
D [15/Dec/2003:21:05:00 -0500] [Job 6] renderer PID pid4=2503
D [15/Dec/2003:21:05:00 -0500] [Job 6] renderer command: gs -q -sDEVICE=ppmraw -r300 -dBATCH -dNOPAUSE -dPARANOIDSAFER -sOutputFile=- - | lm1100 -b 100 -
D [15/Dec/2003:21:05:00 -0500] [Job 6] sh: line 1: lm1100: command not found
D [15/Dec/2003:21:05:00 -0500] [Job 6] foomatic-gswrapper: gs '-sDEVICE=ppmraw' '-r300' '-dBATCH' '-dNOPAUSE' '-dPARANOIDSAFER' '-sOutputFile=| cat >&3' '/dev/fd/0' 3>&1 1>&2
D [15/Dec/2003:21:05:00 -0500] [Job 6] GNU Ghostscript 7.07 (2003-05-17)
D [15/Dec/2003:21:05:00 -0500] [Job 6] Copyright (C) 2003 artofcode LLC, Benicia, CA. All rights reserved.
D [15/Dec/2003:21:05:00 -0500] [Job 6] This software comes with NO WARRANTY: see the file PUBLIC for details.
D [15/Dec/2003:21:05:01 -0500] [Job 6] Loading NimbusRomNo9L-Regu font from /usr/share/fonts/default/Type1/n021003l.pfb... 2431844 1071589 1662616 356238 0 done.
D [15/Dec/2003:21:05:01 -0500] [Job 6] Loading NimbusSanL-Regu font from /usr/share/fonts/default/Type1/n019003l.pfb... 2806804 1388109 1682712 367446 0 done.
D [15/Dec/2003:21:05:01 -0500] [Job 6] Loading NimbusSanL-Bold font from /usr/share/fonts/default/Type1/n019004l.pfb... 3071200 1586500 1722904 402221 0 done.
D [15/Dec/2003:21:05:01 -0500] [Job 6] Flushing FIFO.
D [15/Dec/2003:21:05:01 -0500] [Job 6]
D [15/Dec/2003:21:05:01 -0500] [Job 6] Closing renderer
D [15/Dec/2003:21:05:02 -0500] [Job 6] Loading NimbusSanL-BoldItal font from /usr/share/fonts/default/Type1/n019024l.pfb... 3188344 1693249 1743000 420880 0 done.
D [15/Dec/2003:21:05:02 -0500] [Job 6] cat: write error: Broken pipe
D [15/Dec/2003:21:05:02 -0500] [Job 6] Error: /ioerror in --.outputpage--
D [15/Dec/2003:21:05:02 -0500] [Job 6] Operand stack:
D [15/Dec/2003:21:05:02 -0500] [Job 6] 416.5 308.0 306.0 748.0 306.0 55.0 51.0 1 true
D [15/Dec/2003:21:05:02 -0500] [Job 6] Execution stack:
D [15/Dec/2003:21:05:02 -0500] [Job 6] %interp_exit .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- --nostringval-- --nostringval-- false 1 %stopped_push 1 3 %oparray_pop 1 3 %oparray_pop 1 3 %oparray_pop 1 3 %oparray_pop .runexec2 --nostringval-- --nostringval-- --nostringval-- 2 %stopped_push --nostringval-- 7 3 %oparray_pop --nostringval-- --nostringval-- --nostringval-- --nostringval--
D [15/Dec/2003:21:05:02 -0500] [Job 6] Dictionary stack:
D [15/Dec/2003:21:05:02 -0500] [Job 6] --dict:1073/1123(ro)(G)-- --dict:0/20(G)-- --dict:114/200(L)--
D [15/Dec/2003:21:05:02 -0500] [Job 6] Current allocation mode is local
D [15/Dec/2003:21:05:02 -0500] [Job 6] Last OS error: 32
D [15/Dec/2003:21:05:02 -0500] [Job 6] GNU Ghostscript 7.07: Unrecoverable error, exit code 1
D [15/Dec/2003:21:05:02 -0500] [Job 6] renderer return value: 127
D [15/Dec/2003:21:05:02 -0500] [Job 6] renderer received signal: 127
D [15/Dec/2003:21:05:02 -0500] [Job 6] KID3 exited with status 1
D [15/Dec/2003:21:05:02 -0500] [Job 6] Renderer exit stat: 1
D [15/Dec/2003:21:05:02 -0500] [Job 6] Process dieing with "The renderer command line returned an unrecognized error code 127.", exit stat: 1
D [15/Dec/2003:21:05:02 -0500] [Job 6] The renderer command line returned an unrecognized error code 127.
D [15/Dec/2003:21:05:02 -0500] [Job 6] tail process done writing data to STDOUT
D [15/Dec/2003:21:05:02 -0500] [Job 6] KID4 finished
D [15/Dec/2003:21:05:02 -0500] [Job 6] Renderer process finished
D [15/Dec/2003:21:05:02 -0500] [Job 6] Process dieing with "Error closing renderer", exit stat: 1
D [15/Dec/2003:21:05:02 -0500] [Job 6] Error closing renderer
E [15/Dec/2003:21:05:02 -0500] PID 2500 stopped with status 1!
d [15/Dec/2003:21:05:02 -0500] PID 2501 exited with no errors.
I [15/Dec/2003:21:05:02 -0500] [Job 6] Ready to print.
D [15/Dec/2003:21:05:02 -0500] UpdateJob: job 6, file 0 is complete.
d [15/Dec/2003:21:05:02 -0500] UpdateJob: Removing fd 8 from InputSet...
D [15/Dec/2003:21:05:02 -0500] CancelJob: id = 6
D [15/Dec/2003:21:05:02 -0500] StopJob: id = 6, force = 0
D [15/Dec/2003:21:05:02 -0500] StopJob: printer state is 3
d [15/Dec/2003:21:05:02 -0500] StopJob: Freeing status buffer...
d [15/Dec/2003:21:05:02 -0500] SaveJob: Closing file 8...
d [15/Dec/2003:21:05:02 -0500] SaveJob: Closing file 8...
d [15/Dec/2003:21:05:02 -0500] ReadClient() 9, used=0
D [15/Dec/2003:21:05:02 -0500] ReadClient() 9 POST / HTTP/1.1
d [15/Dec/2003:21:05:02 -0500] decode_auth(0xbf228008): Authorization string = ""
d [15/Dec/2003:21:05:02 -0500] decode_auth() 9 username=""
d [15/Dec/2003:21:05:02 -0500] IsAuthorized: con->uri = "/"
d [15/Dec/2003:21:05:02 -0500] FindBest: uri = "/"...
d [15/Dec/2003:21:05:02 -0500] FindBest: Location /admin Limit 7f
d [15/Dec/2003:21:05:02 -0500] FindBest: Location /printers/printer Limit 7f
d [15/Dec/2003:21:05:02 -0500] FindBest: Location / Limit 7f
d [15/Dec/2003:21:05:02 -0500] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [15/Dec/2003:21:05:02 -0500] FindBest: best = "/"
d [15/Dec/2003:21:05:02 -0500] IsAuthorized: auth = 0, satisfy=0...
d [15/Dec/2003:21:05:02 -0500] POST /
d [15/Dec/2003:21:05:02 -0500] CONTENT_TYPE = application/ipp
d [15/Dec/2003:21:05:02 -0500] ReadClient() 9 con->data_encoding = length, con->data_remaining = 220, con->file = 0
d [15/Dec/2003:21:05:02 -0500] ProcessIPPRequest(0xbf228008[9]): operation_id = 000a
d [15/Dec/2003:21:05:02 -0500] get_jobs(0xbf228008[9], ipp://localhost/jobs/)
d [15/Dec/2003:21:05:02 -0500] get_jobs: job->id = 5
d [15/Dec/2003:21:05:02 -0500] get_jobs: job->id = 6
D [15/Dec/2003:21:05:02 -0500] ProcessIPPRequest: 9 status_code=1
d [15/Dec/2003:21:05:02 -0500] ProcessIPPRequest: Adding fd 9 to OutputSet...
d [15/Dec/2003:21:05:02 -0500] WriteClient: Removing fd 9 from OutputSet...
d [15/Dec/2003:21:07:07 -0500] DeleteCert: removing certificate for pid 0
d [15/Dec/2003:21:07:07 -0500] AddCert: adding certificate for pid 0
d [15/Dec/2003:21:08:22 -0500] AcceptClient(0x8a7dd20) 0 NumClients = 1
D [15/Dec/2003:21:08:22 -0500] AcceptClient() 8 from localhost:631.
d [15/Dec/2003:21:08:22 -0500] AcceptClient: Adding fd 8 to InputSet...
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8, used=0
D [15/Dec/2003:21:08:22 -0500] ReadClient() 8 POST /printers/ HTTP/1.1
d [15/Dec/2003:21:08:22 -0500] decode_auth(0xbf22aa34): Authorization string = ""
d [15/Dec/2003:21:08:22 -0500] decode_auth() 8 username=""
d [15/Dec/2003:21:08:22 -0500] IsAuthorized: con->uri = "/printers/"
d [15/Dec/2003:21:08:22 -0500] FindBest: uri = "/printers/"...
d [15/Dec/2003:21:08:22 -0500] FindBest: Location /admin Limit 7f
d [15/Dec/2003:21:08:22 -0500] FindBest: Location /printers/printer Limit 7f
d [15/Dec/2003:21:08:22 -0500] FindBest: Location / Limit 7f
d [15/Dec/2003:21:08:22 -0500] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [15/Dec/2003:21:08:22 -0500] FindBest: best = "/"
d [15/Dec/2003:21:08:22 -0500] IsAuthorized: auth = 0, satisfy=0...
d [15/Dec/2003:21:08:22 -0500] POST /printers/
d [15/Dec/2003:21:08:22 -0500] CONTENT_TYPE = application/ipp
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 175, con->file = 0
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8, used=0
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 167, con->file = 0
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8, used=0
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 138, con->file = 0
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8, used=0
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 101, con->file = 0
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8, used=63
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 64, con->file = 0
d [15/Dec/2003:21:08:22 -0500] ProcessIPPRequest(0xbf22aa34[8]): operation_id = 4002
d [15/Dec/2003:21:08:22 -0500] get_printers(0xbf22aa34[8], 0)
d [15/Dec/2003:21:08:22 -0500] add_printer_state_reasons(0xbf22aa34[8], 0x8a7e380[printer])
d [15/Dec/2003:21:08:22 -0500] add_queued_job_count(0xbf22aa34[8], 0x8a7e380[printer])
d [15/Dec/2003:21:08:22 -0500] copy_attrs(0x8a85188, 0x8a68908, 0x8a85098, 0)
d [15/Dec/2003:21:08:22 -0500] copy_attribute(0x8a85188, 0x8a68a78[printer-name,4,42])
d [15/Dec/2003:21:08:22 -0500] copy_attribute(0x8a85188, 0x8a68d20[device-uri,4,45])
d [15/Dec/2003:21:08:22 -0500] copy_attrs(0x8a85188, 0x8a77978, 0x8a85098, 0)
D [15/Dec/2003:21:08:22 -0500] ProcessIPPRequest: 8 status_code=1
d [15/Dec/2003:21:08:22 -0500] ProcessIPPRequest: Adding fd 8 to OutputSet...
d [15/Dec/2003:21:08:22 -0500] WriteClient: Removing fd 8 from OutputSet...
d [15/Dec/2003:21:08:22 -0500] ReadClient() 8, used=0
D [15/Dec/2003:21:08:22 -0500] CloseClient() 8
d [15/Dec/2003:21:08:22 -0500] CloseClient: Removing fd 8 from InputSet and OutputSet...
D [15/Dec/2003:21:10:03 -0500] Closing client 9 after 300 seconds of inactivity...
D [15/Dec/2003:21:10:03 -0500] CloseClient() 9
d [15/Dec/2003:21:10:03 -0500] CloseClient: Removing fd 9 from InputSet and OutputSet...
d [15/Dec/2003:21:11:18 -0500] AcceptClient(0x8a7dd20) 0 NumClients = 0
D [15/Dec/2003:21:11:18 -0500] AcceptClient() 8 from localhost:631.
d [15/Dec/2003:21:11:18 -0500] AcceptClient: Adding fd 8 to InputSet...
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8, used=0
D [15/Dec/2003:21:11:18 -0500] ReadClient() 8 POST / HTTP/1.1
d [15/Dec/2003:21:11:18 -0500] decode_auth(0xbf228008): Authorization string = ""
d [15/Dec/2003:21:11:18 -0500] decode_auth() 8 username=""
d [15/Dec/2003:21:11:18 -0500] IsAuthorized: con->uri = "/"
d [15/Dec/2003:21:11:18 -0500] FindBest: uri = "/"...
d [15/Dec/2003:21:11:18 -0500] FindBest: Location /admin Limit 7f
d [15/Dec/2003:21:11:18 -0500] FindBest: Location /printers/printer Limit 7f
d [15/Dec/2003:21:11:18 -0500] FindBest: Location / Limit 7f
d [15/Dec/2003:21:11:18 -0500] FindBest: Location CUPS_INTERNAL_BROWSE_ACL Limit 0
d [15/Dec/2003:21:11:18 -0500] FindBest: best = "/"
d [15/Dec/2003:21:11:18 -0500] IsAuthorized: auth = 0, satisfy=0...
d [15/Dec/2003:21:11:18 -0500] POST /
d [15/Dec/2003:21:11:18 -0500] CONTENT_TYPE = application/ipp
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 218, con->file = 0
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8, used=0
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 210, con->file = 0
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8, used=0
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 181, con->file = 0
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8, used=0
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 138, con->file = 0
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8, used=0
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 111, con->file = 0
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8, used=33
d [15/Dec/2003:21:11:18 -0500] ReadClient() 8 con->data_encoding = length, con->data_remaining = 80, con->file = 0
d [15/Dec/2003:21:11:18 -0500] ProcessIPPRequest(0xbf228008[8]): operation_id = 000a
d [15/Dec/2003:21:11:18 -0500] get_jobs(0xbf228008[8], ipp://localhost/jobs/)
d [15/Dec/2003:21:11:18 -0500] get_jobs: job->id = 5
d [15/Dec/2003:21:11:18 -0500] get_jobs: job->id = 6
D [15/Dec/2003:21:11:18 -0500] ProcessIPPRequest: 8 status_code=1
d [15/Dec/2003:21:11:18 -0500] ProcessIPPRequest: Adding fd 8 to OutputSet...
d [15/Dec/2003:21:11:18 -0500] WriteClient: Removing fd 8 from OutputSet...
d [15/Dec/2003:21:12:07 -0500] DeleteCert: removing certificate for pid 0
d [15/Dec/2003:21:12:07 -0500] AddCert: adding certificate for pid 0
 
Old 12-17-2003, 03:36 PM   #2
pk108
Member
 
Registered: Nov 2003
Location: Shelton, WA
Distribution: Fedora 10
Posts: 31

Original Poster
Rep: Reputation: 15
Problem was the driver. Read somewhere to use HP deskjet 500 driver and that worked.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Help printer from a samba shared printer from linux (using cups) epod69 Linux - Networking 3 12-04-2005 10:44 PM
parrellel printer in CUPS? No parellel printer option... servnov Linux - General 3 10-31-2004 02:08 PM
How to setup a printer in cups? cheater1034 Linux - Hardware 3 08-26-2004 05:21 PM
CUPS Commandline for Staroffice 6 printer setup silverstormboy Debian 1 07-18-2004 07:17 AM
Cups Pdf Printer Setup -- Samba treedstang Linux - General 0 07-03-2004 05:46 PM


All times are GMT -5. The time now is 07:43 AM.

Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration