LinuxQuestions.org
Review your favorite Linux distribution.
Home Forums Tutorials Articles Register
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian
Reload this Page random crashes
User Name
Password
Debian This forum is for the discussion of Debian Linux.

Notices


Reply
Page 2 of 3 1 2 3
  Search this Thread
Old 06-29-2005, 05:41 AM   #16
tmantist
Member
 
Registered: Jun 2005
Location: Florida, USA
Distribution: ~~~Slackware~~~
Posts: 86

Rep: Reputation: 15

glx module is the Xwindows port/version of OpenGL and agpgart is a kernel driver that allows AGP
in Linux that works with graphics card drivers

you might want to checkout

utah-glx.sourceforge.net
 
Old 06-29-2005, 11:11 AM   #17
byte.chaser
Member
 
Registered: Jun 2004
Distribution: debian 3.1 etch
Posts: 76

Original Poster
Rep: Reputation: 15
What error logs should i be posting ? you mean the out put of dmesg? i'm as green at debian and linux in general as our newly seeded lawn


anyway i changed the driver from "fglrx" to "vesa" so far so good
I also changed the resolution part in it as i rechecked moniter specs and says maximum suppoerted resolution is 1024X768.. i was running at 1280X9xx someting
i dunno if this would cause anything but maybe... so far so good anyway.

again i have no idea what logs may be of use.
Last edited by byte.chaser; 06-29-2005 at 11:16 AM.
 
Old 06-29-2005, 02:38 PM   #18
tmantist
Member
 
Registered: Jun 2005
Location: Florida, USA
Distribution: ~~~Slackware~~~
Posts: 86

Rep: Reputation: 15
read the XFree86 man page like this 'man XFree86' or 'man Xorg'
to understand your xserver

-_-_-_-_------then post these log files so that I can look at them-----_-_-_-_-

useful log files are in '/var/log'. Some programs choose to put their log
files whereever they want to and some allow you to configure where you
want them to put the log file

the ones that I'm interested in are:
'/var/log/messages'
'/var/log/syslog'
'/var/log/XFree86.0.log' #this is expected to give good debug info

copy and paste those files to here on this thread

and post the output from 'scanpci -vv' or 'lspci -vv'. I would prefer 'lspci -vv'
 
Old 06-29-2005, 02:41 PM   #19
tmantist
Member
 
Registered: Jun 2005
Location: Florida, USA
Distribution: ~~~Slackware~~~
Posts: 86

Rep: Reputation: 15
I hope that your reading those man pages, 'man XFree86' or 'man Xorg'

if your not reading those man pages, then your on your own.
 
Old 06-29-2005, 04:38 PM   #20
byte.chaser
Member
 
Registered: Jun 2004
Distribution: debian 3.1 etch
Posts: 76

Original Poster
Rep: Reputation: 15
yes i am reading up on XF86Config-4 files as well as XFree86 info , i am not at home right now,
i will post those logs you asked for once home. cant ssh into my box right now.

man XFree86
Last edited by byte.chaser; 06-29-2005 at 05:09 PM.
 
Old 06-29-2005, 05:05 PM   #21
Xian
Member
 
Registered: Feb 2004
Location: 33.31N -111.97W
Distribution: SuSE
Posts: 919

Rep: Reputation: 32
I'm curious as to whether or not these crashes happen across desktop environments. Are you running Gnome, KDE, Xfce, or something else? Do the freezes occur in all of them or just one?
 
Old 06-29-2005, 05:12 PM   #22
byte.chaser
Member
 
Registered: Jun 2004
Distribution: debian 3.1 etch
Posts: 76

Original Poster
Rep: Reputation: 15
currently using

debian 3.1. testing, 2.6.8-2-i686
icewm / and fluxbox (seeing which i like better... damn tough decision )
not a big fan of gnome or kde, i like to customize myself... even though a little blindy sometime
ati drivers with 3d acceleration working

when it does freeze it seems to be whatever wm is running either flux or ice
Last edited by byte.chaser; 06-29-2005 at 05:22 PM.
 
Old 06-29-2005, 05:15 PM   #23
Xian
Member
 
Registered: Feb 2004
Location: 33.31N -111.97W
Distribution: SuSE
Posts: 919

Rep: Reputation: 32
Quote:
Originally posted by byte.chaser
cwhen it does freeze it ssems to be whateve wm is running either flux or ice
Okay, that's fine. You're on the right track.
Just checking to make sure the problem wasn't with a specific wm.
 
Old 06-29-2005, 11:16 PM   #24
byte.chaser
Member
 
Registered: Jun 2004
Distribution: debian 3.1 etch
Posts: 76

Original Poster
Rep: Reputation: 15
Quote:
the ones that I'm interested in are:
'/var/log/messages'
'/var/log/syslog'
'/var/log/XFree86.0.log' #this is expected to give good debug info

copy and paste those files to here on this thread

and post the output from 'scanpci -vv' or 'lspci -vv'. I would prefer 'lspci -vv'

i would like to but each log is approx 45000+ characters, it wont let me post the whole thing so i will paste last half ... i dont see a way to attach them
Last edited by byte.chaser; 06-29-2005 at 11:26 PM.
 
Old 06-29-2005, 11:19 PM   #25
byte.chaser
Member
 
Registered: Jun 2004
Distribution: debian 3.1 etch
Posts: 76

Original Poster
Rep: Reputation: 15
lspci -vv output

Code:
0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
	Subsystem: Asustek Computer, Inc. P4P800 Mainboard
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
	Latency: 0
	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=128M]
	Capabilities: [e4] #09 [2106]
	Capabilities: [a0] AGP version 3.0
		Status: RQ=32 Iso- ArqSz=2 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x8

0000:00:01.0 PCI bridge: Intel Corp. 82865G/PE/P PCI to AGP Controller (rev 02) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64
	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
	I/O behind bridge: 0000c000-0000cfff
	Memory behind bridge: fe900000-fe9fffff
	Prefetchable memory behind bridge: cff00000-efefffff
	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-

0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Asustek Computer, Inc. P4P800 Mainboard
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 169
	Region 4: I/O ports at ef00 [size=32]

0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Asustek Computer, Inc. P4P800 Mainboard
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 177
	Region 4: I/O ports at ef20 [size=32]

0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Asustek Computer, Inc. P4P800 Mainboard
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin C routed to IRQ 185
	Region 4: I/O ports at ef40 [size=32]

0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) (prog-if 00 [UHCI])
	Subsystem: Asustek Computer, Inc. P4P800 Mainboard
	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 169
	Region 4: I/O ports at ef80 [size=32]

0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) (prog-if 20 [EHCI])
	Subsystem: Asustek Computer, Inc. P4P800 Mainboard
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin D routed to IRQ 193
	Region 0: Memory at febffc00 (32-bit, non-prefetchable) [size=1K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
	Capabilities: [58] #0a [20a0]

0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2) (prog-if 00 [Normal decode])
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
	I/O behind bridge: 0000d000-0000dfff
	Memory behind bridge: fea00000-feafffff
	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-

0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0

0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) (prog-if 8a [Master SecP PriP])
	Subsystem: Asustek Computer, Inc. P4P800 Mainboard
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin A routed to IRQ 185
	Region 0: I/O ports at <unassigned>
	Region 1: I/O ports at <unassigned>
	Region 2: I/O ports at <unassigned>
	Region 3: I/O ports at <unassigned>
	Region 4: I/O ports at fc00 [size=16]
	Region 5: Memory at 40000000 (32-bit, non-prefetchable) [size=1K]

0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
	Subsystem: Asustek Computer, Inc. P4P800 Mainboard
	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Interrupt: pin B routed to IRQ 201
	Region 4: I/O ports at 0400 [size=32]

0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
	Subsystem: Asustek Computer, Inc.: Unknown device 812a
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 0
	Interrupt: pin B routed to IRQ 201
	Region 0: I/O ports at e800 [size=256]
	Region 1: I/O ports at ee80 [size=64]
	Region 2: Memory at febff800 (32-bit, non-prefetchable) [size=512]
	Region 3: Memory at febff400 (32-bit, non-prefetchable) [size=256]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro] (prog-if 00 [VGA])
	Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 255 (2000ns min), Cache Line Size: 0x04 (16 bytes)
	Interrupt: pin A routed to IRQ 169
	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
	Region 1: I/O ports at c000 [size=256]
	Region 2: Memory at fe9f0000 (32-bit, non-prefetchable) [size=64K]
	Expansion ROM at fe9c0000 [disabled] [size=128K]
	Capabilities: [58] AGP version 3.0
		Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3+ Rate=x4,x8
		Command: RQ=32 ArqSz=2 Cal=0 SBA+ AGP+ GART64- 64bit- FW+ Rate=x8
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:01:00.1 Display controller: ATI Technologies Inc Radeon R300 [Radeon 9500 Pro] (Secondary)
	Subsystem: ATI Technologies Inc Radeon R300 NE [Radeon 9500 Pro]
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (2000ns min), Cache Line Size: 0x04 (16 bytes)
	Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
	Region 1: Memory at fe9e0000 (32-bit, non-prefetchable) [size=64K]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:03.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
	Subsystem: Asustek Computer, Inc.: Unknown device 808a
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (8000ns max), Cache Line Size: 0x04 (16 bytes)
	Interrupt: pin A routed to IRQ 209
	Region 0: Memory at feaff800 (32-bit, non-prefetchable) [size=2K]
	Region 1: I/O ports at dc00 [size=128]
	Capabilities: [50] Power Management version 2
		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

0000:02:05.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
	Subsystem: Asustek Computer, Inc.: Unknown device 811a
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
	Latency: 64 (5750ns min, 7750ns max), Cache Line Size: 0x04 (16 bytes)
	Interrupt: pin A routed to IRQ 217
	Region 0: Memory at feaf8000 (32-bit, non-prefetchable) [size=16K]
	Region 1: I/O ports at d800 [size=256]
	Expansion ROM at feaa0000 [disabled] [size=128K]
	Capabilities: [48] Power Management version 2
		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
	Capabilities: [50] Vital Product Data
 
Old 06-29-2005, 11:21 PM   #26
byte.chaser
Member
 
Registered: Jun 2004
Distribution: debian 3.1 etch
Posts: 76

Original Poster
Rep: Reputation: 15
'/var/log/XFree86.0.log' last half

Code:
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1200" (hsync out of range)
(II) fglrx(0): Not using default mode "800x600" (hsync out of range)
(II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
(II) fglrx(0): Not using default mode "896x672" (hsync out of range)
(II) fglrx(0): Not using default mode "1792x1344" (hsync out of range)
(II) fglrx(0): Not using default mode "896x672" (hsync out of range)
(II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
(II) fglrx(0): Not using default mode "928x696" (hsync out of range)
(II) fglrx(0): Not using default mode "1856x1392" (hsync out of range)
(II) fglrx(0): Not using default mode "928x696" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "1400x1050" (hsync out of range)
(II) fglrx(0): Not using default mode "700x525" (hsync out of range)
(II) fglrx(0): Not using default mode "1400x1050" (hsync out of range)
(II) fglrx(0): Not using default mode "700x525" (hsync out of range)
(II) fglrx(0): Not using default mode "1600x1024" (hsync out of range)
(II) fglrx(0): Not using default mode "800x512" (hsync out of range)
(II) fglrx(0): Not using default mode "1920x1440" (hsync out of range)
(II) fglrx(0): Not using default mode "960x720" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "2048x1536" (hsync out of range)
(II) fglrx(0): Not using default mode "1024x768" (hsync out of range)
(II) fglrx(0): Not using default mode "1152x768" (width too large for virtual size)
(--) fglrx(0): Virtual size is 1024x768 (pitch 1024)
(**) fglrx(0): *Default mode "1024x768": 65.0 MHz (scaled from -1765415.2 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync
(**) fglrx(0): *Default mode "800x600": 56.3 MHz (scaled from 809984.1 MHz), 53.7 kHz, 85.1 Hz
(II) fglrx(0): Modeline "800x600"   56.30  800 832 896 1048  600 601 604 631 +hsync +vsync
(**) fglrx(0): *Default mode "800x600": 49.5 MHz (scaled from -287208.8 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync
(**) fglrx(0):  Default mode "1024x768": 44.9 MHz (scaled from 1370701.2 MHz), 35.5 kHz, 87.1 Hz (I)
(II) fglrx(0): Modeline "1024x768"   44.90  1024 1032 1208 1264  768 768 776 817 interlace +hsync +vsync
(**) fglrx(0):  Default mode "832x624": 57.3 MHz (scaled from 1448780.2 MHz), 49.7 kHz, 74.6 Hz
(II) fglrx(0): Modeline "832x624"   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync
(**) fglrx(0):  Default mode "800x600": 50.0 MHz (scaled from -1027629.6 MHz), 48.1 kHz, 72.2 Hz
(II) fglrx(0): Modeline "800x600"   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync
(**) fglrx(0):  Default mode "800x600": 40.0 MHz (scaled from 895883.3 MHz), 37.9 kHz, 60.3 Hz
(II) fglrx(0): Modeline "800x600"   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync
(**) fglrx(0):  Default mode "800x600": 36.0 MHz (scaled from -1770685.4 MHz), 35.2 kHz, 56.2 Hz
(II) fglrx(0): Modeline "800x600"   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync
(**) fglrx(0):  Default mode "640x480": 36.0 MHz (scaled from -1770685.4 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"   36.00  640 696 752 832  480 481 484 509 -hsync -vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 598133.9 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 656 720 840  480 481 484 500 -hsync -vsync
(**) fglrx(0):  Default mode "640x480": 31.5 MHz (scaled from 598133.9 MHz), 37.9 kHz, 72.8 Hz
(II) fglrx(0): Modeline "640x480"   31.50  640 664 704 832  480 489 491 520 -hsync -vsync
(**) fglrx(0):  Default mode "640x480": 25.2 MHz (scaled from -1239479.8 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"   25.20  640 656 752 800  480 490 492 525 -hsync -vsync
(**) fglrx(0):  Default mode "720x400": 35.5 MHz (scaled from -1030264.7 MHz), 37.9 kHz, 85.0 Hz
(II) fglrx(0): Modeline "720x400"   35.50  720 756 828 936  400 401 404 446 -hsync +vsync
(**) fglrx(0):  Default mode "640x400": 31.5 MHz (scaled from 598133.9 MHz), 37.9 kHz, 85.1 Hz
(II) fglrx(0): Modeline "640x400"   31.50  640 672 736 832  400 401 404 445 -hsync +vsync
(**) fglrx(0):  Default mode "640x350": 31.5 MHz (scaled from 598133.9 MHz), 37.9 kHz, 85.1 Hz
(II) fglrx(0): Modeline "640x350"   31.50  640 672 736 832  350 382 385 445 +hsync -vsync
(**) fglrx(0):  Default mode "576x384": 32.5 MHz (scaled from -1290581.9 MHz), 44.2 kHz, 54.8 Hz (D)
(II) fglrx(0): Modeline "576x384"   32.50  576 589 657 736  384 385 388 403 doublescan +hsync +vsync
(**) fglrx(0):  Default mode "512x384": 32.5 MHz (scaled from -882707.6 MHz), 48.4 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "512x384"   32.50  512 524 592 672  384 385 388 403 doublescan -hsync -vsync
(**) fglrx(0):  Default mode "512x384": 22.4 MHz (scaled from -1462133.1 MHz), 35.5 kHz, 87.1 Hz (D)
(II) fglrx(0): Modeline "512x384"   22.45  512 516 604 632  384 384 388 409 interlace doublescan +hsync +vsync
(**) fglrx(0):  Default mode "416x312": 28.6 MHz (scaled from -1423093.6 MHz), 49.7 kHz, 74.7 Hz (D)
(II) fglrx(0): Modeline "416x312"   28.64  416 432 464 576  312 312 314 333 doublescan -hsync -vsync
(**) fglrx(0):  Default mode "400x300": 28.1 MHz (scaled from 404992.1 MHz), 53.7 kHz, 85.3 Hz (D)
(II) fglrx(0): Modeline "400x300"   28.15  400 416 448 524  300 300 302 315 doublescan +hsync +vsync
(**) fglrx(0):  Default mode "400x300": 24.8 MHz (scaled from 2003879.2 MHz), 46.9 kHz, 75.1 Hz (D)
(II) fglrx(0): Modeline "400x300"   24.75  400 408 448 528  300 300 302 312 doublescan +hsync +vsync
(**) fglrx(0):  Default mode "400x300": 25.0 MHz (scaled from 1633668.9 MHz), 48.1 kHz, 72.2 Hz (D)
(II) fglrx(0): Modeline "400x300"   25.00  400 428 488 520  300 318 321 333 doublescan +hsync +vsync
(**) fglrx(0):  Default mode "400x300": 20.0 MHz (scaled from 447941.6 MHz), 37.9 kHz, 60.3 Hz (D)
(II) fglrx(0): Modeline "400x300"   20.00  400 420 484 528  300 300 302 314 doublescan +hsync +vsync
(++) fglrx(0): DPI set to (100, 100)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/X11R6/lib/modules/libfb.a
(II) Module fb: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.0.0
	ABI class: XFree86 ANSI C Emulation, version 0.2
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Loading /usr/X11R6/lib/modules/libramdac.a
(II) Module ramdac: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 0.1.0
	ABI class: XFree86 Video Driver, version 0.6
(**) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/X11R6/lib/modules/libxaa.a
(II) Module xaa: vendor="The XFree86 Project"
	compiled for 4.3.0.1, module version = 1.1.0
	ABI class: XFree86 Video Driver, version 0.6
(==) fglrx(0): HPV inactive
(==) fglrx(0): FSAA enabled: NO
(**) fglrx(0): FSAA Gamma enabled
(**) fglrx(0): FSAA Multisample Position is fix
(**) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/X11R6/lib/modules/linux/libfglrxdrm.a
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
	compiled for 4.3.0.1, module version = 8.14.13
	ABI class: XFree86 Server Extension, version 0.2
(II) fglrx(0): Depth moves disabled by default
(**) fglrx(0): Capabilities: 0x00000000
(**) fglrx(0): cpuFlags: 0x8000001d
(**) fglrx(0): cpuSpeedMHz: 0x0000095f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): using built in AGPGART module: no
(**) fglrx(0): UseFastTLS=0
(**) fglrx(0): BlockSignalsOnLock=1
(==) fglrx(0): EnablePrivateBackZ = NO
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
	[0] 0	0	0xfe9f0000 - 0xfe9fffff (0x10000) MX[B]
	[1] 0	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[B]
	[2] -1	0	0xffe00000 - 0xffffffff (0x200000) MX[B](B)
	[3] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
	[4] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
	[5] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
	[6] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
	[7] -1	0	0xfeaf8000 - 0xfeafbfff (0x4000) MX[B]
	[8] -1	0	0xfeaff800 - 0xfeafffff (0x800) MX[B]
	[9] -1	0	0xfebff400 - 0xfebff4ff (0x100) MX[B]
	[10] -1	0	0xfebff800 - 0xfebff9ff (0x200) MX[B]
	[11] -1	0	0x40000000 - 0x400003ff (0x400) MX[B]
	[12] -1	0	0xfebffc00 - 0xfebfffff (0x400) MX[B]
	[13] -1	0	0xf0000000 - 0xefffffff (0x0) MX[B]O
	[14] -1	0	0xfe9e0000 - 0xfe9effff (0x10000) MX[B](B)
	[15] -1	0	0xd8000000 - 0xdfffffff (0x8000000) MX[B](B)
	[16] -1	0	0xfe9c0000 - 0xfe9dffff (0x20000) MX[B](B)
	[17] -1	0	0xfe9f0000 - 0xfe9fffff (0x10000) MX[B](B)
	[18] -1	0	0xe0000000 - 0xe7ffffff (0x8000000) MX[B](B)
	[19] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
	[20] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
	[21] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
	[22] 0	0	0x0000c000 - 0x0000c0ff (0x100) IX[B]
	[23] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
	[24] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
	[25] -1	0	0x0000d800 - 0x0000d8ff (0x100) IX[B]
	[26] -1	0	0x0000dc00 - 0x0000dc7f (0x80) IX[B]
	[27] -1	0	0x0000ee80 - 0x0000eebf (0x40) IX[B]
	[28] -1	0	0x0000e800 - 0x0000e8ff (0x100) IX[B]
	[29] -1	0	0x00000400 - 0x0000041f (0x20) IX[B]
	[30] -1	0	0x0000fc00 - 0x0000fc0f (0x10) IX[B]
	[31] -1	0	0x0000ef80 - 0x0000ef9f (0x20) IX[B]
	[32] -1	0	0x0000ef40 - 0x0000ef5f (0x20) IX[B]
	[33] -1	0	0x0000ef20 - 0x0000ef3f (0x20) IX[B]
	[34] -1	0	0x0000ef00 - 0x0000ef1f (0x20) IX[B]
	[35] -1	0	0x0000c000 - 0x0000c0ff (0x100) IX[B](B)
	[36] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
	[37] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
(II) fglrx(0): UMM area:     0xe0501000 (size=0x07aff000)
(II) fglrx(0): driver needs XFree86 4.3.x
(II) fglrx(0): detected XFree86 4.3.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 4, (OK)
drmGetBusid returned ''
(II) fglrx(0): [drm] created "fglrx" driver at busid "PCI:1:0:0"
(II) fglrx(0): [drm] added 8192 byte SAREA at 0xf8b09000
(II) fglrx(0): [drm] mapped SAREA 0xf8b09000 to 0x4024a000
(II) fglrx(0): [drm] framebuffer handle = 0xe0000000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0):     Name: fglrx
(II) fglrx(0):     Version: 8.14.13
(II) fglrx(0):     Date: Jun  8 2005
(II) fglrx(0):     Desc: ATI FireGL DRM kernel module
(II) fglrx(0): Kernel Module version matches driver.
(II) fglrx(0): Kernel Module Build Time Information:
(II) fglrx(0):     Build-Kernel UTS_RELEASE:        2.6.8-2-686
(II) fglrx(0):     Build-Kernel MODVERSIONS:        no
(II) fglrx(0):     Build-Kernel __SMP__:            no
(II) fglrx(0):     Build-Kernel PAGE_SIZE:          0x1000
(II) fglrx(0): [drm] register handle = 0xfe9f0000
(II) fglrx(0): [agp] Mode=0x1f004a1b bridge: 0x8086/0x2570
(II) fglrx(0): [agp] AGP v1/2 disable mask 0x00000000
(II) fglrx(0): [agp] AGP v3 disable mask   0x00000000
(II) fglrx(0): [agp] enabling AGP with mode=0x1f004b1a
(II) fglrx(0): [agp] AGP protocol is enabled for graphics board. (cmd=0x1f004312)
(II) fglrx(0): [agp] graphics chipset has AGP v3.0 (native mode)
(II) fglrx(0): [drm] ringbuffer size = 0x00100000 bytes
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 28672
(II) fglrx(0): [drm] texture shared area handle = 0xf8d3d000
(II) fglrx(0): shared FSAAScale=1
(II) fglrx(0): DRI initialization successfull!
(II) fglrx(0): FBADPhys: 0xe0000000 FBMappedSize: 0x00501000
(II) fglrx(0): FBMM initialized for area (0,0)-(1024,1281)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1024,768) (front color buffer - assumption)
(==) fglrx(0): Backing store disabled
(==) fglrx(0): Silken mouse enabled
(II) fglrx(0): Using hardware cursor (scanline 768)
(II) fglrx(0): Largest offscreen area available: 1024 x 505
(**) Option "dpms"
(**) fglrx(0): DPMS enabled
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
	Screen to screen bit blits
	Solid filled rectangles
	8x8 mono pattern filled rectangles
	Solid Lines
	Dashed Lines
	Offscreen Pixmaps
	Setting up tile and stipple cache:
		24 128x128 slots
(II) fglrx(0): Acceleration enabled
(II) fglrx(0): X context handle = 0x00000001
(II) fglrx(0): [DRI] installation complete
(II) fglrx(0): Direct rendering enabled
(**) fglrx(0): Video overlay enabled on CRTC1
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(==) RandR enabled
(II) Setting vga for screen 0.
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension LBX
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(**) Option "Protocol" "ImPS/2"
(**) Mouse1: Protocol: "ImPS/2"
(**) Option "CorePointer"
(**) Mouse1: Core Pointer
(**) Option "Device" "/dev/psaux"
(**) Mouse1: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5"
(**) Mouse1: ZAxisMapping: buttons 4 and 5
(**) Mouse1: Buttons: 5
(II) Keyboard "Keyboard1" handled by legacy driver
(II) XINPUT: Adding extended input device "Mouse1" (type: MOUSE)
(II) Mouse1: ps2EnableDataReporting: succeeded
Could not init font path element /usr/X11R6/lib/X11/fonts/Speedo/, removing from list!
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
(II) Mouse1: ps2EnableDataReporting: succeeded
(II) 3rd Button detected: disabling emulate3Button
 
Old 06-29-2005, 11:25 PM   #27
byte.chaser
Member
 
Registered: Jun 2004
Distribution: debian 3.1 etch
Posts: 76

Original Poster
Rep: Reputation: 15
/var/log/syslog for today... its 150000'is characters :/

Code:
Jun 29 21:32:31 debian kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
Jun 29 21:32:31 debian kernel: Inspecting /boot/System.map-2.6.8-2-686
Jun 29 21:32:32 debian kernel: Loaded 27390 symbols from /boot/System.map-2.6.8-2-686.
Jun 29 21:32:32 debian kernel: Symbols match kernel version 2.6.8.
Jun 29 21:32:32 debian kernel: No module symbols loaded - kernel modules not enabled. 
Jun 29 21:32:32 debian kernel: )
Jun 29 21:32:32 debian kernel:  BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
Jun 29 21:32:32 debian kernel:  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Jun 29 21:32:32 debian kernel:  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Jun 29 21:32:32 debian kernel: 127MB HIGHMEM available.
Jun 29 21:32:32 debian kernel: 896MB LOWMEM available.
Jun 29 21:32:32 debian kernel: found SMP MP-table at 000ff780
Jun 29 21:32:32 debian kernel: On node 0 totalpages: 262064
Jun 29 21:32:32 debian kernel:   DMA zone: 4096 pages, LIFO batch:1
Jun 29 21:32:32 debian kernel:   Normal zone: 225280 pages, LIFO batch:16
Jun 29 21:32:32 debian kernel:   HighMem zone: 32688 pages, LIFO batch:7
Jun 29 21:32:32 debian kernel: DMI 2.3 present.
Jun 29 21:32:32 debian kernel: ACPI: RSDP (v000 ACPIAM                                    ) @ 0x000fad80
Jun 29 21:32:32 debian kernel: ACPI: RSDT (v001 A M I  OEMRSDT  0x09000424 MSFT 0x00000097) @ 0x3ffb0000
Jun 29 21:32:32 debian kernel: ACPI: FADT (v002 A M I  OEMFACP  0x09000424 MSFT 0x00000097) @ 0x3ffb0200
Jun 29 21:32:32 debian kernel: ACPI: MADT (v001 A M I  OEMAPIC  0x09000424 MSFT 0x00000097) @ 0x3ffb0390
Jun 29 21:32:32 debian kernel: ACPI: OEMB (v001 A M I  OEMBIOS  0x09000424 MSFT 0x00000097) @ 0x3ffc0040
Jun 29 21:32:32 debian kernel: ACPI: DSDT (v001  A0030 A0030009 0x00000009 INTL 0x02002026) @ 0x00000000
Jun 29 21:32:32 debian kernel: ACPI: PM-Timer IO Port: 0x808
Jun 29 21:32:32 debian kernel: ACPI: Local APIC address 0xfee00000
Jun 29 21:32:32 debian kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jun 29 21:32:32 debian kernel: Processor #0 15:2 APIC version 20
Jun 29 21:32:32 debian kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
Jun 29 21:32:32 debian kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jun 29 21:32:32 debian kernel: IOAPIC[0]: Assigned apic_id 1
Jun 29 21:32:32 debian kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jun 29 21:32:32 debian kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 29 21:32:32 debian kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 29 21:32:32 debian kernel: ACPI: IRQ0 used by override.
Jun 29 21:32:32 debian kernel: ACPI: IRQ2 used by override.
Jun 29 21:32:32 debian kernel: ACPI: IRQ9 used by override.
Jun 29 21:32:32 debian kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Jun 29 21:32:32 debian kernel: Using ACPI (MADT) for SMP configuration information
Jun 29 21:32:32 debian kernel: Built 1 zonelists
Jun 29 21:32:32 debian kernel: Kernel command line: root=/dev/hda1 ro 
Jun 29 21:32:32 debian kernel: Initializing CPU#0
Jun 29 21:32:32 debian kernel: PID hash table entries: 4096 (order 12: 32768 bytes)
Jun 29 21:32:32 debian kernel: Detected 2399.936 MHz processor.
Jun 29 21:32:32 debian kernel: Using pmtmr for high-res timesource
Jun 29 21:32:32 debian kernel: Console: colour VGA+ 80x25
Jun 29 21:32:32 debian kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jun 29 21:32:32 debian kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 29 21:32:32 debian kernel: Memory: 1031052k/1048256k available (1551k kernel code, 16308k reserved, 690k data, 148k init, 130752k highmem)
Jun 29 21:32:32 debian kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 29 21:32:32 debian kernel: Calibrating delay loop... 4751.36 BogoMIPS
Jun 29 21:32:32 debian kernel: Security Scaffold v1.0.0 initialized
Jun 29 21:32:32 debian kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jun 29 21:32:32 debian kernel: CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
Jun 29 21:32:32 debian kernel: CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
Jun 29 21:32:32 debian kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Jun 29 21:32:32 debian kernel: CPU: L2 cache: 512K
Jun 29 21:32:32 debian kernel: CPU: After all inits, caps:        bfebfbff 00000000 00000000 00000080
Jun 29 21:32:32 debian kernel: Intel machine check architecture supported.
Jun 29 21:32:32 debian kernel: Intel machine check reporting enabled on CPU#0.
Jun 29 21:32:32 debian kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Jun 29 21:32:32 debian kernel: CPU0: Thermal monitoring enabled
Jun 29 21:32:32 debian kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Jun 29 21:32:32 debian kernel: Enabling fast FPU save and restore... done.
Jun 29 21:32:32 debian kernel: Enabling unmasked SIMD FPU exception support... done.
Jun 29 21:32:32 debian kernel: Checking 'hlt' instruction... OK.
Jun 29 21:32:32 debian kernel: enabled ExtINT on CPU#0
Jun 29 21:32:32 debian kernel: ESR value before enabling vector: 00000000
Jun 29 21:32:32 debian kernel: ESR value after enabling vector: 00000000
Jun 29 21:32:32 debian kernel: ENABLING IO-APIC IRQs
Jun 29 21:32:32 debian kernel: init IO_APIC IRQs
Jun 29 21:32:32 debian kernel:  IO-APIC (apicid-pin) 1-0, 1-16, 1-17, 1-18, 1-19, 1-20, 1-21, 1-22, 1-23 not connected.
Jun 29 21:32:32 debian kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Jun 29 21:32:32 debian kernel: Using local APIC timer interrupts.
Jun 29 21:32:32 debian kernel: calibrating APIC timer ...
Jun 29 21:32:32 debian kernel: ..... CPU clock speed is 2398.0488 MHz.
Jun 29 21:32:32 debian kernel: ..... host bus clock speed is 133.0249 MHz.
Jun 29 21:32:32 debian kernel: checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Jun 29 21:32:32 debian kernel: Freeing initrd memory: 4556k freed
Jun 29 21:32:32 debian kernel: NET: Registered protocol family 16
Jun 29 21:32:32 debian kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
Jun 29 21:32:32 debian kernel: PCI: Using configuration type 1
Jun 29 21:32:32 debian kernel: mtrr: v2.0 (20020519)
Jun 29 21:32:32 debian kernel: ACPI: Subsystem revision 20040326
Jun 29 21:32:32 debian kernel: ACPI: Interpreter enabled
Jun 29 21:32:32 debian kernel: ACPI: Using IOAPIC for interrupt routing
Jun 29 21:32:32 debian kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Jun 29 21:32:32 debian kernel: PCI: Probing PCI hardware (bus 00)
Jun 29 21:32:32 debian kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Jun 29 21:32:32 debian kernel: PCI: Transparent bridge - 0000:00:1e.0
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jun 29 21:32:32 debian kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 29 21:32:32 debian kernel: ASUS P4P800 detected. Disabling PnPBIOS
Jun 29 21:32:32 debian kernel: PnPBIOS: Disabled
Jun 29 21:32:32 debian kernel: PCI: Using ACPI for IRQ routing
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 209
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 217
Jun 29 21:32:32 debian kernel: number of MP IRQ sources: 15.
Jun 29 21:32:32 debian kernel: number of IO-APIC #1 registers: 24.
Jun 29 21:32:32 debian kernel: testing the IO APIC.......................
Jun 29 21:32:32 debian kernel: IO APIC #1......
Jun 29 21:32:32 debian kernel: .... register #00: 01000000
Jun 29 21:32:32 debian kernel: .......    : physical APIC id: 01
Jun 29 21:32:32 debian kernel: .......    : Delivery Type: 0
Jun 29 21:32:32 debian kernel: .......    : LTS          : 0
Jun 29 21:32:32 debian kernel: .... register #01: 00178020
Jun 29 21:32:32 debian kernel: .......     : max redirection entries: 0017
Jun 29 21:32:32 debian kernel: .......     : PRQ implemented: 1
Jun 29 21:32:32 debian kernel: .......     : IO APIC version: 0020
Jun 29 21:32:32 debian kernel: .... IRQ redirection table:
Jun 29 21:32:32 debian kernel:  NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:   
Jun 29 21:32:32 debian kernel:  00 000 00  1    0    0   0   0    0    0    00
Jun 29 21:32:32 debian kernel:  01 001 01  0    0    0   0   0    1    1    39
Jun 29 21:32:32 debian kernel:  02 001 01  0    0    0   0   0    1    1    31
Jun 29 21:32:32 debian kernel:  03 001 01  0    0    0   0   0    1    1    41
Jun 29 21:32:32 debian kernel:  04 001 01  0    0    0   0   0    1    1    49
Jun 29 21:32:32 debian kernel:  05 001 01  0    0    0   0   0    1    1    51
Jun 29 21:32:32 debian kernel:  06 001 01  0    0    0   0   0    1    1    59
Jun 29 21:32:32 debian kernel:  07 001 01  0    0    0   0   0    1    1    61
Jun 29 21:32:32 debian kernel:  08 001 01  0    0    0   0   0    1    1    69
Jun 29 21:32:32 debian kernel:  09 001 01  0    1    0   0   0    1    1    71
Jun 29 21:32:32 debian kernel:  0a 001 01  0    0    0   0   0    1    1    79
Jun 29 21:32:32 debian kernel:  0b 001 01  0    0    0   0   0    1    1    81
Jun 29 21:32:32 debian kernel:  0c 001 01  0    0    0   0   0    1    1    89
Jun 29 21:32:32 debian kernel:  0d 001 01  0    0    0   0   0    1    1    91
Jun 29 21:32:32 debian kernel:  0e 001 01  0    0    0   0   0    1    1    99
Jun 29 21:32:32 debian kernel:  0f 001 01  0    0    0   0   0    1    1    A1
Jun 29 21:32:32 debian kernel:  10 001 01  1    1    0   1   0    1    1    A9
Jun 29 21:32:32 debian kernel:  11 001 01  1    1    0   1   0    1    1    C9
Jun 29 21:32:32 debian kernel:  12 001 01  1    1    0   1   0    1    1    B9
Jun 29 21:32:32 debian kernel:  13 001 01  1    1    0   1   0    1    1    B1
Jun 29 21:32:32 debian kernel:  14 001 01  1    1    0   1   0    1    1    D1
Jun 29 21:32:32 debian kernel:  15 00A 0A  1    0    0   0   0    0    2    40
Jun 29 21:32:32 debian kernel:  16 001 01  1    1    0   1   0    1    1    D9
Jun 29 21:32:32 debian kernel:  17 001 01  1    1    0   1   0    1    1    C1
Jun 29 21:32:32 debian kernel: Using vector-based indexing
Jun 29 21:32:32 debian kernel: IRQ to pin mappings:
Jun 29 21:32:32 debian kernel: IRQ0 -> 0:2
Jun 29 21:32:32 debian kernel: IRQ1 -> 0:1
Jun 29 21:32:32 debian kernel: IRQ3 -> 0:3
Jun 29 21:32:32 debian kernel: IRQ4 -> 0:4
Jun 29 21:32:32 debian kernel: IRQ5 -> 0:5
Jun 29 21:32:32 debian kernel: IRQ6 -> 0:6
Jun 29 21:32:32 debian kernel: IRQ7 -> 0:7
Jun 29 21:32:32 debian kernel: IRQ8 -> 0:8
Jun 29 21:32:32 debian kernel: IRQ9 -> 0:9
Jun 29 21:32:32 debian kernel: IRQ10 -> 0:10
Jun 29 21:32:32 debian kernel: IRQ11 -> 0:11
Jun 29 21:32:32 debian kernel: IRQ12 -> 0:12
Jun 29 21:32:32 debian kernel: IRQ13 -> 0:13
Jun 29 21:32:32 debian kernel: IRQ14 -> 0:14
Jun 29 21:32:32 debian kernel: IRQ15 -> 0:15
Jun 29 21:32:32 debian kernel: IRQ169 -> 0:16
Jun 29 21:32:32 debian kernel: IRQ201 -> 0:17
Jun 29 21:32:32 debian kernel: IRQ185 -> 0:18
Jun 29 21:32:32 debian kernel: IRQ177 -> 0:19
Jun 29 21:32:32 debian kernel: IRQ209 -> 0:20
Jun 29 21:32:32 debian kernel: IRQ217 -> 0:22
Jun 29 21:32:32 debian kernel: IRQ193 -> 0:23
Jun 29 21:32:32 debian kernel: .................................... done.
Jun 29 21:32:32 debian kernel: highmem bounce pool size: 64 pages
Jun 29 21:32:32 debian kernel: VFS: Disk quotas dquot_6.5.1
Jun 29 21:32:32 debian kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 29 21:32:32 debian kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Jun 29 21:32:32 debian kernel: devfs: boot_options: 0x0
Jun 29 21:32:32 debian kernel: Initializing Cryptographic API
Jun 29 21:32:32 debian kernel: isapnp: Scanning for PnP cards...
Jun 29 21:32:32 debian kernel: isapnp: No Plug & Play device found
 
Old 06-29-2005, 11:28 PM   #28
byte.chaser
Member
 
Registered: Jun 2004
Distribution: debian 3.1 etch
Posts: 76

Original Poster
Rep: Reputation: 15
/var/log/messages

Code:
Jun 29 21:32:31 debian syslogd 1.4.1#17: restart.
Jun 29 21:32:31 debian kernel: klogd 1.4.1#17, log source = /proc/kmsg started.
Jun 29 21:32:31 debian kernel: Inspecting /boot/System.map-2.6.8-2-686
Jun 29 21:32:32 debian kernel: Loaded 27390 symbols from /boot/System.map-2.6.8-2-686.
Jun 29 21:32:32 debian kernel: Symbols match kernel version 2.6.8.
Jun 29 21:32:32 debian kernel: No module symbols loaded - kernel modules not enabled. 
Jun 29 21:32:32 debian kernel: )
Jun 29 21:32:32 debian kernel:  BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
Jun 29 21:32:32 debian kernel:  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
Jun 29 21:32:32 debian kernel:  BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
Jun 29 21:32:32 debian kernel: 127MB HIGHMEM available.
Jun 29 21:32:32 debian kernel: 896MB LOWMEM available.
Jun 29 21:32:32 debian kernel: found SMP MP-table at 000ff780
Jun 29 21:32:32 debian kernel: DMI 2.3 present.
Jun 29 21:32:32 debian kernel: ACPI: RSDP (v000 ACPIAM                                    ) @ 0x000fad80
Jun 29 21:32:32 debian kernel: ACPI: RSDT (v001 A M I  OEMRSDT  0x09000424 MSFT 0x00000097) @ 0x3ffb0000
Jun 29 21:32:32 debian kernel: ACPI: FADT (v002 A M I  OEMFACP  0x09000424 MSFT 0x00000097) @ 0x3ffb0200
Jun 29 21:32:32 debian kernel: ACPI: MADT (v001 A M I  OEMAPIC  0x09000424 MSFT 0x00000097) @ 0x3ffb0390
Jun 29 21:32:32 debian kernel: ACPI: OEMB (v001 A M I  OEMBIOS  0x09000424 MSFT 0x00000097) @ 0x3ffc0040
Jun 29 21:32:32 debian kernel: ACPI: DSDT (v001  A0030 A0030009 0x00000009 INTL 0x02002026) @ 0x00000000
Jun 29 21:32:32 debian kernel: ACPI: PM-Timer IO Port: 0x808
Jun 29 21:32:32 debian kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Jun 29 21:32:32 debian kernel: Processor #0 15:2 APIC version 20
Jun 29 21:32:32 debian kernel: ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
Jun 29 21:32:32 debian kernel: ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
Jun 29 21:32:32 debian kernel: IOAPIC[0]: Assigned apic_id 1
Jun 29 21:32:32 debian kernel: IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
Jun 29 21:32:32 debian kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
Jun 29 21:32:32 debian kernel: ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
Jun 29 21:32:32 debian kernel: Enabling APIC mode:  Flat.  Using 1 I/O APICs
Jun 29 21:32:32 debian kernel: Using ACPI (MADT) for SMP configuration information
Jun 29 21:32:32 debian kernel: Built 1 zonelists
Jun 29 21:32:32 debian kernel: Kernel command line: root=/dev/hda1 ro 
Jun 29 21:32:32 debian kernel: Initializing CPU#0
Jun 29 21:32:32 debian kernel: PID hash table entries: 4096 (order 12: 32768 bytes)
Jun 29 21:32:32 debian kernel: Detected 2399.936 MHz processor.
Jun 29 21:32:32 debian kernel: Using pmtmr for high-res timesource
Jun 29 21:32:32 debian kernel: Console: colour VGA+ 80x25
Jun 29 21:32:32 debian kernel: Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Jun 29 21:32:32 debian kernel: Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun 29 21:32:32 debian kernel: Memory: 1031052k/1048256k available (1551k kernel code, 16308k reserved, 690k data, 148k init, 130752k highmem)
Jun 29 21:32:32 debian kernel: Checking if this processor honours the WP bit even in supervisor mode... Ok.
Jun 29 21:32:32 debian kernel: Calibrating delay loop... 4751.36 BogoMIPS
Jun 29 21:32:32 debian kernel: Security Scaffold v1.0.0 initialized
Jun 29 21:32:32 debian kernel: Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Jun 29 21:32:32 debian kernel: CPU: Trace cache: 12K uops, L1 D cache: 8K
Jun 29 21:32:32 debian kernel: CPU: L2 cache: 512K
Jun 29 21:32:32 debian kernel: Intel machine check architecture supported.
Jun 29 21:32:32 debian kernel: Intel machine check reporting enabled on CPU#0.
Jun 29 21:32:32 debian kernel: CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
Jun 29 21:32:32 debian kernel: CPU0: Thermal monitoring enabled
Jun 29 21:32:32 debian kernel: CPU: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 07
Jun 29 21:32:32 debian kernel: Enabling fast FPU save and restore... done.
Jun 29 21:32:32 debian kernel: Enabling unmasked SIMD FPU exception support... done.
Jun 29 21:32:32 debian kernel: Checking 'hlt' instruction... OK.
Jun 29 21:32:32 debian kernel: enabled ExtINT on CPU#0
Jun 29 21:32:32 debian kernel: ESR value before enabling vector: 00000000
Jun 29 21:32:32 debian kernel: ESR value after enabling vector: 00000000
Jun 29 21:32:32 debian kernel: ENABLING IO-APIC IRQs
Jun 29 21:32:32 debian kernel: ..TIMER: vector=0x31 pin1=2 pin2=-1
Jun 29 21:32:32 debian kernel: Using local APIC timer interrupts.
Jun 29 21:32:32 debian kernel: calibrating APIC timer ...
Jun 29 21:32:32 debian kernel: ..... CPU clock speed is 2398.0488 MHz.
Jun 29 21:32:32 debian kernel: ..... host bus clock speed is 133.0249 MHz.
Jun 29 21:32:32 debian kernel: checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Jun 29 21:32:32 debian kernel: Freeing initrd memory: 4556k freed
Jun 29 21:32:32 debian kernel: NET: Registered protocol family 16
Jun 29 21:32:32 debian kernel: PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=2
Jun 29 21:32:32 debian kernel: PCI: Using configuration type 1
Jun 29 21:32:32 debian kernel: mtrr: v2.0 (20020519)
Jun 29 21:32:32 debian kernel: ACPI: Subsystem revision 20040326
Jun 29 21:32:32 debian kernel: ACPI: Interpreter enabled
Jun 29 21:32:32 debian kernel: ACPI: Using IOAPIC for interrupt routing
Jun 29 21:32:32 debian kernel: ACPI: PCI Root Bridge [PCI0] (00:00)
Jun 29 21:32:32 debian kernel: PCI: Probing PCI hardware (bus 00)
Jun 29 21:32:32 debian kernel: PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Jun 29 21:32:32 debian kernel: PCI: Transparent bridge - 0000:00:1e.0
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 11 12 14 15)
Jun 29 21:32:32 debian kernel: ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
Jun 29 21:32:32 debian kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
Jun 29 21:32:32 debian kernel: ASUS P4P800 detected. Disabling PnPBIOS
Jun 29 21:32:32 debian kernel: PnPBIOS: Disabled
Jun 29 21:32:32 debian kernel: PCI: Using ACPI for IRQ routing
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 201
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 209
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 217
Jun 29 21:32:32 debian kernel: testing the IO APIC.......................
Jun 29 21:32:32 debian kernel: Using vector-based indexing
Jun 29 21:32:32 debian kernel: .................................... done.
Jun 29 21:32:32 debian kernel: highmem bounce pool size: 64 pages
Jun 29 21:32:32 debian kernel: VFS: Disk quotas dquot_6.5.1
Jun 29 21:32:32 debian kernel: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun 29 21:32:32 debian kernel: devfs: 2004-01-31 Richard Gooch (rgooch@atnf.csiro.au)
Jun 29 21:32:32 debian kernel: devfs: boot_options: 0x0
Jun 29 21:32:32 debian kernel: Initializing Cryptographic API
Jun 29 21:32:32 debian kernel: isapnp: Scanning for PnP cards...
Jun 29 21:32:32 debian kernel: isapnp: No Plug & Play device found
Jun 29 21:32:32 debian kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
Jun 29 21:32:32 debian kernel: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Jun 29 21:32:32 debian kernel: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Jun 29 21:32:32 debian kernel: RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
Jun 29 21:32:32 debian kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
Jun 29 21:32:32 debian kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
Jun 29 21:32:32 debian kernel: input: AT Translated Set 2 keyboard on isa0060/serio0
Jun 29 21:32:32 debian kernel: NET: Registered protocol family 2
Jun 29 21:32:32 debian kernel: IP: routing cache hash table of 8192 buckets, 64Kbytes
Jun 29 21:32:32 debian kernel: TCP: Hash tables configured (established 262144 bind 65536)
Jun 29 21:32:32 debian kernel: NET: Registered protocol family 8
Jun 29 21:32:32 debian kernel: NET: Registered protocol family 20
Jun 29 21:32:32 debian kernel: ACPI: (supports S0 S1 S3 S4 S5)
Jun 29 21:32:32 debian kernel: RAMDISK: cramfs filesystem found at block 0
Jun 29 21:32:32 debian kernel: RAMDISK: Loading 4556 blocks [1 disk] into ram disk... |^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^H/^H-^H\^H|^Hdone.
Jun 29 21:32:32 debian kernel: VFS: Mounted root (cramfs filesystem) readonly.
Jun 29 21:32:32 debian kernel: Freeing unused kernel memory: 148k freed
Jun 29 21:32:32 debian kernel: vesafb: probe of vesafb0 failed with error -6
Jun 29 21:32:32 debian kernel: NET: Registered protocol family 1
Jun 29 21:32:32 debian kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
Jun 29 21:32:32 debian kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
Jun 29 21:32:32 debian kernel: ICH5: IDE controller at PCI slot 0000:00:1f.1
Jun 29 21:32:32 debian kernel: PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 185
Jun 29 21:32:32 debian kernel: ICH5: chipset revision 2
Jun 29 21:32:32 debian kernel: ICH5: not 100%% native mode: will probe irqs later
Jun 29 21:32:32 debian kernel:     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
Jun 29 21:32:32 debian kernel:     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
Jun 29 21:32:32 debian kernel: hda: ST340016A, ATA DISK drive
Jun 29 21:32:32 debian kernel: hdb: WDC WD600BB-00CAA1, ATA DISK drive
Jun 29 21:32:32 debian kernel: Using anticipatory io scheduler
Jun 29 21:32:32 debian kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Jun 29 21:32:32 debian kernel: hda: max request size: 128KiB
Jun 29 21:32:32 debian kernel: hda: Host Protected Area detected.
Jun 29 21:32:32 debian kernel: ^Icurrent capacity is 66055248 sectors (33820 MB)
Jun 29 21:32:32 debian kernel: ^Inative  capacity is 78165360 sectors (40020 MB)
Jun 29 21:32:32 debian kernel: hda: 66055248 sectors (33820 MB) w/2048KiB Cache, CHS=65531/16/63, UDMA(100)
Jun 29 21:32:32 debian kernel:  /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 >
Jun 29 21:32:32 debian kernel: hdb: max request size: 128KiB
Jun 29 21:32:32 debian kernel: hdb: 117231408 sectors (60022 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
Jun 29 21:32:32 debian kernel:  /dev/ide/host0/bus0/target1/lun0: p1
Jun 29 21:32:32 debian kernel: hdc: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive
Jun 29 21:32:32 debian kernel: hdd: GCR-8521B, ATAPI CD/DVD-ROM drive
Jun 29 21:32:32 debian kernel: ide1 at 0x170-0x177,0x376 on irq 15
Jun 29 21:32:32 debian kernel: kjournald starting.  Commit interval 5 seconds
Jun 29 21:32:32 debian kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 29 21:32:32 debian kernel: Adding 1132540k swap on /dev/hda5.  Priority:-1 extents:1
Jun 29 21:32:32 debian kernel: EXT3 FS on hda1, internal journal
Jun 29 21:32:32 debian kernel: Generic RTC Driver v1.07
Jun 29 21:32:32 debian kernel: hdc: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
Jun 29 21:32:32 debian kernel: Uniform CD-ROM driver Revision: 3.20
Jun 29 21:32:32 debian kernel: hdd: ATAPI 52X CD-ROM drive, 128kB Cache, DMA
Jun 29 21:32:32 debian kernel: input: PS2++ Logitech MX Mouse on isa0060/serio1
Jun 29 21:32:32 debian kernel: SCSI subsystem initialized
Jun 29 21:32:32 debian kernel: sbp2: $Rev: 1219 $ Ben Collins <bcollins@debian.org>
Jun 29 21:32:32 debian kernel: Capability LSM initialized
Jun 29 21:32:32 debian kernel: mice: PS/2 mouse device common for all mice
Jun 29 21:32:32 debian kernel: ts: Compaq touchscreen protocol output
Jun 29 21:32:32 debian kernel: kjournald starting.  Commit interval 5 seconds
Jun 29 21:32:32 debian kernel: EXT3 FS on hda6, internal journal
Jun 29 21:32:32 debian kernel: EXT3-fs: mounted filesystem with ordered data mode.
Jun 29 21:32:32 debian kernel: ohci1394: $Rev: 1223 $ Ben Collins <bcollins@debian.org>
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:02:03.0[A] -> GSI 20 (level, low) -> IRQ 209
Jun 29 21:32:32 debian kernel: ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[209]  MMIO=[feaff800-feafffff]  Max Packet=[2048]
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 217
Jun 29 21:32:32 debian kernel: sk98lin: Network Device Driver v6.23
Jun 29 21:32:32 debian kernel: (C)Copyright 1999-2004 Marvell(R).
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:02:05.0[A] -> GSI 22 (level, low) -> IRQ 217
Jun 29 21:32:32 debian kernel: eth0: Yukon Gigabit Ethernet 10/100/1000Base-T Adapter
Jun 29 21:32:32 debian kernel:       PrefPort:A  RlmtMode:Check Link State
Jun 29 21:32:32 debian kernel: Intel 810 + AC97 Audio, version 1.01, 17:58:08 May 19 2005
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 201
Jun 29 21:32:32 debian kernel: i810: Intel ICH5 found at IO 0xee80 and 0xe800, MEM 0xfebff800 and 0xfebff400, IRQ 201
Jun 29 21:32:32 debian kernel: i810: Intel ICH5 mmio at 0xf89dd800 and 0xf89df400
Jun 29 21:32:32 debian kernel: i810_audio: Primary codec has ID 0
Jun 29 21:32:32 debian kernel: i810_audio: Audio Controller supports 6 channels.
Jun 29 21:32:32 debian kernel: i810_audio: Defaulting to base 2 channel mode.
Jun 29 21:32:32 debian kernel: i810_audio: Resetting connection 0
Jun 29 21:32:32 debian kernel: i810_audio: Connection 0 with codec id 0
Jun 29 21:32:32 debian kernel: ac97_codec: AC97  codec, id: ALG144 (Unknown)
Jun 29 21:32:32 debian kernel: i810_audio: only 48Khz playback available.
Jun 29 21:32:32 debian kernel: i810_audio: AC'97 codec 0 Unable to map surround DAC's (or DAC's not present), total channels = 2
Jun 29 21:32:32 debian kernel: usbcore: registered new driver usbfs
Jun 29 21:32:32 debian kernel: usbcore: registered new driver hub
Jun 29 21:32:32 debian kernel: USB Universal Host Controller Interface driver v2.2
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.0: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.0: irq 169, io base 0000ef00
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
Jun 29 21:32:32 debian kernel: hub 1-0:1.0: USB hub found
Jun 29 21:32:32 debian kernel: hub 1-0:1.0: 2 ports detected
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 177
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.1: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.1: irq 177, io base 0000ef20
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
Jun 29 21:32:32 debian kernel: hub 2-0:1.0: USB hub found
Jun 29 21:32:32 debian kernel: hub 2-0:1.0: 2 ports detected
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.2: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3
Jun 29 21:32:32 debian kernel: ip1394: $Rev: 1224 $ Ben Collins <bcollins@debian.org>
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.2: irq 185, io base 0000ef40
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
Jun 29 21:32:32 debian kernel: hub 3-0:1.0: USB hub found
Jun 29 21:32:32 debian kernel: hub 3-0:1.0: 2 ports detected
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 169
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.3: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.3: irq 169, io base 0000ef80
Jun 29 21:32:32 debian kernel: uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
Jun 29 21:32:32 debian kernel: hub 4-0:1.0: USB hub found
Jun 29 21:32:32 debian kernel: hub 4-0:1.0: 2 ports detected
Jun 29 21:32:32 debian kernel: ACPI: PCI interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 193
Jun 29 21:32:32 debian kernel: ehci_hcd 0000:00:1d.7: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller
Jun 29 21:32:32 debian kernel: ehci_hcd 0000:00:1d.7: irq 193, pci mem f8a5ec00
Jun 29 21:32:32 debian kernel: ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
Jun 29 21:32:32 debian kernel: ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Jun 29 21:32:32 debian kernel: hub 5-0:1.0: USB hub found
Jun 29 21:32:32 debian kernel: hub 5-0:1.0: 8 ports detected
Jun 29 21:32:32 debian kernel: Linux agpgart interface v0.100 (c) Dave Jones
Jun 29 21:32:32 debian kernel: agpgart: Detected an Intel 865 Chipset.
Jun 29 21:32:32 debian kernel: agpgart: Maximum main memory to use for agp memory: 941M
Jun 29 21:32:32 debian kernel: agpgart: AGP aperture is 128M @ 0xf0000000
Jun 29 21:32:32 debian kernel: cpci_hotplug: CompactPCI Hot Plug Core version: 0.2
Jun 29 21:32:32 debian kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Jun 29 21:32:32 debian kernel: pciehp: PCI Express Hot Plug Controller Driver version: 0.4
Jun 29 21:32:32 debian kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Jun 29 21:32:32 debian kernel: hw_random hardware driver 1.0.0 loaded
Jun 29 21:32:32 debian kernel: eth0: network connection up using port A
Jun 29 21:32:32 debian kernel:     speed:           100
Jun 29 21:32:32 debian kernel:     autonegotiation: yes
Jun 29 21:32:32 debian kernel:     duplex mode:     full
Jun 29 21:32:32 debian kernel:     flowctrl:        symmetric
Jun 29 21:32:32 debian kernel:     irq moderation:  disabled
Jun 29 21:32:32 debian kernel:     scatter-gather:  enabled
Jun 29 21:32:33 debian lpd[2417]: restarted
Jun 29 21:32:33 debian kernel: NET: Registered protocol family 10
Jun 29 21:32:33 debian kernel: Disabled Privacy Extensions on device c0300140(lo)
Jun 29 21:32:33 debian kernel: IPv6 over IPv4 tunneling driver
Jun 29 21:32:34 debian xfs: ignoring font path element /usr/lib/X11/fonts/cyrillic/ (unreadable) 
Jun 29 21:32:34 debian xfs: ignoring font path element /usr/lib/X11/fonts/CID (unreadable) 
Jun 29 21:32:35 debian Xprt_64: No matching visual for __GLcontextMode with visual class = 0 (32775), nplanes = 8
Jun 29 21:32:38 debian kernel: fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
Jun 29 21:32:38 debian kernel: [fglrx] Maximum main memory to use for locked dma buffers: 929 MBytes.
Jun 29 21:32:38 debian kernel: ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 169
Jun 29 21:32:38 debian kernel: [fglrx] module loaded - fglrx 8.14.13 [Jun  8 2005] on minor 0
Jun 29 21:32:38 debian kernel: [fglrx] Kernel AGP support doesn't provide agplock functionality.
Jun 29 21:32:38 debian kernel: [fglrx] AGP detected, AgpState   = 0x1f004a1b (hardware caps of chipset)
Jun 29 21:32:38 debian kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Jun 29 21:32:38 debian kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Jun 29 21:32:38 debian kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Jun 29 21:32:38 debian kernel: [fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
Jun 29 21:32:38 debian kernel: [fglrx] free  AGP = 121909248
Jun 29 21:32:38 debian kernel: [fglrx] max   AGP = 121909248
Jun 29 21:32:38 debian kernel: [fglrx] free  LFB = 122679296
Jun 29 21:32:38 debian kernel: [fglrx] max   LFB = 122679296
Jun 29 21:32:38 debian kernel: [fglrx] free  Inv = 0
Jun 29 21:32:38 debian kernel: [fglrx] max   Inv = 0
Jun 29 21:32:38 debian kernel: [fglrx] total Inv = 0
Jun 29 21:32:38 debian kernel: [fglrx] total TIM = 0
Jun 29 21:32:38 debian kernel: [fglrx] total FB  = 0
Jun 29 21:32:38 debian kernel: [fglrx] total AGP = 32768
Jun 29 21:32:48 debian kernel: [fglrx] AGP detected, AgpState   = 0x1f004a1b (hardware caps of chipset)
Jun 29 21:32:48 debian kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Jun 29 21:32:48 debian kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Jun 29 21:32:48 debian kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Jun 29 21:32:48 debian kernel: [fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
Jun 29 21:32:48 debian kernel: [fglrx] free  AGP = 121909248
Jun 29 21:32:48 debian kernel: [fglrx] max   AGP = 121909248
Jun 29 21:32:48 debian kernel: [fglrx] free  LFB = 122679296
Jun 29 21:32:48 debian kernel: [fglrx] max   LFB = 122679296
Jun 29 21:32:48 debian kernel: [fglrx] free  Inv = 0
Jun 29 21:32:48 debian kernel: [fglrx] max   Inv = 0
Jun 29 21:32:48 debian kernel: [fglrx] total Inv = 0
Jun 29 21:32:48 debian kernel: [fglrx] total TIM = 0
Jun 29 21:32:48 debian kernel: [fglrx] total FB  = 0
Jun 29 21:32:48 debian kernel: [fglrx] total AGP = 32768
Jun 29 21:35:44 debian kernel: [fglrx] AGP detected, AgpState   = 0x1f004a1b (hardware caps of chipset)
Jun 29 21:35:44 debian kernel: agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
Jun 29 21:35:44 debian kernel: agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
Jun 29 21:35:44 debian kernel: agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Jun 29 21:35:44 debian kernel: [fglrx] AGP enabled,  AgpCommand = 0x1f004312 (selected caps)
Jun 29 21:35:44 debian kernel: [fglrx] free  AGP = 121909248
Jun 29 21:35:44 debian kernel: [fglrx] max   AGP = 121909248
Jun 29 21:35:44 debian kernel: [fglrx] free  LFB = 122679296
Jun 29 21:35:44 debian kernel: [fglrx] max   LFB = 122679296
Jun 29 21:35:44 debian kernel: [fglrx] free  Inv = 0
Jun 29 21:35:44 debian kernel: [fglrx] max   Inv = 0
Jun 29 21:35:44 debian kernel: [fglrx] total Inv = 0
Jun 29 21:35:44 debian kernel: [fglrx] total TIM = 0
Jun 29 21:35:44 debian kernel: [fglrx] total FB  = 0
Jun 29 21:35:44 debian kernel: [fglrx] total AGP = 32768
Jun 29 21:52:31 debian -- MARK --
 
Old 06-29-2005, 11:32 PM   #29
byte.chaser
Member
 
Registered: Jun 2004
Distribution: debian 3.1 etch
Posts: 76

Original Poster
Rep: Reputation: 15
i dunno if its needed but here glxgears and fgl_glxgears

Code:
nexus@debian:~$ glxgears
10869 frames in 5.0 seconds = 2173.800 FPS
13395 frames in 5.0 seconds = 2679.000 FPS
13394 frames in 5.0 seconds = 2678.800 FPS
13391 frames in 5.0 seconds = 2678.200 FPS
13395 frames in 5.0 seconds = 2679.000 FPS
13395 frames in 5.0 seconds = 2679.000 FPS
13394 frames in 5.0 seconds = 2678.800 FPS
13394 frames in 5.0 seconds = 2678.800 FPS
13394 frames in 5.0 seconds = 2678.800 FPS
Code:
nexus@debian:~$ fgl_glxgears
2555 frames in 5.0 seconds = 511.000 FPS
2652 frames in 5.0 seconds = 530.400 FPS
2652 frames in 5.0 seconds = 530.400 FPS
2667 frames in 5.0 seconds = 533.400 FPS
2675 frames in 5.0 seconds = 535.000 FPS
2647 frames in 5.0 seconds = 529.400 FPS
2659 frames in 5.0 seconds = 531.800 FPS
2654 frames in 5.0 seconds = 530.800 FPS
Code:
nexus@debian:~$ glxinfo | grep direct
direct rendering: Yes
 
Old 06-30-2005, 04:27 AM   #30
tmantist
Member
 
Registered: Jun 2005
Location: Florida, USA
Distribution: ~~~Slackware~~~
Posts: 86

Rep: Reputation: 15
also post your xserver config file so that i can see your config
 
  


Reply
Page 2 of 3 1 2 3



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Random Server Crashes teamchachi Linux - General 2 10-20-2005 08:32 AM
OpenGL random crashes m00t00 Linux - Games 3 10-01-2004 06:51 AM
2.6.7 kernel random crashes chakkerz Linux - General 4 06-28-2004 07:05 PM
random system crashes gbrad Linux - Hardware 1 01-04-2004 09:22 PM
random crashes of programs...... vyeperman3001 Linux - Software 6 04-16-2003 02:15 PM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian

All times are GMT -5. The time now is 03:15 PM.

Contact Us - Advertising Info - Rules - Privacy - LQ Merchandise - Donations - Contributing Member - LQ Sitemap -
Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration