LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian
User Name
Password
Debian This forum is for the discussion of Debian Linux.

Notices


Reply
  Search this Thread
Old 11-15-2006, 12:38 PM   #1
fourat
LQ Newbie
 
Registered: Jul 2006
Posts: 8

Rep: Reputation: 0
Failing bootcd


Am getting a problem using bootcd on debian etch:

Quote:
# bootcdwrite
To see full output: tail -f /var/log/bootcdwrite.log
--- Checking for possible Problems ---
/var will be cleaned (apt-get clean) !

Ok to continue? (y/n) y

--- Cleanup ---
20995 blocks
--- Sizes in KByte (du -klsc ) ---
NOT_TO_CD = . . . . . . . . . . . . . . . . . . . . . . . . . . . 0
CD_ALL (SRCDISK v NOT_TO_CD) = . . . . . . . . . . . . . . . . . . 512056
Needed = CD_ALL - NOT_TO_CD . . . . . . . . . . . . . . . . . . . 512056
CD (650 MB) = . . . . . . . . . . . . . . . . . . . . . . . . . . 665600
OK - SRCDISK does fit on CD (Needed <= CD)
VAR = . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34453808
OK - enough space in /var/spool/bootcd (Needed <= VAR)
NOT_TO_RAMCD (NOT_TO_RAM v NOT_TO_CD) = . . . . . . . . . . . . . 0
RAM_ALL (etc v home v root v NOT_TO_RAM v NOT_TO_CD) = . . . . . . 8636
Needed RAM (RAM_ALL - NOT_TO_RAMCD) = . . . . . . . . . . . . . . 8636
90 % of RAM = . . . . . . . . . . . . . . . . . . . . . . . . . . 14745
OK - enough RAM (Needed RAM <= 90 % of RAM)
--- Building Modifications ---
--- Creating /ram[1|2].cpio.gz for FASTBOOT ---
--- Creating CD-Image ---
Size of boot image is 4 sectors -> No emulation
mkisofs: File '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/ep_81/bEndpointAddress' did shrink.
exit=255
--- OUTPUT from <mkisofs -graft-points -R -b isolinux/isolinux.bin -c isolinux/boot.cat -no-emul-boot -boot-load-size 4 -boot-info-table -o /var/spool/bootcd/cdimage -x /proc -x /var/spool/bootcd -x /var/log/bootcdwrite.log -x /etc -x /var -x /tmp -x /dev -x /home -x /root -x /etc/mtab -x /etc/cron.daily/find -x /etc/cron.daily/standard -x /etc/fstab -x /etc/ssh/ssh_host_rsa_key -x /etc/ssh/ssh_host_dsa_key -x /etc/ssh/ssh_host_rsa_key.pub -x /etc/ssh/ssh_host_dsa_key.pub -x /usr/share/bootcd/bootcd-run.lib /=/ /=/var/spool/bootcd/changes /home.ro/=/home /root.ro/=/root /var.ro/=/var /etc.ro/=/etc /dev.ro/=/dev> ---
mkisofs: File '/sys/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/ep_81/bEndpointAddress' did shrink.
exit=255
--- (e)xit (r)edo (i)gnore ---
here's my lspci:

Quote:
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 01)
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01)
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 81)
00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 01)
00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 01)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
02:08.0 Ethernet controller: Intel Corporation 82801DB PRO/100 VE (LOM) Ethernet Controller (rev 81)
02:0c.0 Communication controller: Conexant Unknown device 2702 (rev 01)
 
Old 11-15-2006, 08:45 PM   #2
Dutch Master
Senior Member
 
Registered: Dec 2005
Posts: 1,686

Rep: Reputation: 124Reputation: 124
Well, here is the source of the problem:
Quote:
mkisofs: File /sys/devices/pci0000:00/0000:00:1d.1/usb2/2-2/2-2:1.0/ep_81/bEndpointAddress' did shrink.
Are you attempting to write the file directly to a USB device? If you are, try writing it to your local harddisk and copy it later to the USB device.
 
  


Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is Off
HTML code is Off



Similar Threads
Thread Thread Starter Forum Replies Last Post
bootcd? tsunami_imcool Linux - Newbie 1 09-12-2006 09:57 AM
eth1 failing on boot, IEEE firewire card driver failing, help jackuss_169 Linux - Laptop and Netbook 5 03-05-2005 07:34 AM
LILO install failing, Boot failing, but Installation fine. sramelyk Slackware 9 08-23-2003 02:37 PM
lfs bootcd.. roofy Linux From Scratch 6 05-23-2003 08:33 PM
X failing to load; AddScreen/InitScreen failing for driver 0 weblion Linux - Software 1 08-01-2002 06:14 AM

LinuxQuestions.org > Forums > Linux Forums > Linux - Distributions > Debian

All times are GMT -5. The time now is 03:08 AM.

Main Menu
Advertisement
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
Open Source Consulting | Domain Registration