How To Mount NTFS Partions In RHEL5 Options
Posted 06-24-2008 at 04:23 AM by prasun_mitra
You Will Need Two Packages
a] fuse-2.6.5 or Higher
b] ntfs-3g-1.417 or Higher
which is freely available or you can download it the below link..
http://rapidshare.com/files/124042573/NTFS-3G.zip
Step 1] Install GCC and Kernel Developemnt Package..
#yum install gcc*
#yum install kernel-devel*
Step 2] Unzip NTFS-3G.zip
a} Uncompress fuse-2.6.5.tar And Copy to /root
b} Uncompress ntfs-3g-1.417 And Copy To /root
Step 3]
#cd fuse-2.6.5
#./configure
#make
#make Install
---------------------------------------------------------------
#cd
#cd ntfs-3g-1.417
#./configure
#make
#make Install
Step 4] Mount the /dev/hda1 {Your NTFS Partion}
#Mount -t ntfs-3g /dev/hda1 /mnt
***Note: - Edit /etc/fstab to Auto Mount the Partions. Use ntfs-3g as
file system Type
Following is the Example of /etc/fstab file : -
LABEL=/ / ext3
defaults 1 1
LABEL=/boot /boot ext3
defaults 1 2
devpts /dev/pts devpts
gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs
defaults 0 0
LABEL=/home /home ext3
defaults 1 2
proc /proc proc
defaults 0 0
sysfs /sys sysfs
defaults 0 0
/dev/sda9 swap swap
defaults 0 0
/dev/sda6 /mnt/winh ntfs-3g
defaults 0 0
/dev/sda7 /mnt/wine ntfs-3g
defaults 0 0
Contact me if You face any problem mounting ntfs
partions..
Enjoy :)
a] fuse-2.6.5 or Higher
b] ntfs-3g-1.417 or Higher
which is freely available or you can download it the below link..
http://rapidshare.com/files/124042573/NTFS-3G.zip
Step 1] Install GCC and Kernel Developemnt Package..
#yum install gcc*
#yum install kernel-devel*
Step 2] Unzip NTFS-3G.zip
a} Uncompress fuse-2.6.5.tar And Copy to /root
b} Uncompress ntfs-3g-1.417 And Copy To /root
Step 3]
#cd fuse-2.6.5
#./configure
#make
#make Install
---------------------------------------------------------------
#cd
#cd ntfs-3g-1.417
#./configure
#make
#make Install
Step 4] Mount the /dev/hda1 {Your NTFS Partion}
#Mount -t ntfs-3g /dev/hda1 /mnt
***Note: - Edit /etc/fstab to Auto Mount the Partions. Use ntfs-3g as
file system Type
Following is the Example of /etc/fstab file : -
LABEL=/ / ext3
defaults 1 1
LABEL=/boot /boot ext3
defaults 1 2
devpts /dev/pts devpts
gid=5,mode=620 0 0
tmpfs /dev/shm tmpfs
defaults 0 0
LABEL=/home /home ext3
defaults 1 2
proc /proc proc
defaults 0 0
sysfs /sys sysfs
defaults 0 0
/dev/sda9 swap swap
defaults 0 0
/dev/sda6 /mnt/winh ntfs-3g
defaults 0 0
/dev/sda7 /mnt/wine ntfs-3g
defaults 0 0
Contact me if You face any problem mounting ntfs
partions..
Enjoy :)