| Notices |
Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
Are you new to LinuxQuestions.org? Visit the following links:
Site Howto |
Site FAQ |
Sitemap |
Register Now
If you have any problems with the registration process or your account login, please contact us. If you need to reset your password, click here.
|
|
By dissident_goodchild at 2007-10-11 14:22
|
|
**** UBUNTU (testing in 6.10 and 7.04)
INSTALLATION
For usbstick D-Link DWK-G122 rev. C1 (ID 07d1:3c03) you use the ralink chipset driver: (use lsusb command to see)
1. start the system with the device disconnected to avoid conflicts
2. install the correct driver
- download serialmonkey driver: http://rt2x00.serialmonkey.com/rt73-cvs-daily.tar.gz
- extract and install (read file README for details):
since the Module directory:
sudo make
sudo make install
sudo modprobe rt73
3. unloads the modules in the system start that do not work correctly (use the lsmod command to see entry usbcore while device is connected)
- edit file /etc/modprobe.d/blacklist:
sudo gedit /etc/modprobe.d/blacklist
- adds the lines:
# causes the conflict with the correct driver rt73
blacklist rt73usb
blacklist rt2570
4. connect the device and temporally unloads the modules to avoid to restart:
sudo rmmod rt73usb
sudo rmmod rt2570
5. if there is not errors, configures your connection with the network administrator
**** OPENSUSE (testing in 10.2 and 10.3)
Use commands in terminal. Use the commands separated by | in different shots.
PRE-UP SCRIPT FILE:
# install rt73 driver (www.serialmonkey.com), create connection and configure this with traditional method option
# create a script file with this lines to rise device on boot and copy to: sudo cp <directory>/pre-up-wlan0 /etc/sysconfig/network/scripts/pre-up-wlan0
# change permission: sudo chmod 755 /etc/sysconfig/network/scripts/pre-up-wlan0
# edit file /etc/sysconfig/network/ifcfg-wlan0 and add the line PRE_UP_SCRIPT='pre-up-wlan0': su | gedit /etc/sysconfig/network/ifcfg-wlan0
# edit file /etc/sysconfig/network/config to deactivating rename interfaces network process with FORCE_PERSISTENT_NAMES=no (if line exists): su | gedit /etc/sysconfig/network/config
ifconfig wlan0 up
|
|
|
|
All times are GMT -5. The time now is 10:24 PM.
|
I need some real help I've downloaded the driver from serialmonkey.com and have unpacked it once unpacked according to the readme file I typed #make install but this doesnt install anything i am using ubuntu 8.04 any help would greatly appreciated.
. does it support radius authentication??????