LinuxQuestions.org
Help answer threads with 0 replies.
Go Back   LinuxQuestions.org > Linux Answers > Networking
User Name
Password

Notices

By philsta at 2006-08-30 12:00
HOWTO wirless working on Thinkpad R40e with Belkin Wireless G notebook card

--------------------------------------------------------------------------------

First install Fedora Core 5 (make sure you use the acpi=off option to boot the CD (F6 and type it in at the end of the line))

Next enable the livna repository (http://rpm.livna.org/), just follow the instructions. Then execute the following as root to begin installing madwifi:

yum update

yum install madwifi

If you have no wired connection, just update wpa_supplicant and install madwifi from the livna repository. How, you ask? Try “sneakernet“.

Now dowload the excellent Rt2x00 driver from here: http://rt2x00.serialmonkey.com/wiki/index.php/HOWTOS making sure you follow the instructions on building and installing the modules.

After many nightmares with drivers from the install disk and other places I found this one works very well also it beats using Ndiswrapper.

NOTE: You will probably have to install gcc first:

yum install gcc

To build the drivers use:

untar package, open a terminal and: cd to modules dir followed by:

make clean
make
make install

Then, as root open up /etc/modprobe.conf in your favorite editor (you could use nano for example) and add the following:
alias ra0 rt2500

I added the line “ifup ra0″ to the file /etc/rc.d/rc.local
This way, the wireless interface is activated after wpa_supplicant is started, when the system boots, like it’s supposed to. It’s probably not the best solution, but it works.

Next open up /etc/sysconfig/wpa_supplicant and change it to this:

INTERFACES=”-ira0″
DRIVERS=”-Drt2500”

Finally, open /etc/wpa_supplicant.conf and edit it to suit your network.

Save, close AND reboot.

Now we can finally start using some GUI’s! Yay!
First go to System –> Administration –> Network. Select New –> Wireless connection. Then select the ra0 (it should be listed!) and continue. Now set it to managed and set the SSID to auto. Do NOT set a key or SSID! This will be done by wpa_supplicant. The rest is standard stuff.
Then go to System –> Administration –> Services. Look up “wpa_supplicant” and check the tickbox next to it. I think that should also start the daemon, but if it doesn’t you can just start it manualy (right click and select start). It should tell you that it was succesfull.
Then go back to that Network configuration GUI we used. You may now deactivate the wired network and then activate the wireless network. You may also wish to set this interface to start on every boot.

And that is it! It really amazed me why something as simple and basic as this is so extremely poorly documented.


Taken partly from :

https://menzonius.wordpress.com/2006...pa_supplicant/

Good luck


  



All times are GMT -5. The time now is 02:04 AM.

Main Menu
Advertisement

My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
Twitter: @linuxquestions
identi.ca: @linuxquestions
Facebook: linuxquestions Google+: linuxquestions
Open Source Consulting | Domain Registration