Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
First I made a 256Mb FAT16 partition on my HDD. Let us call this partition X:\
Set the X:\ partition to be active
Right click My Computer > Manage > Disk Management.
(you can make the partition here and set it active)
Now extract the SLAX iso image in the newly created X:\ using Winrar
then copy the files "vmlinuz" and "initrd.gz" which are in the X:\boot directory to X:\ - this means to copy them one level up
Then open the file isolinux.cfg in wordpad and remove boot\ ahead of vmlinuz and initrd: so, where there is "boot\vmlinuz" it becomes "vmlinuz" and wherever there is "boot\initrd" it becomes "initrd"
(You can use the "replace all" function in Wordpad to do this instead of looking for them individually in case you miss anything)
Save the file as syslinux.cfg
Extract the syslinux zip file somewhere and then open the command prompt
cd into the syslinux directory
cd once again to the win32 directory
win32:\> syslinux.exe X: -f
Reboot and Enter the BIOS (usually pressing [del] or [F1] at the time of boot)
Set the USB device as primary boot device.
Reboot and if everything was done properly it should boot from the USB drive.
This assumes that your BIOS will allow you to boot from a USB device.