LinuxQuestions.org
Have you listened to LQ Radio?
Go Back   LinuxQuestions.org > HCL > Network Cards > Netgear
Reload this Page Netgear MA311
User Name
Password

Notices


Search · Register · Submit New Product ·
 

Netgear MA311
Reviews Views Date of last review
8 6433 10-17-2005
spacer
Recommended By Average Price Average Rating
100% of reviewers $47.57 9.5



Description: This card should work with both the linux-wlan drivers, and the wireless tools (by Jean Tourrilhes).

Under wireless tools (i.e. iwconfig), use the orinoco_pci module.
Keywords: 802.11b wireless PCI
/sbin/lspci output: 00:09.0 Network controller: Harris Semiconductor Prism 2.5 Wavelan chipset (rev 01)
Chipset: Prism2.5
Connection Type: PCI


Author
Post A Reply 
Old 11-24-2003, 08:44 PM   #1
cnjohnson
 
Registered: Nov 2002
Distribution: FreeBSD 6.0
Posts: 544
Would you recommend the product? yes | Price you paid?: $55.00 | Rating: 10

Kernel (uname -r): 5.1-RELEASE
Distribution: freeBSD



[Log in to get rid of this advertisement]
The Netgear MA311 works right out of the box with freeBSD 5.1 & 4.8

The card provides excellent through put, and has decent range indoors (about 80 feet through 2 inside and 2 outside walls.

All in all, an excellent choice that is well supported.

With the wlan-ng drivers, this card works wonderfully well with linux.
is offline    
Old 12-03-2003, 06:21 PM   #2
superbondbond
 
Registered: Nov 2002
Distribution: Slackware 10.x, OZ 3.5.2, LBT
Posts: 668
Would you recommend the product? yes | Price you paid?: $60.00 | Rating: 10

Kernel (uname -r): 2.4.22
Distribution: Slacware 9.1


This card works very easily with the orinoco_pci module (ships with Slackware 9.1) as well as the hostap_pci module.

I seem to get much better speed performace out of the orinoco module.
is offline    
Old 12-05-2003, 03:43 AM   #3
SwiftTools
 
Registered: Dec 2003
Posts: 1
Would you recommend the product? yes | Price you paid?: $46.00 | Rating: 8

Kernel (uname -r): 2.4.20 (patched)
Distribution: RH7.3


Tested on a patched/recompiled 2.4.20 kernel (vanilla 2.4.20 source + bcm4400 driver added). I got the latest sources 0.13e of orinoco_pci and had to get version26 of iw. The trick to copy wireless.h in either /usr/include/linux and kernel sources was a key thing to make the iwconfig work perfectly.

On RH 2.4.18-13 (from out-of-the-box RH7.3), with pre-version 16 iwconfig tools worked immediately (Ad-Hoc mode). But long transfers (over 10Mb) always ended up in Error -110 Tx like messages.

Aim was: Cable Modem -> Linux Box used as router/fw/nat (as well as workstation and play station), that contains another Eth card and MA311. WindowsXP laptop with MA521 connected to linux box thru wifi (of course).

Using Ad-Hoc mode + encryption. Configured DHPC on wifi.
is offline    
Old 02-20-2004, 03:21 PM   #4
jovo
 
Registered: Jul 2003
Distribution: SuSe 8.1
Posts: 8
Would you recommend the product? yes | Price you paid?: $70.00 | Rating: 10

Kernel (uname -r): 2.4.19-4GB
Distribution: Suse 8.1


When I wanted to buy a wireless PCI card I found a warning about not using the wireless tools for the MA311. The card seems to work but after some time you got some problems.

Use wlan-ng instead.
is offline    
Old 03-19-2004, 08:37 AM   #5
X_Ch4n
 
Registered: Mar 2004
Distribution: slackware 9.1
Posts: 2
Would you recommend the product? yes | Price you paid?: None indicated | Rating: 8

Kernel (uname -r): 2.4.22
Distribution: slackware 9.1


hi
i've bought this card but i've a problem
i use the orinoco_pci driver and it goes perfectly (i can ping my laptop very well) but when i do the 'startx' command (or when i do any other command to start x server) the card doesn't works (i can't ping anything)
can u help me plis?

P.S. i use this card in ad-hoc mode, i haven't tested it in infrastructure mode
is offline    
Old 06-17-2004, 04:52 PM   #6
DvChWi
 
Registered: Mar 2004
Distribution: Slackware 9.1
Posts: 24
Would you recommend the product? yes | Price you paid?: $18.00 | Rating: 10

Kernel (uname -r): 2.4.22
Distribution: Slackware 9.1


Amazingly compatible. Just typed "iwconfig" than "dhcpcd" and I was online! Took me longer to configure my mouse than this guy. Its been very reliable, haven't had any dropoff problems or anything. Though this is discontinued, you can still find these out there at very low prices. Highly reccommended if you don't need 802.11g speeds.
is offline    
Old 05-24-2005, 01:25 PM   #7
hnaparst
 
Registered: Aug 2003
Distribution: Mepis 3.3.1
Posts: 3
Would you recommend the product? yes | Price you paid?: $50.00 | Rating: 10

Kernel (uname -r): 2.6.11-1286
Distribution: Fedora Core 4, Test 3


Zero config with Fedora. Highly recommended card. Shows up as Intersil Prism 2.5.
is offline    
Old 10-17-2005, 07:03 AM   #8
07mackenzie
 
Registered: Aug 2004
Posts: 94
Would you recommend the product? yes | Price you paid?: $34.00 | Rating: 10

Kernel (uname -r): 2.6.11-1286
Distribution: Fedora Core 4


No configuration needed with FC4. If you have troubles, always try out iwconfig/dhcpcd. But it worked out of the box for me.

Got it for extra cheap off of ebay :)

Great product combo!
is offline    





All times are GMT -5. The time now is 01:48 PM.

Contact Us - Advertising Info - Rules - LQ Merchandise - Donations - Contributing Member - LQ Sitemap - LinuxQuestions.org - Home
Main Menu
My LQ
Write for LQ
LinuxQuestions.org is looking for people interested in writing Editorials, Articles, Reviews, and more. If you'd like to contribute content, let us know.
Main Menu
Syndicate
RSS1  Latest Threads
RSS1  LQ News
RSS2  LQ Podcast
RSS2  LQ Radio
Open Source Consulting | Domain Registration