LinuxQuestions.org HCL - Multi-Card Reader (6-in-1)

superbondbond · 11-06-2003, 06:53 PM

I didn't initially expect it to work, but to my surprise it was found immediately upon booting my system. I am running Slackware 9.1 with a stock kernel (includes USB core, USB mass storage).

Device was designated /dev/sda1, and after adding an entry in my /etc/fstab I use it just like another disk drive.

I have encountered no problems with this device on my system.
It works great!

gregkise · 03-30-2004, 10:41 AM

No problems at all. Works just like superbondbond says.

MCSparks · 05-06-2004, 12:26 PM

Had no problems with it on Mandrake 10. Plugged it in the USB, powered on my workstation and it was detected and mounted (/mnt/removable) with no interaction. Also a 'removable drive' icon appeared on my Gnome desktop.

Paid £16.99 (£19.94 inc p&p) ($30.50/$35.75 approx) from http://www.mymemory.co.uk, who's delivery was also pretty good.

Would recommend as a multi-format reader with xD capabilities.

06-18-2004, 09:44 AM

Takes quite long to mount thing under SUSE (~ 60 seconds), but no manual operations are involved.

silencestone · 04-28-2007, 06:00 AM

Works great. On boot-up, each slot gets detected. Here's the dmesg for that:

Code:

[17179602.056000] usb-storage: device scan complete
[17179602.056000]   Vendor: Lexar     Model: Media Inc. SM/xD  Rev: 009E
[17179602.056000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179602.056000]   Vendor: Lexar     Model: Media Inc. CF     Rev: 009E
[17179602.056000]   Type:   Direct-Access                      ANSI SCSI revision: 00
[17179602.060000]   Vendor: Lexar     Model: Media Inc. SD/MS  Rev: 009E
[17179602.060000]   Type:   Direct-Access                      ANSI SCSI revision: 00

I've only used it for Compact Flash and XD cards, but they're automatically detected and mounted upon insertion. Using 2 card-slots simultaneously is fine, too.

Faults:
Sometimes, a freshly inserted card is not detected (the second indicator light on the device won't come on). Unplugging and replugging the USB cord gets it working.