Welcome to LinuxQuestions.org, a friendly and active Linux Community.
You are currently viewing LQ as a guest. By joining our community you will have the ability to post topics, receive our newsletter, use the advanced search, subscribe to threads and access many other special features. Registration is quick, simple and absolutely free. Join our community today!
Note that registered members see fewer ads, and ContentLink is completely disabled once you log in.
* Biostar M7VIG 400 Socket A mATX Motherboard w/Geode NX 1750 CPU
* General Features:
* Socket A AMD Geode NX 1750 CPU INCLUDED
* VIA KM266 Pro+ VT8235 chipset
* Socket A
* microATX form factor
* 200/266/333 MHz system interface speed
* Supports up to 2.0 GB DDR266/333/400 SDRAM
* Two (2) UDMA/33/66/100/133 IDE controllers
* One (1) floppy controller
* S3 UniChrome Pro 2D/3D Graphics
* 64 MB Shared Memory
* C-Media CMI9761A 6-Channel AC'97 CODEC
* VIA VT6103 ethernet controller
* Expansion Slots:
* One (1) 4x AGP slot
* Three (3) PCI slots
* One (1) CNR slot
* Two (2) 184-pin DIMM slots
* I/O Ports:
* Two (2) PS/2 ports
* One (1) 9-pin Serial port
* One (1) Parallel port
* One (1) 15-pin VGA port
* Two (2) USB ports
* Mic in, Line in, Line out
* One (1) RJ-45 ethernet jack
* Hardware Monitor Function:
* CPU/System Fan Speed
* System Voltage
* CPU/System Temperature
* Overall Dimensions:
* 7.64 inches x 9.61 inches (W x L)
* CPU Information:
* AMD Geode NX 1750 Processor
* 1.4 GHz Frequency
* 128Kbyte L1 cache
* 256Kbyte L2 cache with hardware data prefetch
* 266MHz AMD processor system bus with 133MHz Front Side Bus (FSB)
* Integrated support for 3DNow! technology, MMX and SSE instruction sets
* Advanced 0.13µm fabrication process for higher frequency scaling and lower power consumption
* 14 Watts Average Power Consumption
* 25 Watts Maximum Thermal Design Power (TDP)
00:00.0 Host bridge: VIA Technologies, Inc. VT8378 [KM400/A] Chipset Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0f.0 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 MX 440] (rev a3)
Would you recommend the product? yes | Price you paid? (in USD): $84.99 | Rating: 8
Kernel (uname -r):
2.6.16.29.tex1
Distribution:
PCLinuxOS 0.93
This board is interesting because besides being normal Socket A board it recognizes and accepts also Geode NX processors. I use it with low-power consumption AMD Geode NX 1750 CPU (14 W at 1.4 GHz, Bogomips: 2744) in a small AOpen H340 case for a 365/24 small network management node. With additional grahics card, low-profile GeForce4 MX 440 it shows 1005 FPS with glxgears.
Installation of PXLinuxOS 0.92, later 0.93 was easy and absolutely with no problems. During about 6 months non-stop work there has not been any problem with this m/b or PC. It just works. It is also not overheating because of low power consumption.
This m/b has on-board S3 UniChrome Pro 2D/3D Graphics which might be better :) but probably would be good enough for many applications. I have not tested and am not using sound features of this board.
LinuxQuestions.org is looking for people interested in writing
Editorials, Articles, Reviews, and more. If you'd like to contribute
content, let us know.
